MCM-SC Mold Temperature Controller Cascade Pomp (Non Seal Type) Summary MCM-SC is the mold temperature controller for compact optical molding which realized stable temperature control and high safety. The ±0.1~0.3°C temperature have supported Max. 145°C fresh water can be controlled. PV SV Operating Status ALARM RESET ON/OFF MONITOR Alarm Features FOR SETTING PV SV SFT DWN UP ENT Before Maintenance High accuracy temperature controller and operation. Monitors temperature with 0.1°C resolution. Temperature Contoller with less than ±0.5°C resolution Attains 0.25sec of sampling cycle. New control algorithm to reduce transient overshoot. Ensures higher accuracy in temperature control and high level of safety during operation. Reminders for periodical maintenance and other maintenance items can be easily set. Temp Display/Setting: Digital Display/Setting Temp Controller: Heating & Cooling PID Control Machine maintenance made easier. Input: The interior lay-out with a view to set into the molding machine Almost pipe-less by utilizing manifold-block Prevents water leak throughly Heater Control with SSR (non-contact relay) Memory: SV1 SV2 Timer: 0 LCD Message Display: Operation Status Alarm Periodical Maintenance 99hrs. 59min.(Turns ON After Setting) Operational temperature range max145°C 1/2 About 50% Floor Space Saving. Utilizes non-seal pump The original interior structure corresponds to high temperature Allows flow performance. Rack <Tall Type for MCM>(Options) About 50% Floor Space Saving. (W:500mm x L:710mm = 0.36m2) can choose the set-up location freely. Prevent falling down from flanges and fixed by anchor bolt. Each Unit is fixed on Frame from bottom side with bolts. MCM-601S 4 Conventional Floor Space Floor Space is About 50%. Performance Curve Flow Diagram 50 (m) MCM-SC Water Drain Solenoid Valve Water Drain Float Temperature Controller Lift 40 Medium Return 30 Heater Open Relief Valve Water Supply 20 Control Sensor 10 Medium Feed Pressure Gauge 0 0 10 20 30 40 Flow Rate (L/min) 50 Pump 60 Outer Dimension MCM-SC D 296 D1 Breaker Control Panel 641 796 Unit:mm 128 D2 Water Supply Port Water Drain Port 306 306 Pressure Gauge Medium Return Port Medium Feed Port Caster MCM-601SC MCM-601SC Water Supply Port 1/4B Medium Feed Port 1/2B Ball Valve Medium Return Port 1/2B Ball Valve Standard Specifications Model Unit V Voltage Power MCM-601SC , 3Phase Apparent Power A Breaker Capacity Clean Water (Soft Water) Medium Water Supply Temperature Operational Temperature Range Cooling Capacity Heater Capacity Heater Box Volume Maximum Flow Rate Pump L L/min Output Cooling Method Direct Cooling Flow Rate Cooling Water L/min Pressure Input Water Level Detector Product Weight Float Swich Temperature Controller 3/8Bball Valve Water Drain Port
© Copyright 2024 ExpyDoc
