This machine is recommended and/or approved by BMW, KIA, Lexus, Mazda and Toyota The Synergic MIG Welder #572 is a 220 volt single phase mig welder with output power ranging from 25 amps to 200 amps. Designed and developed for today's collision repair shop, the Synergic Mig 572 is supplied with built-in synergic programs for welding high strength steels, MIG brazing and galvanized steel. This welder is capable of welding aluminum with trouble free wire feed when using the optional Push-Pull gun #2003. The built in programs may be updated easily via the internet by using the optional Interface Kit #136. • • • • • Mig Brazing of galvanized metals Aluminum Welding Safe to use near computers, PTC, etc. Pre-programmed settings for fast & easy set up. Push-Pull Gun capable for trouble free aluminum wire feed. • Download updates to keep you current to the newest welding programs. Technical Specifications CONTROL PANEL A. Selection key B. Welding program indicator LED C. Spot welding time indicator LED D. Stitch weld time indicator LED E. "Burn Back" indicator LED F. Thermostat tripped indicator LED G. Push-Pull Gun LED H. Connector for Mig Gun I. Push Pull gun connector L. Ground cable connector N. On/Off & Voltage range selector P. Wire speed & current adjustment Q & R. Adjustment keys S. Display • • • • • • • • 220 volt single phase@ 40 amps 50/60 Hz Output power : 25 - 200 amps Duty Cycle 25% @ 150 amps 100% @ 70 amps Mig Gun is sold separately. Uses Standard gun MB15, Heavy Duty 1242 or Push Pull Gun 2003 Power cord 8" ( 2.5 m) Ground cable 9' (3 m) Dimensions: 21" x 33" X 26" Weight: 112 lbs ( 51 kg) Art # Description Art. 136 Software Upgrade Kit Art. 1242 Heavy Duty 280 amp mig torch Art. 1450 Flowmeter Regulator Art. 2003 Push-Pull Gun Art. MB15 Standard mig torch 10ft. Art. 136 (not pictured) Art. 1242 Aluminum Feed Rollers 3080906 3080914 3080915 0.6 0.8 dia. 0.8 1.0 dia. 1.2 1.6 dia. Art. 1450 CEBORA Push Pull Gun (Model #2003) Recommended and/or approved by BMW, Ferrari, KIA, Land Rover, Lexus, Mazda, Maserati, Mercedes-Benz, and Toyota • Feeder is built into the grip. No wire feed hangups. • Control the current up or down from the handle. No turning back to the machine. • Feeds all solid core wires with a diameter of 0.6, 0.8 and 1.0. • Especially suited for aluminum wire. Alum. Feed Rollers
© Copyright 2024 ExpyDoc