Last updated: 30 January 2015 SHORT CV DR. MOHD FADZLI BIN ABDOLLAH Senior Lecturer, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, MALAYSIA. Tel : +606 234 6805 Fax : +606 234 6884 E-mail : [email protected] Url : http://www.utem.edu.my/myweb/mohdfadzli Full CV : http://www.mytribos.org/pdf/fadzli.pdf BIOGRAPHY Mohd Fadzli Bin Abdollah, received his B.Eng. (Hons.) and M.Eng. in Mechanical Engineering from Universiti Kebangsaan Malaysia (UKM) in 2004 and 2005, respectively. His professional life at the Universiti Teknikal Malaysia Melaka (UTeM) began in 2005 as a lecturer in the Department of Automotive, Faculty of Mechanical Engineering. Later in 2011, he completed his Dr.Eng. specifically in Tribology from Nagoya University, Japan. Upon completion of his study, he has been promoted to senior lecturer since 2012. His research interests include wear of materials, surface engineering & coatings, lubricants, and automotive tribology. Currently, he is supervising 2 Ph.D and 5 Master students. He has 4 ongoing projects, where he is the principle researcher, at both national and international levels. His publications include more than 20 journals and proceedings in both ISI and Scopus indexed articles. He has authored 1 handbook in Malay translation version. He has won more than 10 academic and research awards. Two (2) intellectual properties have been filed. Recently, he held the position of Manager of Centre of Excellence (CoE) at the Centre for Advanced Research on Energy (CARe), UTeM. In addition, he has also been appointed as the Vice Secretary of Malaysian Tribology Society (MYTRIBOS)(Membership ID=L0213) since 2013. In conjecture, he is one of the key pioneers in developing the Green Tribology and Engine Performance (G-TriboE) Research Group, UTeM. Besides, he is an active member in Society of Tribologist and Lubrication Engineers (STLE)(Membership ID=60913), Institute of Engineers Malaysia (IEM) (Membership ID=34309) and Board of Engineers Malaysia (BEM)(Membership ID=GE49335A). His other past administrative duty included Head of Department (Diploma Studies) at Faculty of Mechanical Engineering, UTeM. RESEARCH INTERESTS Wear of Materials; Surface Engineering & Coatings; Lubricants; Automotive Tribology EDUCATION Dr.Eng. in Mechanical Science and Engineering, Nagoya University, JAPAN. M.Eng. in Mechanical Engineering, Universiti Kebangsaan Malaysia, MALAYSIA. B.Eng. (Hons.) in Mechanical Engineering, Universiti Kebangsaan Malaysia, MALAYSIA. EMPLOYMENT 2012 – Present : 2005 – 2012 : 2005 – 2005 : 2004 – 2005 : Senior Lecturer, Universiti Teknikal Malaysia Melaka, MALAYSIA. Lecturer, Universiti Teknikal Malaysia Melaka, MALAYSIA. Package Development Engineer, Vishay Semiconductor (M) Sdn. Bhd. MALAYSIA. Tutor, Universiti Kebangsaan Malaysia, MALAYSIA. 1|Page ADMINISTRATIVE POSITION 2013 – Present : 2013 – Present : 2012 – 2013 : Manager of CoE, Centre for Advanced Research on Energy, UTeM Vice Secretary, Malaysian Tribology Society (MYTRIBOS) Head of Department (Diploma Studies), Faculty of Mechnical Engineering, UTeM. ON-GOING RESEARCH PROJECTS (Principle researcher) [1] 2012 – 2014 : A New Thermal Management of HEVs/EVs Battery Modules With MicroPCM/CNT Composites. RAGS/2012/UTEM/TK01/1 – National level. [2] 2013 – 2014 : Experimental Investigation to the Effect of Nano-Based Engine Oil on Performance and Emission Characteristics of a Diesel Engine. GLUAR/2013/FKM(2)/A00003 – International level. [3] 2013 – 2015 : A Comparative Study of Tribological Behaviour of New Palm Shell Activated Carbon Reinforced Aluminum Matrix Composite (PSAC-Al) In Different Environmental Conditions. ERGS/2013/FKM/TK01/UTEM/02/04/E00016 – National level. [4] 2013 – 2015 : New Strategies for Energy Saving: The Future Focus on Energy Efficient Vehicles (EEVs) In Malaysia. TD-FRGS/1/2013/UTEM/02/1 – National level. INTELECTUAL PROPERTY [1] LY2014000258 (Copyright) – Emerging Lubrication Technology for Ball Bearings (filed) [2] LY2014000259 (Copyright) – Nano-oil for a Greener Future (filed) PUBLICATIONS (selected) : Current H–index = 3 (Scopus) [1] A. Mustafa, M.F.B. Abdollah, N. Ismail, H. Amiruddin, N. Umehara, Selection and Verification of Kenaf Fibres as an Alternative Friction Material Using Weighted Decision Matrix Method, Materials & Design, 67 (2015), pp. 577-582. DOI: http://dx.doi.org/10.1016/j.matdes.2014.10.091. (ISI indexed). [2] A. Mustafa, M.F.B. Abdollah, N. Ismail, H. Amiruddin, N. Umehara, Materials Selection for Eco-Aware Lightweight Friction Material, Mechanics & Industry, 15:4 (2014), pp. 279-285. DOI: http://dx.doi.org/10.1051/meca/2014039. (ISI