FROM DAVALOS Barbara BERTRANDT INGENIEURBUERO GMBH [email protected] Lab in -> Kruemke 1 - Tappenbeck In ARP -> Blohmstr 10 Hamburg 38479 / 21079 Germany OUR REFERNCE FOR THE ATTENTION OF: DATE 14/11/2014 E-MAIL RP1431370 Ind. A ARP-ID of the Company 142398 Subject: Attestation of Airbus Testing Qualification WENSKI Andreas Test Engineer RODE Christian Laboratory Manager Winkler Guido Validation Engineer Zahrte-Ehnert Nicole Quality assurance manager Alexander-Christian Rehm Lewandowski Uwe Laboratory Dear Madam, Dear Sir, You will find attached the Attestation of Airbus Testing Qualification referenced RP1431370 Ind. A. This Qualification (or extension of Qualification) is valid until end of 2016, except special comment in the Test List given next page(s). We remind you that the extension of your Airbus Testing Qualification depends on your monitoring on a Quality Aspect and on a Technical Aspect. On a Quality aspect, we kindly ask you to indicate us any modification which could have a Quality impact. Concerning our Technical requirements, we kindly ask you to participate at least every 2 years (thus at the latest in 2016 or in the year indicated in the Attestation) to the PTP organized by EXOVA for the tests you perform on Airbus Products. You will find all the necessary information on the following website: - http://www.centech-sa.fr/ptp/ for Metallic Materials - http://www.centech-sa.fr/ptpcomposite/ for Composite Materials In case of PTP results out of tolerances, the extension of Qualification will be reduced to one year, subject to acceptance by Airbus of your Root Cause Analysis and associated Corrective Actions and to a new participation to the PTP if necessary. On the other hand, you will have to supply us the results of your Internal Homogeneity Studies performed in the meanwhile. Please note that this Qualification may be cancelled by Airbus in case of major incident(s) detecting on one or several test processes. We wish you good reception and remain at your disposal for any further information or question. Yours sincerely, Barbara DAVALOS Procurement Operations Quality System - POLV Airbus Laboratories Qualification Manager © Airbus SAS, 2014. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied. Airbus SAS Registered office: Société par actions simplifiée au capital de 2.704.375 Euros 1, rond-point Maurice Bellonte Page 1 / 5 RCS Toulouse 383 474 81 31700 Blagnac, France ATTESTATION OF AIRBUS TESTING QUALIFICATION Qualification reference: RP1431370 Ind. A We hereby declare the company: File followed by: DAVALOS Barbara BERTRANDT INGENIEURBUERO GMBH ARP-ID: 142398 Address: Lab in -> Kruemke 1 - Tappenbeck In ARP -> Blohmstr 10 Hamburg 38479 / 21079 Germany Qualified or Authorised to proceed for the following Tests processes until end of 2016: Test Standard(s) Test label Test category Qualif. Status ATP Expiration date Next PTP participation required Remark Other test - Specify in Remark Qualified Icing - DO160 Plastics / Metall alloys Other test - Specify in Remark Qualified Operational Shocks and Crash Safety RTCA - DO-160_Section 7.3.2 Crash Safety Alternate Test Procedure (Impulse) Other test - Specify in Remark Qualified Operational Shocks and Crash Safety RTCA - DO-160_Section 7.3.3 Crash Safety Test Procedure 2 (Sustained) Other test - Specify in Remark Qualified Vibration RTCA - DO-160_Section 8.5.1 Standard Vibration Test Procedure-Fixed Wing Aircraft- Sinusoidal Other test - Specify in Remark Qualified Vibration RTCA - DO-160_Section 8.5.2 Standard Vibration Test Procedure-Fixed Wing Aircraft- Random Other test - Specify in Remark Qualified Vibration RTCA - DO-160_Section 8.6 High-Level, Short Duration Vibration Test Procedure Other test - Specify in Remark Qualified Vibration RTCA - DO-160_Section 8.7.1 Robust Vibration Test Procedure-Fixed-Wing Aircraft Sinusoidal © Airbus SAS, 2014. