European Coatings
Conference
8 – 9 December 2014, Düsseldorf | Germany
Biobased materials for industrial coatings
PLUS!
• Introductory short course
• Market overview
• Technical workshops
Source: © beeboys – fotolia.com
www.european-coatings.com/biobased
Biodiversity in every coating detail
Biobased materials for industrial coatings
8 – 9 December 2014
Modern coatings must continue to meet the basic requirements of aesthetics and resistance to numerous external
influences. But, as reserves of fossil fuels decline, how might raw material shortages be avoided in the future? The
first steps to incorporating renewable elements into coatings have already been taken. Renowned experts will try to
provide answers and discuss current issues to demonstrate the extent to which advances in renewables are impacting on modern coatings and just how sustainable their future will be.
Discuss the latest developments and trends
Source: Davidus – fotolia.com
Attendees have the opportunity to discuss topics driving the market of protective coatings on a high technical level
during technical workshops moderated by speakers of the conference.
Short course
Market overview
Included in the conference is a 2-hour short course on
the basics of protective coatings.Lecturer will be Dr Peter Plagemann, Fraunhofer Institute for Manufacturing
Technology and Advanced Materials (IFAM) in Bremen,
Germany.
In his market overview, Rob Outramof IRL, UK, will discuss protective coating market metrics, growth regions
and countries, as well as key trends and opportunities
Conference schedule
CONFERENCE DAY I
Monday, 8 December 2014
09.00 h Conference registration
09.50 h Welcome address and conference introduction
10.00 h Short course: Basics of biobased coatings
Dr Claudia Schirp, WKI Fraunhofer, Germany
12.00 h Lunch
13.30 h Technical workshops
14.45 h Coffee Break
15.00 h Presentation Technical Workshop results
15.30 h Bio-solvents as an alternative to traditional solvents in general and particular regarding
the VOC directives 2004/42/EU and 1999/13/EU
Anton Kruf, Galactic, Belgium
16.00 h Lactide: Enhancing resin efficiency – improving coating performance
Armin Michel, Corbion Purac, The Netherlands
16.30 h Coffee Break
17.00 h Biobased barrier coatings for food packaging applications
Jari Vartiainen, VTT, Finland
18.00 h End of day I
19.00 h Networking dinner
(Registration necessary | Meeting point: 18.30 h at the hotel lobby)
Source: Pefkos Victor Burnside – fotolia.com
17.00 h Bio-based solutions for high-performance coatings
Erwin Honcoop, Croda, The Netherlands
Conference schedule
CONFERENCE DAY II
Tuesday, 9 December 2014
08.00 h Meet the speakers
0 9.00 h Highlighting experimental formulations of Biosuccinium- based alkyd resins and coatings
Anouk Luykx, Reverdia, The Netherlands
09.30 h Comparative study of tribological properties of thermal barrier coatings on mild
steel and stainless steel substrates
Mian Muhammad Farooq, University of the Punjab, Pakistan
10.00 h An innovative approach to produce eco-friendly resins for powder coating
Martino Colonnaa, University of Bologna, Italy
10.30 h Coffee Break
11.00 h Audience Poll
11.30 h Computer aided corrosion prevention
Robrecht Belis, Elsyca NV, Belgium
11.30 h Beyond Biobased
Ger Duyndam, Ursa Paint, The Netherlands
12.00 h Market research and database on bio-based polymers in the world
Florence Aeschelmann, Nova-Institut, Germany
12.30 h Lunch
14.00 h Cardenol investigations for epoxy coatings
Prasad Nadkarni, Paladin-India
14.30 h Biotechnological plattform for the production of industrial amines as crosslinkers
Philip Engel, Evonik Industries, Creavis, Germany
15.00 h End of conference
Source: Evonik Industries
13.30 h Novel Biobased Polymers for Coating Applications
Bret Chisholm, North Dakota State University, USA
Five reasons to attend:
• High value - more than a dozen presentations from industry,
institutes and universities will give you a concise overview
of latest advances in coatings technology.
• Solid foundation – every conference begins with an
introductory short course. Brush-up your know-how
before the conference starts.
• Know your market – get an exclusive overview of
market data by internationally known experts.
• Network – strengthen and extend your personal network,
meet your peers and clients in an informal atmosphere.
• Contribute – take part in the technical workshops
to discuss specific topics with other experts.
Meet the speakers
In the morning of the second conference day, selected speakers will
be available for one-on-one meetings to discuss individual issues.
Schedules and further information will be available on-site at the
conference counter.
Who should attend
The European Coatings Conferences are designed for coating
engineers, research managers and scientists active in the field
of coatings technology. Material, paint and polymer chemists
as well as formulators, coatings manufacturers and raw material
supplier will find in these conferences an excellent platform for
up-dating knowledge and exchanging ideas with international
coatings experts.
Accomodation and conference venue
Accommodation
Conference Venue is the Hotel Nikko Düsseldorf. The hotel is conveniently located
within a 10-minutes drive from Dusseldorf Airport by train or car and a 2 minute
walk from the main train station. Hotel accommodation is not included in the
registration fee but can be made directly with the hotel. Take advantage of our
special room rate of 139,- Euro per night incl. breakfast. You will receive a hotel
reservation form along with other conference information after your registration.
Nikko Hotel Düsseldorf
Immermannstrasse 41
40210 Düsseldorf (Germany)
T +49 211 8340
F +49 211 161216
[email protected]
www.nikko-hotel.de
Cancellation conditions
Cancellation policies are the following: Fees will be refunded in full if notice of cancellation is received up
to 4 weeks before the conference. 50% of the fee will be refunded if cancellation is received later, but no
later than two weeks before the conference. Delegates who cancel less than two weeks before the conference
or fail to attend without notifying the organiser will be liable for the whole conference fee. In all cases postmark shall apply. Substitutions of delegates may be made at any time. Cancellations and changes should be
made in writing and will be confirmed by the organiser. Any fee refunded will be paid after the conference.
The organiser reserves the right to change the programme content or to cancel the event due to important reasons.
Cancellation fees of third parties that may appear in this context will not be reimbursed.
Please note
Photographs and videos of delegates will be taken during the conference and may be used for promotional purposes.
Vincentz Network produces a list of delegates for each event which may include the following information: company
name, address (street, zip code, city), name and job function of delegate. This list of delegates will be made available for all conference delegates, speakers and possible sponsors of the event, who may use them for promotional
purposes. Objection against publication and circulation of this data may be made at any time until 3 weeks prior to
the event and has to be made in writing to the organiser.
Your key contact for
Protective coatings:
Moritz Schürmeyer
T +49 511 9910-278
[email protected]
Registration | Terms & Conditions
Fax +49 511 9910-279 I www.european-coatings.com/ecc
Biobased materials for industrial coatings
Conference
 Raw materials supplier
1500,-€
 Coatings manufacturer
650,-€
 University member
650,-€
 Student
0,-€
Networking Dinner
 Networking Dinner
0,-€
Spouse Participation
 Spouse Participation
95,-€
Live Stream
 Full day stream
 Single day stream 8 December 2014
 Single day stream 9 December 2014
600 €
400 €
400 €
Your contact information
Name
First Name
Titel
CompanyDepartment
ZIP Code
Street
CityCountry
Email (Please note that the invoice and registration confirmation will be send to you by email.)
Please charge my credit card
 AMEX
Creditcard Number
 Mastercard
 VISA
Expiry date
With my signature, I accept all conditions as written at www.european-coatings.com/Terms-and-Conditions
DateSignature
Name of cardholder