Catalogue - Tsurumi Pump

UT/UTZ
Compact Type Cast Iron Pumps
with No Unnecessary Frills
Economic Model
The UT/UTZ-series is economic model of
the U-series, vortex pump. It is designed
for a wide range of applications.
Automatic Operation
The pump employs a float switch for
automatic operation to prevent dry
running and lower power consumption.
Large Diameter Passage
The pump has a large diameter passage
that makes it ideal for liquid containing
various solid matters.
Applications
• Transferring wastewater between
the tanks at small-scale treatment
facility
• Draining sewage from factory,
residence, hotel, restaurant, etc.
• Pumping rainwater and springwater
at a place where solid matters are
likely to run into the water
Printed on recycled paper with soy ink –
Evidence of our commitment to the environment
Amenities from Technology
for People and the Earth
C100%
Submersible Sewage Pumps
Vortex UT/UTZ
■ Major Components & Specifications
Anti-wicking Cable Entry
Discharge Bore
mm 40
50
Sewage, Wastewater, and
Liquid carrying Waste and
Pumping Type of Fluid
Solid Matters
Fluid
Fluid Temperature
0 to 40℃
Impeller
Vortex
Double Mechanical Seal
Structure Shaft Seal (with Oil Lifter)
Bearing
Double-shielded Ball Bearing
Pump
Glass-fiber Reinforced Resin
Impeller
Materials Casing
Gray Cast Iron
Shaft Seal SiC
Dry Type Submersible
Type, Pole
Induction Motor, 2-pole
Insulation
Class E
Single-phase (suffix "S")
Phase
Three-phase
Capacitor Run (single-phase only)
Starting Method
Direct on Line
Motor
Circle Thermal Protector
Protection Device
Miniature Thermal Protector
(Built-in)
(0.25 and 0.4kW of single-phase)
Lubricant
Turbine Oil (ISO VG32)
Frame
Gray Cast Iron
Materials Shaft
403 Stainless Steel
Cable
PVC
Discharge Connection
Screwed Flange
An anti-wicking block is provided at the cable entry section of the motor chamber.
Even if the cable jacket becomes damaged or the tip of the cable is accidentally
immersed in water, this device prevents water from traveling into the motor chamber through capillary action.
Motor Protector
A built-in thermal motor protection device reacts to the heat caused by overcurrent or
run-dry conditions. It not only cuts off the motor circuit automatically but also resets by
itself. When the motor cools down to a safe operating temperature, the motor restarts.
Dual Inside Mechanical Seal
The dual inside mechanical seal (dual face mechanical seal located in an oil bath)
is incorporated in all pumps. As both upper and lower sealing faces are lubricated
by the oil only, it ensures a longer life of the product and a stable sealing effect.
4
0
0.1
2.
4
T2
5(
S ) .4S
2.2
2
U
UT
0.2
Capacity
8
50
6
UT
40
UT
4
2
0.3
(m 3/min)
0
0.4
L
2.
2.
25
4(
S)
(S
)
H
Total Head (m)
UT
50
(S
)
)
S
5(
40
50
75
.7
6
2.
10
T2
8
60
Hz
12
U
UT
■ Dimensions
50
50
S.S. 3600min–1
14
Total Head (m)
50
Hz
12
0
Standard and Automatic models have the identical performance.
S.S. 3000min–1
14
oil
Guide Vane
Start
Level
Range
90
■ Performance Curves
Shaft
0
0.1
0.2
0.3
Capacity (m 3/min)
0.4
＊The figure in parentheses is for the 50UTZ2.75S.
■ Model Selection
mm
40
Model
FreeStanding
Standard
Automatic
40UT2.25S
40UTZ2.25S
Guide Rail
Fitting
50
50UT2.4S
50UTZ2.4S
(TOK4-A)
50UT2.75S
50UTZ2.75S
Discharge
Bore
40
50
50
•
•
50
40UT2.25
50UT2.4
50UT2.75
(TOK4-A)
(TOK4-A)
(TOK4-A)
(TOK4-A)
(TOK4-A)
Motor
Output
Phase
Starting
Method
0.25
Single
Capacitor Run
mm
35
0.4
Single
Capacitor Run
35
0.75
Single
Capacitor Run
kW
0.25
0.4
0.75
Three
Three
Three
Max. 400 (455)
The Oil Lifter is a lubricating
device that forcibly lubricates oil
the mechanical seal. It further
stabilizes the functions of the
mechanical seal and extends
the life expectancy of the seal
oil
and also the inspection term.
10
Mechanical
Seal
Oil Lifter
Shaft
Stop
Min.
Level
140 (195) 40 Range
Oil Lifter (Patented)
293
Min. Required Space
■ Features
D.O.L.
D.O.L.
D.O.L.
Solids
Passage
Dimensions
LxH
35
239 x 350
239 x 350
35
35
35
mm
242 x 350
242 x 350
242 x 406
242 x 387
Dry
Weight
kg
Cable
Length
13.5
m
5
13.5
5
13
13
16.5
15.5
5
5
5
5
For use in combination with the guide rail fitting, order the pump and the TOK4-A guide rail fitting individually.
Weights excluding cable
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer
CAT. IA125-C Printed in Japan
NZ-D-I-Q

Download Report