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied. Airbus SAS Registered office: Société par actions simplifiée au capital de 2.704.375 Euros 1, rond-point Maurice Bellonte Page 2 / 5 RCS Toulouse 383 474 81 31700 Blagnac, France ATTESTATION OF AIRBUS TESTING QUALIFICATION Qualification reference: RP1431370 Ind. A We hereby declare the company: File followed by: DAVALOS Barbara BERTRANDT INGENIEURBUERO GMBH ARP-ID: 142398 Address: Lab in -> Kruemke 1 - Tappenbeck In ARP -> Blohmstr 10 Hamburg 38479 / 21079 Germany Qualified or Authorised to proceed for the following Tests processes until end of 2016: Test Standard(s) Test label Test category Qualif. Status ATP Expiration date Next PTP participation required Remark Other test - Specify in Remark Qualified Vibration RTCA - DO-160_Section 8.7.2 Robust Vibration Test Procedure-Fixed-Wing Aircraft Random Other test - Specify in Remark Qualified Vibration "(Program Specific Technical Notes)A350: V00RP0730936, V71RP0832860 and TN524.5071-05" Other test - Specify in Remark Qualified Operational Shocks and Crash Safety RTCA - DO-160_Section 7.2.1 Operational Shocks Other test - Specify in Remark Qualified Operational Shocks and Crash Safety RTCA - DO-160_Section 7.3.1 Crash Safety Test Procedure 1 (Impulse) Other test - Specify in Remark Qualified Operational Shocks and Crash Safety RTCA - DO-160_Section 7.2.2 Operation Shocks Alternate Test Procedure Modal analysis Qualified Other test - Specify in Remark Qualified Salt Fog - DO160 Plastics / Metall alloys Other test - Specify in Remark Qualified Fluid Susceptibility - DO160 Plastics / Metall alloys Other test - Specify in Remark Qualified Waterproofness - DO160 Plastics / Metall alloys © Airbus SAS, 2014. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied. Airbus SAS Registered office: Société par actions simplifiée au capital de 2.704.375 Euros 1, rond-point Maurice Bellonte Page 3 / 5 RCS Toulouse 383 474 81 31700 Blagnac, France ATTESTATION OF AIRBUS TESTING QUALIFICATION Qualification reference: RP1431370 Ind. A We hereby declare the company: File followed by: DAVALOS Barbara BERTRANDT INGENIEURBUERO GMBH ARP-ID: 142398 Address: Lab in -> Kruemke 1 - Tappenbeck In ARP -> Blohmstr 10 Hamburg 38479 / 21079 Germany Qualified or Authorised to proceed for the following Tests processes until end of 2016: Test Standard(s) Test label Test category Qualif. Status ATP Expiration date Next PTP participation required Remark Other test - Specify in Remark Qualified Low/High Survival Temp - DO160 Plastics / Metall alloys Other test - Specify in Remark Qualified Operational Low / High Temperature - DO160 Plastics / Metall alloys Other test - Specify in Remark Qualified Humidity - DO160 Plastics / Metall alloys Sine vibrations test Qualified Several metals and plastics Combined climatic and mechanic testing Qualified Shock test Qualified Several metals and plastics Random vibrations test Qualified Several metals and plastics Other test - Specify in Remark Qualified Temperature Variation - DO160 Plastics / Metall alloys Qualified Aluminium alloy Coated metal AITM 1-0012 Shear testing of metallic materials wrought products (AITM 3-0012) AITM 1-0023 Assessment of the influence of evaporated residues of aqueous cleaning agents on metallic parts 3 Qualified AITM 3-0012 Shear testing of metallic materials wrought products 2 Qualified © Airbus SAS, 2014. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied. Airbus SAS Registered office: Société par actions simplifiée au capital de 2.704.375 Euros 1, rond-point Maurice Bellonte Page 4 / 5 RCS Toulouse 383 474 81 31700 Blagnac, France ATTESTATION OF AIRBUS TESTING QUALIFICATION Qualification reference: RP1431370 Ind. A We hereby declare the company: File followed by: DAVALOS Barbara BERTRANDT INGENIEURBUERO GMBH ARP-ID: 142398 Address: Lab in -> Kruemke 1 - Tappenbeck In ARP -> Blohmstr 10 Hamburg 38479 / 21079 Germany Qualified or Authorised to proceed for the following Tests processes until end of 2016: Test Standard(s) Test label Test category Qualif. Status ATP Expiration date Next PTP participation required ASTM B117 Standard practice for operating salt spray (Fog) apparatus 2 Qualified ASTM B769 Shear testing of aluminium alloys 2 Qualified 2015 ASTM E8 Tension testing of metallic materials 2 Qualified 2015 * Next PTP participation required = TBD: You will be informed when next PTP will be launched. Remark: The Airbus Testing Qualification may be cancelled by Airbus in case of major incident(s) detected on one or several processes. Remark Aluminium alloy Aluminium alloy Barbara DAVALOS Procurement Operations Quality System - POLV Airbus Laboratories Qualification Manager © Airbus SAS, 2014. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied. Airbus SAS Registered office: Société par actions simplifiée au capital de 2.704.375 Euros 1, rond-point Maurice Bellonte Page 5 / 5 RCS Toulouse 383 474 81 31700 Blagnac, France
© Copyright 2024 ExpyDoc
