Polycom RSS 4000 / RealPresence Capture

INTEGRATION GUIDE
May 2014 | 3725-75304-001 Rev B
Polycom® RSS 4000 / RealPresence® Capture Server 1.6
and RealPresence® Media Manager 6.6
Polycom, Inc.
0
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
Copyright ©2014, Polycom, Inc. All rights reserved. No part of this document may be reproduced, translated into
another language or format, or transmitted in any form or by any means, electronic or mechanical, for any purpose,
without the express written permission of Polycom, Inc.
6001 America Center Drive
San Jose, CA 95002
USA
Trademarks
Polycom®, the Polycom logo and the names and marks associated with Polycom products are trademarks and/or
service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other
countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or
transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express
written permission of Polycom.
End User License Agreement
By installing, copying, or otherwise using this product, you acknowledge that you have read, understand and agree to
be bound by the terms and conditions of the End User License Agreement for this product.
Patent Information
The accompanying product may be protected by one or more U.S. and foreign patents and/or pending patent
applications held by Polycom, Inc.
Open Source Software Used in this Product
This product may contain open source software. You may receive the open source software from Polycom up to
three (3) years after the distribution date of the applicable product or software at a charge not greater than the
cost to Polycom of shipping or distributing the software to you. To receive software information, as well as the
open source software code used in this product, contact Polycom by email at [email protected].
Disclaimer
While Polycom uses reasonable efforts to include accurate and up-to-date information in this document, Polycom
makes no warranties or representations as to its accuracy. Polycom assumes no liability or responsibility for any
typographical or other errors or omissions in the content of this document.
Limitation of Liability
Polycom and/or its respective suppliers make no representations about the suitability of the information contained in
this document for any purpose. Information is provided “as is” without warranty of any kind and is subject to change
without notice. The entire risk arising out of its use remains with the recipient. In no event shall Polycom and/or its
respective suppliers be liable for any direct, consequential, incidental, special, punitive or other damages whatsoever
(including without limitation, damages for loss of business profits, business interruption, or loss of business
information), even if Polycom has been advised of the possibility of such damages.
Customer Feedback
We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and
comments to [email protected].
Visit the Polycom Support Center for End User License Agreements, software downloads, product documents,
product licenses, troubleshooting tips, service requests, and more.
Polycom, Inc.
1
Contents
About This Guide ....................................................................................... 3
Who Should Read This Guide?................................................................................ 3
Information Elements ............................................................................................... 3
Typographic Conventions ........................................................................................ 4
Get Started .................................................................................................. 5
Administrator Accounts ............................................................................ 6
Create a RealPresence Media Manager Administrator Account ........................... 6
Add the Administrator User to an Admin Group .................................................... 7
Create an Administrative Account on RealPresence Media.................................. 8
Templates ................................................................................................. 11
Recording Template ............................................................................................... 11
Transcoding Template ............................................................................................ 12
VRR Template.......................................................................................................... 14
Content Creation Profiles ........................................................................ 16
Create Default Content Creation Profile................................................................ 16
Create an Event ....................................................................................................... 18
RealPresence Capture Server Content Source Profile ........................................ 20
External Media Servers............................................................................ 23
Enable IIS Authorization Setting ............................................................................ 23
Create Live Publishing Points on the IIS Server .................................................. 24
