PRO3 Firmware G2.3.2 rel-1 Public Beta (23 April 2014) This release has been issued as a beta release. It can be used by the public under the understanding that it is a beta release and not fully release final software New Features • Not applicable – bug fix only. Fixed Issues • Marmaserver builds with incorrect PRODUCT - Corrected issue with Mixtender connecting Pro 3, 6 & 9 • Flash image won’t boot Known Issues • It is possible that on some occasions, some DL451 units may fail to start-up correctly • If clearing CBMA during an upgrade on Pro 1 and Pro 2 the console will launch with a DL251 automatically configured on ports 1, 2 & 3 • If an Aux Send or Mtx forms part of a VCA and that VCA is expanded, a partially-drawn Pan control will appear on those Aux / Mtx channels • Transient accent not updated with presets • Names given to DL15x units on the patching page will not be displayed on the unit LCD • DL15x units require an ID between 1 and 4 during the upgrade process (1 to 18 available during normal usage) • Starting the remote (iPad) server on the console can cause audio to freeze for up to 30 seconds. The audio will always recover. • Depending on the number of configuration of paths in a VCA or POP, one (but not both) of the surface < or > scroll buttons can sometimes fail to operate • DL431 – snake data set to both A & B outputs (irrespective of setting mode) Update Procedure • This upgrade may be performed using the system updater as usual • N.B Do not attempt to update DL15x directly from a console running G2.2 or earlier • Further steps available in pdf console update document. music-group.com 1 midasconsoles.com G2.3.1 rel-40 (03 March 2014) New Features • Not applicable – bug fix only Fixed Issues • DSP audio ring errors AME, Link errors and Deskew issue on Pro 3 without redundant DSP • DL451 app dies resulting in loss of control – appears as generic AES50 • Voltage logs too excessive – can cause slowdown of GUI • DL451 crashes if ID is changed consecutively several times Known Issues • When updating the XL8 it is recommended that you disconnect the Y router on the initial update cycle. Update the Y router separately on a second upgrade pass after power cycling the system • It is recommended that users backup all shows and preset files prior to upgrading their console • Intermittent diagnostics issue where by some DSPs on the stand-by network can display a false negative red display • If an Aux Send or Mtx forms part of a VCA and that VCA is expanded, a partially-drawn Pan control will appear on those Aux / Mtx channels • Transient accent not updated with presets • Names given to DL15x units on the patching page will not be displayed on the unit LCD • DL15x units require an ID between 1 and 4 during the upgrade process (1 to 18 available during normal usage) • Starting the remote (iPad) server on the console can cause audio to freeze for up to 30 seconds. The audio will always recover • Depending on the number of configuration of paths in a VCA or POP, one (but not both) of the surface < or > scroll buttons can sometimes fail to operate Update Procedure • This upgrade may be performed using the system updater as usual • N.B Do not attempt to update DL15x directly from a console running G2.2 or earlier • Further steps available in pdf console update document © 2014 MUSIC Group IP Ltd. All rights reserved. All information in this document is subject to change without any further notice. 000-00000-00000 music-group.com 2 midasconsoles.com