® Zerust AxxaClean™ HPW-100C Technology that Cleans And Prevents Corrosion p r o duc t i n f o r ma t i o n features Deactivates ionic contaminants Prevents flash corrosion Convenient concentrate Enhances RPs and coatings Prolongs VCI effectiveness benefits Reduces corrosion incidents Reduces need for inspection and rework Saves money & resources Comes with Zerust global onsite support Zerust® AxxaClean™ HPW-100C is a liquid, high-pressure wash additive used to prevent flash corrosion after cleaning processes. It provides powerful deactivation of ionic contaminants, such as highly corrosive chlorides and sulfates on metal surfaces. AxxaClean HPW-100 solution is a safe, non-foaming cleaner that can be applied by immersion, high-pressure or ultra high-pressure wash. The product is conveniently offered as a liquid concentrate and may be diluted with water per the application. Multipurpose Surface Cleaner and Passivator Typical applications include cleaning and surface passivation of metal surfaces contaminated by metalworking fluids, tap water sources or located near marine environments. Use Zerust Axxaclean HPW-100 on machinery, parts, and components or as an additive for high-pressure paint stripping. Directions for Use Dilute AxxaClean HPW-100C in deionized water. When using tap sources, pretreat water with Zerust AxxaVis™ PX-10-HRD. Product may be used as a final wash or as an additional rinse for freshly worked parts. After cleaning, dry thoroughly and place into corrosion inhibitor packaging and/or coatings for storage and shipping. A P P L I C A TION E X A M P L E S Zerust® AxxaClean™ HPW-100 is a versatile multi-use product that cleans and prepares surfaces for effective corrosion inhibitor protection. A P P L I C A TION T Y P E RECOVERY & RE-WORK A metal surface recently cleaned of rust and paint corrodes quickly in extreme environments. Add Zerust AxxaClean HPW100C to water used for cleaning to prevent flash corrosion. Large metal components are cleaned with a solution of AxxaClean HPW-100 after metal processing to prevent flash corrosion. Sprayed liquid is collected, filtered and reused. OR D ERING INFOR M A TION zerust ® Axxaclean ™ HPW-100 product information n Availability/part number Zerust Axxaclean HPW-100 Test Results Part Number: 350-F-00007 5 gallon pails, 55 gallon drums n Shelf life & Handling Shelf life of 2 years when stored in original sealed container, out of direct sunlight and below 122°F (50°C). n Test Conditions Polished 1010 steel panels treated in 3.5% salt solution for 5 minutes, dried for 24 hours, treated in an agitated wash of 1.5% concentrate solution for 1 minute, and then placed in a humid 120oF (49oC) environment. Treated Panel Time = 0 Days Treated Panel Time = 2 Months Untreated Control Time = 2 Months D.I. Washed Time = 2 Months Metal Types Ferrous metal protection n disposal Waste must be collected. Dispose of in accordance with local, national and international regulations. QUESTIONS? Contact Customer Service: Call: +1 (763) 225-6600 Email: [email protected] Dosage Instructions Application Method* Dosage Percentage by Volume Immersion 1-5% Low Pressure (up to 300 psi) 1-2% High Pressure (up to 3000 psi) 1-2% Ultra-High Pressure (>3000 psi) 1-2% *For water with a hardness above 100 ppm, pre-treat with Zerust AxxaVis™ PX-10-HRD. OT H ER P RO D U C T S A V A I L A B L E ICT®500 Series: VCI Packaging Films Our most widely used series of products. A variety of VCI films offer short or long-term corrosion protection for parts and equipment during storage or shipment. ICT 600 Series AxxaClean™ Rust Removers Safe, easy-to-use, and fast-acting rust and tarnish removers. A product of: N o r t h e r n Te c h n o l o g i e s International Corporation 4201 Woodland Road P.O. Box 69 Circle Pines, MN 55014 PH: +1 (763) 225-6600 FAX: +1 (763) 225-6645 EMAIL: [email protected] WEB: www.zerust.com ICT 700 Series: Axxanol™ and Axxatec™ Liquid Corrosion Preventatives Corrosion inhibitor additives and coatings for protecting parts in-between production processes, during storage or for added protection to the ICT®500 VCI film series of products during ocean shipments. Warranty and Disclaimer Information: We guarantee our products conform to documented quality specifications. Product information subject to change without notice. We make no warranty of any kind expressed or implied as to the effects of use (including, but not limited to, damage or injury). For full warranty and disclaimer information visit, www.zerust.com/warranty. ©2014 Northern Technologies International Corporation (NTIC). All Rights Reserved. NTIC is the owner of the following trademarks: ActivPak®, COR-SCI®, Cor-Tab®, Flange Saver®, ICT®, NTI®, Plastabs®, Z-CIS®, Zerion®, ZERUST®, The ZERUST People®, and the Color “Yellow”. ABRIGO®, EXCOR®, UNICO®, and VALENO® are registered trademarks of EXCOR GmbH, a Joint Venture Partner of NTIC. Rev C