Download - Ace Controls International

Welcome to...
Looking for a gas spring
replacement...
For over 40 years ACE has been successfully
manufacturing and supplying a wide range of
motion control products.
Industrial gas springs have always been a key part of the ACE product range
and today some 28 standard models with body diameters of 8 to 70mm are
offered, push and pull type, black coated steel and stainless steel.
However, despite having this successful range, ACE is always being asked
for the urgent replacement of gas springs to match other widely used
products from Stabilus, Suspa and many others.
Therefore, to meet this growing and ongoing demand for gas spring
equivalents from stock, ACE has introduced the new replACE range of
force adjustable gas springs.
Developed primarily to match the stroke, end fittings and installation length
of the most widely used Stabilus gas springs, the three RGS models offered
can provide equivalents for around 1000 standard Lift-O-Mat 6-15, 8-19,
10-22 and 14-28 products.
Product data sheets are shown here and a replACE/Stabilus cross reference
guide can be found at www.replacegassprings.co.uk
...Let replACE do it from stock
Ace Controls International
Unit 404, Easter Park, Haydock Lane Haydock WA11 9TH
Tel: 01942 727440 Fax: 01942 717273
Email: [email protected] Web: www.ace-controls.co.uk
Equivalent for Stabilus 6–15
Extension forces 50N to 400N
ø6
EYE THICKNESS AF
3
ø15
ACE
Eye
ET
Eye
ET
ø6.1
STROKE
Ball Joint
WX22
Ball
ø10
L±2mm Extended
Dimensions
Type
12
Ball Joint
CX27
M8
Stroke
mm
L
Extended
RGS-15-20
20
67
RGS-15-40
40
107
RGS-15-60
60
147
RGS-15-80
80
187
DE-GAS-5 Tool
(only needed if force is unknown)
RGS-15-100
100
227
RGS-15-120
120
267
RGS-15-150
150
327
Part Numbers
Technical Information
replACE part number examples:
On request: Alternative end fittings, wiper
RGS-15-60-ET-ET-V-400N
Mounting: We recommend mounting with piston rod downwards to take
advantage of the built-in end position damping
(Equivalent to Lift-O-Mat 094315)
RGS-15-100-WX22-CX27-V-50N
(Equivalent to Lift-O-Mat 082953)
Note: RGS models are designed to closely match the
stroke, end fittings and installation length of standard
Lift-O-Mat gas springs. To aid product selection use
cross reference guide at www.replacegassprings.co.uk
Material: Body-Black coated steel. Piston rod-With wear-resistant coating.
End fittings-Zinc plated steel
Progression (Force increased when fully compressed): Approx 27%
Dimensions: All in millimetres (mm)
Equivalent for Stabilus 8–19 & 10–22
Extension forces 100N to 1200N
ø23
ø10
EYE THICKNESS AF
5
ACE
Eye
AX24
Eye
AX24
ø8.1
STROKE
12
Ball Joint
WG18
Ball
ø10
L±2mm Extended
Dimensions
M8
Type
RGS-23-60
RGS-23-80
RGS-23-100
RGS-23-120
RGS-23-140
RGS-23-150
RGS-23-160
RGS-23-180
RGS-23-200
RGS-23-220
RGS-23-250
RGS-23-300
RGS-23-350
RGS-23-400
Stroke
mm
L
Extended
55
75
95
115
135
145
155
175
195
215
245
295
345
395
156
196
236
276
316
336
356
396
436
476
536
636
736
836
Ball Joint
CX33
DE-GAS-8 Tool
(only needed if force is unknown)
Part Numbers
Technical Information
replACE part number examples:
On request: Alternative end fittings, wiper
RGS-23-300-AX24-AX24-V-500N
(Equivalent to Lift-O-Mat 095095)
Mounting: We recommend mounting with piston rod downwards to take
advantage of the built-in end position damping
RGS-23-100-WG18-CX33-V-500N
Material: Body-Black coated steel. Piston rod-With wear-resistant coating.
End fittings-Zinc plated steel
(Equivalent to Lift-O-Mat 083380)
Note: RGS models are designed to closely match the
stroke, end fittings and installation length of standard
Lift-O-Mat gas springs. To aid product selection use cross
reference guide at www.replacegassprings.co.uk
Progression (Force increased when fully compressed): Approx 35–64%
Dimensions: All in millimetres (mm)
Equivalent for Stabilus 14–28
Extension forces 150N to 2500N
ø28
ø14
EYE THICKNESS AF
18
EYE THICKNESS AF
Eye
AX18
12
ACE
Eye
AX21
ø10.2
STROKE
Ball Joint
C10
Ball
ø16
L±2mm Extended
Dimensions
Type
20
Ball Joint
C10
M10
Stroke
mm
L
Extended
RGS-28-100
100
262
RGS-28-150
150
362
RGS-28-200
200
462
RGS-28-250
250
562
RGS-28-300
300
662
RGS-28-350
350
762
RGS-28-400
400
862
RGS-28-500
500
962
Part Numbers
replACE part number examples:
DE-GAS-10 Tool
(only needed if force is unknown)
Technical Information
On request: Alternative end fittings, wiper
Mounting: In any position
RGS-28-300-AX21-AX18-V-1500N
(Equivalent to Lift-O-Mat 085669)
RGS-28-100-C10-C10-V-1500N
(Equivalent to Lift-O-Mat 085804)
Note: RGS models are designed to closely match the
stroke, end fittings and installation length of standard
Lift-O-Mat gas springs. To aid product selection use
cross reference guide at www.replacegassprings.co.uk
Advice: We recommend mounting with piston rod downwards to take
advantage of the built-in end position damping
Material: Body-Black coated steel. Piston rod-With wear-resistant coating.
End fittings-Zinc plated steel
Progression (Force increased when fully compressed): Approx 60-95%
Dimensions: All in millimetres (mm)
General Gas Spring Replacement Enquiry Form
* ROD DIAMETER
EYE THICKNESS AF
* BODY DIAMETER
Eye
L
D
* EXTENDED CENTRE TO
CENTRE OF END FITTINGS
* STROKE
HOLE
DIAMETER
Step 1: Enter *dimensions (mm) in the 4 boxes above
L
THREAD
LENGTH
D
THREAD
DIAMETER
L
SLOT SIZE
BALL
SOCKET
DIAMETER
Step 2: Circle the type of end fitting & enter dimensions into boxes
D
Rod End Fitting Type: Eye / Angle Ball Joint / Clevis Fork / Ball Socket
Clevis Fork
Dimension ‘D’
D
PIN
DIAMETER
D
Angle Ball Joint
Dimension ‘L’
Body End Fitting Type: Eye / Angle Ball Joint / Clevis Fork / Ball Socket
L
L
D
Ball Socket
Dimension ‘D’
Dimension ‘L’
Note: If threads are not metric coarse please give full spec. ie UNC, UNF etc.
Step 3: Answer the questions below
Customer Details
Do you require an adjustable force gas spring: Yes / No
Company Name:
(Note: If no, you must give a force below)
Contact:
Required force of gas spring if known:
Address:
Part number of existing gas spring if known:
Stainless steel: Yes / No
Tel No:
Quantity required:
Fax No:
Note: If you require a locking gas spring or traction gas spring
(pull type rod retracted) please telephone us on 01942 727440.
E-mail:
Please copy, complete and return to Ace.
D

Download Report