Start Live Publishing Points on the IIS Server ..................................................... 28
Create External Media Server ................................................................................ 29
Reset the IIS Server ................................................................................................ 31
Get Help .................................................................................................... 33
Polycom and Partner Resources ........................................................................... 33
The Polycom Community ....................................................................................... 33
Polycom, Inc.
2
About This Guide
This Polycom® Polycom RSS 4000 / RealPresence® Capture Server 1.6 and RealPresence® Media
Manager 6.6 Integration Guide provides instructions for integrating the Polycom RSS 4000 and
RealPresence Capture Server appliances with RealPresence Media Manager. For information on
administering RealPresence Media Manager, see the Polycom® RealPresence® Media Manager
Administrator’s Guide.
Who Should Read This Guide?
System administrators should read this guide to learn how to integrate Polycom RSS 4000 and
RealPresence Capture Server with RealPresence Media Manager. This guide describes administrationlevel tasks and is not intended for end users.
Before reading this guide, you should be proficient with the following:
 Microsoft Windows Server 2012 and 2008 R2
 Microsoft SQL Server 2012 and 2008 R2
 Microsoft Internet Information Services (IIS)
 Microsoft Windows Media Services (WMS)
Information Elements
This guide may include any of the following icons to alert you to important information.
Icons Used in this Guide
Name
Icon
Description
Note
The Note icon highlights information of interest or important information needed
to be successful in accomplishing a procedure or to understand a concept.
Administrator Tip
The Administrator Tip icon highlights techniques, shortcuts, or productivity
related tips.
Caution
The Caution icon highlights information you need to know to avoid a hazard that
could potentially impact device performance, application functionality, or
successful feature configuration.
Warning
The Warning icon highlights an action you must perform (or avoid) to prevent
issues that may cause you to lose information or your configuration setup,
and/or affect phone or network performance.
Web Info
The Web Info icon highlights supplementary information available online such
as documents or downloads on support.polycom.com or other locations.
Polycom, Inc.
3
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
Name
Icon
Description
Timesaver
The Timesaver icon highlights a faster or alternative method for accomplishing
a method or operation.
Power Tip
The Power Tip icon highlights faster, alternative procedures for advanced
administrators already familiar with the techniques being discussed.
Troubleshooting
The Troubleshooting icon highlights information that may help you solve a
relevant problem or to refer you to other relevant troubleshooting resources.
Settings
The Settings icon highlights settings you may need to choose for a specific
behavior, to enable a specific feature, or to access customization options.
Typographic Conventions
A few typographic conventions, listed next, are used in this guide to distinguish types of in-text
information.
Typographic Conventions
Convention
Description
Bold
Highlights interface items such as menus, menu selections, window and dialog
names, soft keys, file names, and directory names when they are involved in a
procedure or user action. Also used to highlight text to be entered or typed.
Italics
Used to emphasize text, to show example values or inputs (in this form:
<example>), and to show titles of reference documents available from the Polycom
Support Web site and other reference sites.
Blue Text
Used for cross references to other sections within this document and for hyperlinks
to external sites and documents.
Courier
Used for code fragments and parameter names.
Polycom, Inc.
4
Get Started
You can integrate RealPresence Media Manager version 6.6 software with the Polycom RSS 4000 and
RealPresence Capture Server 1.6 appliances. The Polycom RSS 4000 and RealPresence Capture
Server appliances are network-based video conferencing solutions that enable live streaming, recording,
and archiving of video conference calls. Integrate your organizations Polycom RSS 4000 or
RealPresence Capture Server solutions to leverage RealPresence Media Manager software’s video
content management capabilities. The Polycom RSS 4000 and RealPresence Capture Server integration
enables you to manage video conference calls and distribute them through the RealPresence Media
Manager portal.
Configure the RealPresence Media Manager software in the Admin Tool to import Polycom RSS 4000
and RealPresence Capture Server live or archived calls, and then publish them to a RealPresence Media
Manager portal or send them to metadata providers for processing.
To complete this integration, you need the following:
● RealPresence Media Manager version 6.6 software installed, licensed, and connected to your
organization’s network
● Polycom RSS 4000 version 6.0 or later or RealPresence Capture Server version 1.6 or later
