Optimum mold temperature control is the key to stabilizing molding quality and shortening molding cycle. MC(L H A)-25/55/88-X MC(L H A)-25/55/88 MC-5 Mold Temperature Controller MCHH-55/88 Mold Temperature Controller High Temperature Type Mold Temperature Controller Cascade Pump Best suited for molds of injection molding MC is the regular item for safe and stable control of mold temperature. MC-5 is the compact type mold temperature controller that can be supported to the complicated watercourse of precise molding etc. and it uses strong material for forming rust, too, compactly. Mold temperature controller that supports 160°C temperatures by using water. Since no oil is used as a medium, it is free from odors, contamination and effluent, and does not pollute the environment. MCLX HX Mold Temperature Controller MCLX/MCHX promotes stable temperature control and high level of safety for large flow rate. Spiral Pump Suitable for roll jacket and molds that require high flow rate Magnet Pump Zero water and oil leakage MCM-SC MCAX-20 50 Mold Temperature Controller Mold Temperature Controller MCM-SC is the mold temperature controller for compact optical molding which realized stable temperature control and high safety. The ±0.1-0.3°C temperature have supported Max. 145°C fresh water can be controlled. MCAX-20 50 promotes stable temperature control and high level of safety under high pressure. MCAX MCJ-AA Temperature Controller Temperature Controller MCAX promotes stable temperature control and high level of safety for large flow rate. MCJ-AA promotes stable temperature control and high level of safety for large flow rate. Temperature Controller MIC-L/H MCX Feed Throat Tenperature Controller for Molding Machine Coolling & Heating Unit MCC5 MCC5- Chiller Chiller First appearance in the industry! This is a chiller equipped with an inverter for pursuing energy-savings. An air-cooled type cooling device for material inlet on molding machine that does not require water supply and provides stable feeding of materials and quality of end products. A water-cooled type cooling and heating unit that combines chiller and mold temperature controller into a single unit and support a wide range of temperature from 10°C to 90°C. A water-cooled type chiller that is resistant to seasonal changes and can be used anytime in the year. ondenser is a double tube type. For this reason, durability is improving to the foul cooling water. MCCA3 RAD/RAM Chiller (Air Cooled Type) Cooling & Heating Unit(Air Cooled Type) MCCA3, an air-cooled type chiller ensures stable temperature control and high level of safety. There is no need for primary side cooling water and all models uses the new refrigerant, R407C,R410A . ec brid Air-cooled Closed Circuit Water Cooling System Ecobrid supplied by Matsui is an Air cooled Closed type Water Cooling System that has high functionality, cost efficient and environmental friendly. 5500 sets are already in operation with satisfactory results.. An air-cooled type cooling and heating unit for mold that supports a wide range from 10°C to 90°C and does not require water supply. List of Plastics Easy Selection Material Material Temp. Mold Temp. Specific Heat Latent Heat ABS 200 260 40 60 0.3 0.4 AS 200 260 40 60 0.32 0.34 MCL, PS 200 300 40 60 0.32 MCLX, PE 150 300 40 60 0.56 Mold Temp.Controller Genelral Plastics Engineering Plastics PP 160 260 55 65 0.46 PVC 180 250 45 60 0.20 0.28 38 58 MCH, 43 57 MCHX PMMA 200 260 50 70 0.35 PA 200 320 80 120 0.4 PC 280 320 90 120 0.3 PBT 230 270 80 120 0.34 0.49 28 MCHH, POM 180 220 90 110 0.35 39 MCA, PPS 290 350 80 180 0.24 MCAX PES 330 370 100 150 0.26 MCH,MCHX,MCHH,MCA,MCAX PEEK 350 400 130 180 0.32 MCHH,MCA,MCAX PPO 245 300 80 100 31 39 MCH, MCHX, MCH,MCHX,MCHH List of Compatible Temperature Medium : Clean Water Medium : Thermal Oil 120 320 60 200 60 180 160 MCHH -55 -88 145 130 120 95 10 90 MCX -200 -300 90 MIC-H MIC-L MCL-5 5 35 MCC5-i -08 5 30 -10 MCC5 -15 -03 -20 -05 -08 MCCA3 -10 -100 -15 -200 -20 -300 -30 RAD /RAM -25 -40 -80 MCL -25 -55 -88 MCLX -200 -350 -450 MCH -5 -25 -55 -88 MCM -151SC 60 120 MCH -55PDD -88PDD MCHX -200 -350 -450 Air Cooling Type Air Cooling Type Please contact nearest MATSUI Sales Office for custom made product. MCM -601SC MCHX -200PDD -350PDD -450PDD MCHX -200P -350P -450P Water Supply Temperature+20°C Air Cooling Type Anbient Temperature Water Supply +10°C Temperature+10°C 60 130 Water Supply Temperature+10°C Water Supply Temperature+10°C 60 160 MCA -25 -55 -88 MCAX -20 MCAX -50 -140 -250 -400 MCJ -165AA -250AA -350AA List of Pump Flow Rate Medium : Clean Water Selection Target Medium : Thermal Oil 450 Selection Target 450L/min Selection Target 400 3000 300 400L/min 8500 850 350L/min 350L/min 250L/min 300 250 2000 200 250L/min 250L/min 140L/min 165L/min 200 200L/min 6500 650 180 160 150L/min 140 132L/min 110 4500 450 Temperature Controller 350 109L/min 90L/min 90 96L/min 109L/min 90L/min 3000 300 80 70 60 62L/min 55L/min 50 52L/min 41L/min 40 1500 150 30 20 500 50 kN (ton) 10 L/min Flow Rate 21L/min 17L/min 47L/min 33L/min 58L/min 47L/min 2000 200 60L/min 55L/min 52L/min 41L/min 40L/min 32L/min 40L/min 32L/min 1000 100 500 50 23L/min 18L/min 58L/min 47L/min 23L/min 18L/min 10L/min (MIC-L) (MIC-H) MCH-5 MCM-601SC MCHH-88 MCL(H)-88 MCLX(HX)-450 MCX-300 MCL-5 MCM-151SC MCHH-55 MCL(H)-55 MCLX(HX)-350 MCX-200 MCL(H)-25 MCLX(HX)-200 Clamp Force. RA-80 RA-40 RA-25 kN (ton) MCAX-50 MCAX-20 MCA-88 MCA-55 MCA-25 MCAX-400 MCJ-350AA MCAX-250 MCJ-250AA MCAX-140 MCJ-165AA Clamp Force. Clamp Force. Mold Temperature Controller kN (ton) Mold Temperature Controller Temperature Controller Temperature Controller 2500 250
© Copyright 2024 ExpyDoc