indexed). [3] M.I.H.C. Abdullah, M.F.B. Abdollah, H. Amiruddin, N.R. Mat Nuri, N. Tamaldin, M. Hassan, S.A. Rafeq, Effect of hBN/Al2O3 Nanoparticles on Engine Oil Properties, Energy Education Science and Technology Part A, 32:5 (2014), pp. 3261-3268. (Scopus indexed). [4] M.F. Abdollah, M.A.A. Mazlan, H. Amiruddin, N. Tamaldin, Experimental Study on Friction and Wear Behaviors of Bearing Material under Gas Lubricated Conditions, Jurnal Teknologi (Sciences and Engineering), 66:3 (2014), pp. 43-49. DOI: http://dx.doi.org/10.11113/jt.v66.2693. (Scopus indexed). [5] M.I.H.C. Abdullah, M.F. Abdollah, H. Amiruddin, N. Tamaldin, N.R. Mat Nuri, Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil, Jurnal Teknologi (Sciences and Engineering), 66:3 (2014), pp. 1-6. DOI: http://dx.doi.org/10.11113/jt.v66.2685. (Scopus indexed). [6] M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Miyamoto, T. Tokoroyama, N. Umehara, Future Developments of a Deformation-Wear Transition Map of DLC Coating, Tribology Online, 7:3 (2012), pp. 107-111. DOI: http://dx.doi.org/10.2474/trol.7.107. (Scopus indexed). [7] M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Miyamoto, T. Tokoroyama, N. Umehara, Deformation-Wear Transition Map of DLC Coating Under Cyclic Impact Loading, Wear, 274-275 (2012), pp. 435-441. DOI: http://dx.doi.org/10.1016/j.wear.2011.11.007. (ISI indexed). [8] M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, T. Tokoroyama and N. Umehara, The Effect of Maximum Normal Impact Load, Absorbed Energy, and Contact Impulse, on the Impact Crater 2|Page Volume/Depth o DLC Coating, Tribology online, 6:6 (2011), pp. 257–264. DOI: http://dx.doi.org/10.2474/trol.6.257. (Scopus indexed). [9] M.F.B. Abdollah, Y. Yamaguchi, T. Akao, N. Inayoshi, N. Umehara and T. Tokoroyama, Phase Transformation Studies on the a-C Coating under Repetitive Impacts, Surface and Coatings Technology, 205 (2010), pp. 625-631. DOI: http://dx.doi.org/10.1016/j.surfcoat.2010.07.062. (ISI indexed). JOURNALS EDITOR (selected) [1] Associate Editor-in-Chief, Jurnal Tribologi (Google Scholar Indexed; ISSN: 2289-7232). [2] Editor, Buku Panduan Galas Datar (Handbook of Plain Bearings) (ISBN: 9789831007884) 2015. [3] Chief Guest Editor, Jurnal Teknologi (Sciences and Engineering) (Scopus; ISSN: 1877-7058): Special Issue on Recent Advances and Challenges in Energy Research for Greener Future – 2015 [4] Guest Editor – Transactions of the IMF (ISI indexed; ISSN: 0020-2967): Special Issue on Materials and Surface Engineering in Tribology - 2016. [5] Guest Editor, International Journal of Surface Science and Engineering. (ISI; ISSN: 1749-7868): Special Issue on Tribo-surfaces for Sustainable Development – 2016. [6] Guest Editor, International Journal of Materials and Product Technology (ISI; ISSN: 0268-1900): Special Issue on Materials Design and Development in Tribology - 2016. [7] Guest Editor, Advances in Tribology (Scopus; ISSN: 1687-5915): Special Issue on Recent Advances and Challenges in Tribology Research for Sustainable Development – 2016. [8] Guest Editor, Jurnal Teknologi (Sciences and Engineering) (Scopus; ISSN: 1877-7058): Special Issue on Recent Research in Tribology – Vol. 66, No. 3, 2014. INVITED SPEAKER [1] Invited speaker - JAST Tribology Conference, Spring 2014, Tokyo, 19-21 May 2014. [2] Invited speaker - Short course “Materials selection for engineering eco-design using CES”, UTeM, 12 February 2014. AWARDS [1] Bronze Medal, Malaysia Technology Expo 2014 for “Emerging Lubrication Technology for Ball Bearings” (Principle Researcher). [2] Gold Medal, UTeM Research and Innovation Expo 2013 for “Nano-Oil as Effective Lubricants for Improving a Small Diesel Engine Performance” (Principle Researcher). [3] Silver Medal, UTeM Research and Innovation Expo 2013 for “Emerging Lubrication Technology of Bearing Materials” (Principle Researcher). [4] Silver Medal, International Conference and Exposition on Invention of Institutions of Higher Learning 2013 for “Nano-Oil for a Greener Future” (Principle Researcher). [5] Silver Medal, BioMalaysia & Bioeconomy Asia Pacific 2013 Conference & Exhibition for “Nano-Oil for a Greener Future” (Principle Researcher). [6] 1st Runner-Up, Perodua Eco-Challenge 2013 (Co-Researcher). [7] University Academic Award 2013 – Special Award (PECUTeM2013 Group): Winner [8] University Academic Award 2013 – Research Award: Consolation prize [9] 2nd Runner-Up, Proton Green Mobility Challenge 2012 (Co-Researcher). [10] Outstanding Service Award 2012, Universiti Teknikal Malaysia Melaka. [11] Dean List Award 2004/2005, Faculty of Engineering, Universiti Kebangsaan Malaysia. 3|Page