installed, licensed, and connected to your organization’s network
● Administrator access to both the RealPresence Media Manager software and Admin Tool
● Administrator access to the Polycom RSS 4000 / RealPresence Capture Server
● DNS assigned to the RealPresence Media Manager instance
● IP address, submask, and gateway of the RealPresence Capture Server and RealPresence Media
Manager instances
● FQDN of both the RealPresence Media Manager and RealPresence Capture Server
● Numbers and names of your organization’s Virtual Recording Rooms (VRR)
● The date and time on the RealPresence Media Manager server and Polycom RSS
4000/RealPresence Capture Server must be synchronized.
Caution: Integrating Polycom RSS 4000 and RealPresence Capture Server During
Upgrades to RealPresence Media Manager version 6.6
If you are upgrading from RealPresence Media Manager 6.5 software to version 6.6, and were
using virtual directories in your version 6.5 environment, you need set up new publishing
points. RealPresence Media Manager 6.6 software does not support virtual directories and will
delete them during the upgrade process.
Polycom, Inc.
5
Administrator Accounts
The first step to integrating RealPresence Media Manager with Polycom RSS 4000 or RealPresence
Capture Server is to set up administrator accounts on all devices.
Create a RealPresence Media Manager
Administrator Account
The first step is to log in to your Polycom RSS 4000 or RealPresence Capture Server and create a
RealPresence Media Manager Administrator user.
To create a RealPresence Media Manager Administrator user:
1 On a networked PC, open a browser and enter the IP address of the Polycom RSS 4000 or
RealPresence Capture Server using the format http://<ipaddress> or http://fqdn. For example,
enter http:172.22.123.56 or enter http://NPIRSS.polycom.com
2 Select Admin Login (shown next).
3 Enter the administrator user name and password. The default user name is admin and the default
password is Polycom123.
4 On the left pane, select User > Users, then click Add.
5 Enter the User ID, Full Name, and Password of your choice. Any name can be used to label the
Media Manager administrator.
Polycom, Inc.
6
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
Note: Password Requirements
The password must meet the password requirements, which is a capital letter, 9 characters,
and at least 1 number or a combination.
6 Select Administrator in the Role list (shown next) and enter a description (optional).
7 Click OK. The User will appear in the list of users, shown next.
Note: Changing Your Password
If you need to change the password, select Change Password located on the left toolbar.
Add the Administrator User to an Admin Group
Next, add the administrator user you created to an Admin Group on the Polycom RSS 4000 or
RealPresence Capture Server.
To add the administrator user to a group:
1 In the left pane, select User > Groups.
2 Select the Admins group and click Edit (shown below).
Polycom, Inc.
7
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
3 In the top tabs, select Group Members.
4 Select the PRMM_Admin user from the top list and then click Add. PRMM_Admin is added to the
group. Verify both the admin and PRMM_Admins are in the Group Members list as shown below.
5 Click OK.
Admin Tip: Number of Admin Users
Make sure there are at least two admin users in the Admin group, including the admin and the
PRMM_Admin
Create an Administrative Account on
RealPresence Media
Once you have created the administrator accounts on Polycom RSS 4000 or RealPresence Capture
Server, you need to create the same administrator account on RealPresence Media Manager.
To create an administrator account on RealPresence Media Manager:
1 Remote desktop into RealPresence Media Manager using the IP address of the RealPresence
Media Manager.
2 Enter the user name and password using the default credentials and click Connect.
 User name: PRMMAPPLIANCE\Administrator
Polycom, Inc.
8
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 Password: Polycom789
3 On the screen that appears, search for create an account. The server will automatically search for
the account creation program.
4 Click Settings then click Create an Account.
5 On the next window, click Add a user account.
6 On the Add a user screen, enter the same user name and password that you used as the
RealPresence Media Manager administrator on RSS4000 or RealPresence Capture Server. Click
Next and then click Finish.
7 On the Change an Account screen, select the account you just created and click Change the
account type.
Polycom, Inc.
9
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
8 Select Administrator and click Change Account Type. Exit from the application when finished.
Polycom, Inc.
10
Templates
Once you have created your administrator user and added it to the Administrator Group, you can create
new recording, transcoding, and VRR templates on the Polycom RSS 4000 or RealPresence Capture
Server.
Recording Template
To create a new recording template:
1 In the left menu, select Template > Recording Templates, then click Add.
2 Enter the following information:
 Template Name: Enter a descriptive name
 Check the box next to Live Streaming
 In the Call tab configure the following settings:

