How to use the corner with small-medium boxes A metod very simple: The operator inserts one or more corners to the angles of the box and takes them away at the end of the operation. 1 2 3 4 5 6 Advantages using the PacSmart system: 1) Saving and optimisation of the operations, thanks to a simple metod, using 1 or 4 Corner per box. 2) It had been tested on all the thickness of the boxes; it is stable, very easy to insert or to remove, it doesn’t damage the box, it prevent the using of adhesive tapes or other homemade metods, complicated and not economic. It provides, tested by our clients, a reduction of dead times during the filling, sampling and closing procedures of the box. 3) It removes the obstruction of the lateral flaps, which are often a waste of time during 4) It is made by a very resistant plastic, thickness 3 mm; it allows the use of the corner for long time. ANDREA BOGONI srl Via Treviso 29 36010 Monticello C. Otto (VI) tel 0444.946875 fax 299435 [email protected] www.pacsmart.eu Das System und das Model sind patentiert. Inhaber des Patents pac smart L’INNOVAZIONE NELL’IMBALLAGGIO Patent Pending VI2011A000107 the canningm the movement and the storage of the opened boxes.
© Copyright 2024 ExpyDoc
