CNG Fuel System Parts Manual Four Cylinder Front End Load Refuse Roof Mount System 60 DGE: 20511000 75 DGE: 20508000 ENP-176 June, 2014 Four Cylinder FEL Roof Mount System Parts Manual Proprietary Statement The information provided within this manual is proprietary and confidential. All prior versions of this manual, including updates and revisions forwarded separately, are proprietary. The information provided by Agility Fuel Systems to its customers and clients is solely for the use of those customers and clients. No portion of this manual may be reproduced or distributed without express written consent of Agility Fuel Systems. Agility Fuel Systems reserves the right to utilize the intellectual property contained within this publication as content for any other publication produced by Agility Fuel Systems. Agility Fuel Systems gives express consent to our customers to utilize portions of this manual, or the manual in its entirety, for the purposes of providing their customers and clients with information pertaining to the Agility Fuel Systems liquefied natural gas (LNG) and compressed natural gas (CNG) fuel storage system as used on their vehicles with appropriate acknowledgement of copyright. It should be noted that the version of this manual dated 6/27/2014 replaces any prior version. Any information reproduced by our customers for their use, or that of their customers and clients, should be drawn from this manual. Service and support of this unit may be obtained by contacting Agility Fuel Systems. Notes 1. Contact Agility Fuel Systems Product Support if any of the following items are damaged a) Chassis panels, cabinets and cabinet hardware b) Internal frames and superstructures c) Hoses and tubing d) Wire harnesses e) Tanks 2. When contacting Product Support, please have the following information ready for efficient service: a) Unit serial number b) VIN c) Date of purchase or installation Revision -- Document History Description Approved By Initial Release YC Date 6/27/14 Agility Fuel Systems 1815 Carnegie Ave Santa Ana, CA 92705 USA Product Support +1-949-267-7745 [email protected] www.agilityfs.com ENP-176: Four Cylinder FEL Roof Mount System Parts Manual Rev. -- Approved: YC Page 2 of 5 Four Cylinder FEL Roof Mount System Parts Manual Figure 1: Four Cylinder FEL Refuse Roof Mount System - Outer View 60 DGE Roof Mount System 20511000 75 DGE Roof Mount System 20508000 WARNING If the vehicle has been in an accident, the cylinders and fuel system must be inspected by a qualified inspector. Table 1: Four Cylinder FEL Refuse Roof Mount System - Outer View ITEM QTY 1 2 3 4 5 6 7 8 9 10 11 1 4 4 6 2 1 1 1 1 1 1 PART NUMBER 60 DGE / 75 DGE 20501304 / 20508300 20404103 10702162 10702163 20501307 20501302 20511300 20501301 20501306 20501117 / 20508100 20501100 DESCRIPTION FRONT COVER COVER ATTACHMENT CORD PULL LATCH HINGE TOP DOOR REAR SIDE COVER OPPOSITE REAR COVER REAR SIDE COVER FRONT COVER SIDE SIDE BEAM NECK BEAM ENP-176: Four Cylinder FEL Roof Mount System Parts Manual Rev. -- Approved: YC Page 3 of 5 Four Cylinder FEL Roof Mount System Parts Manual Figure 2: Four Cylinder FEL Refuse Roof Mount System - PRD End 60 DGE Roof Mount System 20511000 75 DGE Roof Mount System 20508000 Table 2: Four Cylinder FEL Refuse Roof Mount System - PRD End ITEM 1 2 3 4 5 6 7 8 9 QTY 8 4 2 4 2 2 2 4 2 PART NUMBER 20100120 10210001 20511408 10300077 10240330 20511410 20511409 10702041 10702038 DESCRIPTION NECK BLOCK HALF - PRD END 90 ELBOW - MALE -06 JIC TO MALE 1/2-20 SAE PRD TUBE PRD, BOSS MOUNT, CNG 3/8-IN. EXPANDING MJIC TEE PRD TUBE PRD TUBE 1/2-IN. TUBE CLAMP COVER 1/2-IN. TUBE CLAMP ENP-176: Four Cylinder FEL Roof Mount System Parts Manual Rev. -- Approved: YC Page 4 of 5 Four Cylinder FEL Roof Mount System Parts Manual Figure 3: Four Cylinder FEL Refuse Roof Mount System – Valve End 60 DGE Roof Mount System 20511000 / 75 DGE Roof Mount System 20508000 Table 3: Four Cylinder FEL Refuse Roof Mount System – Valve End ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 QTY 8 4 1 2 3 1 1 1 2 1 2 1 2 1 1 1 1 2 2 2 2 PART NUMBER 20100119 10300102 10200012 20511420 10200215 20511411 20511413 20511414 10200266 20511415 10701608 10701708 20511419 20511422 10200112 20511417 10240118 10200062 20511423 20511409 10240330 DESCRIPTION NECK BLOCK HALF - VALVE END VALVE TUBE FITTING, REDUCING UNION, 1/2-IN. x 3/8-IN. PRD TUBE REDUCING UNION TEE, 1/2-IN. x 1/2-IN. x 3/8-IN. FILL TUBE FILL TUBE FILL TUBE 9/16-IN. HEX PLUG FILL TUBE TUBE CLAMP, HALF, 1/2-IN. TUBE CLAMP, TOP PLATE, 1/2-IN. PRD TUBE FILL TUBE TUBE FITTING, REDUCER, 3/8-IN. x 1/2-IN. TUBE OD FILL TUBE 3/8 MJIC x 3/8 MORB HIGH PRESSURE 3/8-IN. OD x 9/16-18 MALE PRD TUBE PRD TUBE 3/8-IN. EXPANDING MJIC TEE ENP-176: Four Cylinder FEL Roof Mount System Parts Manual Rev. -- Approved: YC Page 5 of 5
© Copyright 2024 ExpyDoc