Max Call Rate (Kbps):Customer dependent, default is 768

Max Resolution: 1280x720P (120x720)

Check the box next to Enable LPR

Indication Tone: Customer depending, usual setting is OFF

Media Encryption Type: Default is When Available
Polycom, Inc.
11
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 In the Archiving tab, configure the following setting:

Check the box next to Start Recording Immediately
 In the Live Streaming tab configure the following settings:

Media Type: MP4

Check the box next to Enable H.264 High Profile for Live Streaming

Primary Streaming Rate: 768

Secondary Streaming Rate: 384

Layout: Single Window with Large Content (people2)

Set “Enable H.264 High Profile for Live Streaming”
3 Click OK.
The final recording template is shown next.
Transcoding Template
To create a new transcoding template:
1 In the left menu, select Template > Transcoding Templates, then click Add.
Polycom, Inc.
12
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
2 Enter the following information:
 Template Name: Enter a descriptive name
 Media Type: MP4
 In the Video tab configure the following settings:

Bit Rate:768

Video Type: H264

Frame Rate: As Source File

Max Resolution: 1280x720P (120x720)

Aspect Ratio: Auto

Layout: Single Window with Large Content (people2)
 In the Snapshot tab, configure the following setting:

Polycom, Inc.
Check the box next to Snapshot Enable
13
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
3 Click OK.
The final transcoding template is shown next.
VRR Template
To create a new VRR template:
1 In the left menu, select Template > VVRs, then click Add.
2 Enter the VVR Name, VVR Number, and Description (optional) information in the appropriate
fields.
3 Set the Recording Template to PRMM Template.
4 In the Transcoding Template section, select PRMM Transcoding Template in the Available
Templates box and click Add to move it to the Selected Templates box.
Polycom, Inc.
14
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
5 Click Add next to Live Streaming Server.
6 Set the Streaming List rate to 768 Kbps and click Save.
Note: Only one server is allowed per VRR.
7 If you want the system to send an email when a stream has started or stopped, enter a valid email
address in the Email Address field and click OK.
The final VRR template is shown next.
Polycom, Inc.
15
Content Creation Profiles
Once you have created the templates on the RSS4000 or RealPresence Capture Server, you must use
the RealPresence Media Manager Admin Tool to create or configure content creation profiles.
Create Default Content Creation Profile
To create the default content creation profile:
1 Log in to RealPresence Media Manager.
The default User Name is [email protected] and the default password is Polycom456.
2 On the bottom left toolbar, select Network Resources.
3 Open the Content Creation Profiles tab.
4 Right click on Default Content Creation Profile and select Properties.
A single default event has been created for your use on the first rule that is shown below. You must
create another event for any additional rules that you create.
5 Select the Destination Categories tab as shown next.
Polycom, Inc.
16
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
6 Click New Destination Category Rule and select Polycom RSS 4000/Capture Server VRRs as
shown next.
7 Click on the RSS tab and enter the following information:
 Destination Category: click the
box
Notice the left tool bar changes to the Media Manager Portal.
 Select the tab next to Media Manager Root to expand the tree.
 Select the tab next to your RealPresence Media Manager instance or appliance to expand the
tree
Polycom, Inc.
17
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 Select Default Category and then click Add.

Check the box next to Set Content Online

To the right of Polycom RSS/Capture Server VRRs, click Refresh. You might have to click
the Refresh button a few times so the Available RSS or Capture Severs get displayed.

Click on the tab next to Available RSS4000s/Capture Servers.

Click on the tab next to Capture Server Content Source Profile.

Select the available VRRs that will be used.
8 Click Save. Both a rule (bottom entry) and event (top entry) are created, as shown next.
Create an Event
For each rule, you must create an Event. However, RealPresence Media Manager Appliance systems
come with a default event, so you do not need to create one if you wish to use the default event. If you do
not see the event or wish to create a new one, continue with the information in this section.
To create an Event:
1 Click New Destination Category Rule and select Events and UNC/URL, as shown next.
A new tab will appear, as shown next:
Polycom, Inc.
18
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
2 On the Destination Categories tab, click the
button and fill in the following information:
 Click Default Category and click Add next to Destination Category.
 Check the box next to Set Content Online
3 Select the Thumbnail tab and fill in the following information:
 Check the box next to Thumbnail Generation
 Width (px): 240
Polycom, Inc.
19
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 Thumbnail Server: Default Content Server
 Thumbnail Start Time (hh/mm/ss): 1 second
4 Click Save and then click Close.
Note: Transcoding
The RealPresence Media Manager will do the transcoding.
RealPresence Capture Server Content Source
Profile
To create the RealPresence Capture Server content source profile:
1 Log in to RealPresence Media Manager.
The default User Name is [email protected] and the default password is Polycom456.
2 On the bottom left toolbar, select Network Resources.
3 Open the Content Source Profiles tab, click New, and enter the following information:
Polycom, Inc.
20
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 Name: Capture Server Content Source Profile
 Description: Capture Server Content Source Profile for Capture Server
 Available Portals: Select the portal you are running this from.
 Type: Select Polycom RSS 4000/Capture Server
 URL Path: Enter the URL path of Capture Server (https://<IPAddress> or https://<FQDN>)
Note: This entry then opens another sequence of information
 Username and Password: This is an administrator user account that was created on the
Capture Server.
 Set Automatic scan this server every X seconds to 10.
 Content Creation Profile: Select Default Content Creation Profile
If you find that Capture Server Content Creation Profile is not located in the drop down box,
verify that all the files in the work area are saved and closed. If a file is not saved, then the file
name in the work area has an “*” in the title.
 Clear the checkbox next to Import Live Windows Media Calls
 Check the box next to Import Live H.264 Calls
 Check the box next to Import Archived Calls

Clear the checkbox next to Import Windows Media Files

Check the box next to Import MP4/MP3 Files and select Default Content Server from the
drop down box

Check the box next to Import New Content Only
Polycom, Inc.
21
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
 Virtual Recording Rooms (VRRs): Under Number of Archives, Version, and Virtual Meeting
Rooms, click Refresh.
Profiles from the RealPresence Capture Server will be copied here as shown next VRRs must
be copied from the RealPresence Capture Server, or this profile cannot be saved, and profile
must be created before you can continue. You must also verify that the version number coming
from the RealPresence Capture Server is correct and that you have the right number of VRRs
available.
If VRRs are added to the RealPresence Capture Server, you must come back to this profile and
Refresh to add in the new VRRs.
4 Click Save. To verify the profile was created correctly, close the Content Source Profile tab and
reopen it.
Polycom, Inc.
22
External Media Servers
For live-streaming of MP4 content from an Polycom RSS 4000 version 8.0 and later, or RealPresence
Capture Server, you need to publish to external media servers. RealPresence Media Manager software
distributes the stream through an MSA. Supported media servers include the following:
● Wowza Media Server
● QuickTime Streaming Server
● Internet Information Service (IIS) 7 Media Services
For more information about configuring Polycom RSS 4000 or RealPresence Capture Server appliances
for external media servers, see the Polycom® RealPresence Capture Server, Appliance Edition User’s
Guide.
You need to meet the following conditions when configuring Polycom RSS 4000 or RealPresence
Capture Server appliances and RealPresence Media Manager software for external media servers.
● Each Virtual Recording Room (VRR) requires its own external server definition for Publish
Point.isml
● External servers must have VOD and FTP options enabled
● You need to add both the RSS and Event rules to the CCP’s Destination Categories rules
(described next). If you do not add the Events rule, live streams will not appear in the
RealPresence Media Manager portal.
● If you set two bit rates, two buttons will display in the RealPresence Media Manager player.
Enable IIS Authorization Setting
To enable IIS authorization:
1 Go to Start > Internet Information Service (IIS) Manger.
2 In the left-hand menu, click Media Manager Portal, Content, and then Media.
3 In the Media Manager Portal Home window that displays, click Authentication.
Polycom, Inc.
23
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
4 Select Windows Authentication and click Enable.
The Windows Authentication should change to Enabled status as shown following.
Create Live Publishing Points on the IIS Server
To create live publishing points on the IIS server:
1 Go to Start > Internet Information Service (IIS) Manger.
Polycom, Inc.
24
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
2 In the left-hand menu, click Media Manager Portal, Content, and then Media.
3 In the Media Manager Portal Home window that displays, click Live Smooth Streaming
Publishing Points.
4 In the Actions section on the right side of the screen, under Publishing Point, click Add to open
the Add Publishing Point wizard.
5 In the Basics Settings tab, enter the file name with .isml as the file extension (example:
Live1.isml).
Polycom, Inc.
25
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
6 In the Advanced Settings tab, configure the following:
 Clear the checkbox next to Archive media
 Check the box next to Allow client connections
 Select Enable DVR for recent content
 In the DVR window length (in minutes) field, enter 2
 Clear the checkbox next to Allow server connections
 Check the box next to Start publishing point automatically upon first client request
 Add 2 minutes to “Number of look ahead fragments”
 In the Number of associated fragments field, enter 2
7 In the Mobile Devices tab, configure the following:
 Check the box next to Enable output to Apple mobile digital devices
 Check the box next to Enable iOS 3.0 compatibility
 Click OK.
Polycom, Inc.
26
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
The file will appear as the following:
To edit the publishing point file:
1 In the left-hand menu, click Media Manager Portal, Content, and then Media.
2 Right click on the .isml file you created and select Edit.
Polycom, Inc.
27
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
3 Add the following string into the file at the location shown in the following screen capture: <meta
name="restartOnEncoderReconnect" content="true" />
4 Save the file.
5 Exit out of the Windows Explorer window.
Start Live Publishing Points on the IIS Server
To start live publishing points in the IIS server:
1 In the left-hand menu, click Media Manager Portal and then Live.
2 Click Live Smooth Streaming Publishing Points.
Polycom, Inc.
28
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
3 Select <filename>.isml and click Start Publishing Point on the right toolbar.
4 Select <filename>lo.isml and click Start Publishing Point on the right toolbar.
The state for each file should display as Starting.
5 Close all windows.
Create External Media Server
To create an external media server on RealPresence Capture Server:
1 From the RealPresence Capture Server left hand menu, select Server > IIS, then click Add.
Polycom, Inc.
29
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
2 Configure the IIS server with the following information:
 Server Name: Enter a name for the server
 Server Address: If configuring on the RealPresence Media Manager Appliance, add the IP
address of the RealPresence Media Manager
 Server Port: 80
 Check the box next to Enable Live
 Application Name: /content/media
 User Name and Password: Use the user name and password from the RealPresence Media
Manager administrator account
For the User Name entry, enter the name of the server in front of the user name (Example:
PRMMAppliance\AdminUserName)
 Click Test to verify that the connection has been made as shown next.
3 Click OK to save the configuration.
This new IIS server entry will display, as shown next.
Polycom, Inc.
30
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
Admin Tip: Disabling Windows Firewall for Testing
To successfully test RealPresence Capture Server, you may need to disable the Windows
Firewall on the RealPresence Media Manager Server. This can be done by going to Control
Panel> Windows Firewall> Turn Windows Firewall on or off.
Reset the IIS Server
To reset the IIS server:
1 Remotely login into RealPresence Media Manager.
2 Click Start and select Windows Powershell.
3 Type iisreset.
After resetting the IIS server, verify that the publishing points are running.
To verify that the publishing points are running:
1 In the left-hand menu, click Media Manager Portal and then Live.
2 Click Live Smooth Streaming Publishing Points.
Polycom, Inc.
31
Polycom RSS 4000 / RealPresence Capture Server 1.6 and RealPresence Media Manager 6.6 Integration Guide
3 Verify that <filename>1.isml and <filename>lo.isml State displays as Starting.
4 If the status is Stopped, select the Start Publishing Point on the right side menu.
Polycom, Inc.
32
Get Help
For more information on integrating Polycom RSS 4000 and RealPresence Capture Server with
RealPresence Media Manager, refer to the following information listed on this page.
Polycom and Partner Resources
For more information about installing, configuring, and administering Polycom products, refer to
Documents and Downloads at Polycom Support.
The Polycom Community
The Polycom Community gives you access to the latest developer and support information. Participate in
discussion forums to share ideas and solve problems with your colleagues. To register with the Polycom
Community, simply create a Polycom online account. When logged in, you can access Polycom support
personnel and participate in developer and support forums to find the latest information on hardware,
software, and partner solutions topics.
Go directly to the UC Infrastructure Developer Community at community.polycom.com.
Polycom, Inc.
33

Download Report