deze - Draytek

How to configure Multi-VLAN in Vigor2130
Vigor2130 supports the function of Multi-VLAN (firmware version: 1.4.0 and after). It can specify
a VLAN ID for WAN port and offers more advanced environmental application for the users
through the bridge technique in WAN port and LAN port.
I. Way to Configure
To enable such function, please do the following:
1. Open WAN>>802.1Q VLAN Tag Configuration. Check the box of Enable Multi-VLAN
Setup.
2. Fill in the VLAN ID number in the field of WAN VLAN ID.
3. If the router you have supports VoIP, you can configure VoIP WAN setting for using by
VoIP interface of the router.
4. In LAN VLAN setting, check the box of Enable (LAN to WAN in bridge mode) and type a
different VLAN ID number.
n
o
p
q
1
II. Example
Chart of Structure
z
PC 1 connects to the first LAN port of Vigor2130 and accesses Internet with WAN
VLAN.
z
PC 2 connects to the forth LAN port of Vigor2130 and accesses Internet with LAN
VLAN.
z
FXS 1 Phone connects to the FXS 1 port of Vigor2130, registers, sends and receives
phone call with VoIP WAN.
Functions Configuration
1. Open WAN>>Internet. Set PPPoE as the Connection Type and fill in the Username and
Password offered by your ISP.
2
3
2. Open WAN>>802.1Q VLAN Tag Configuration to configure Multi-VLAN. Refer to the
following graphic.
3. Open WAN>>VoIP WAN to configure VoIP WAN Setting.
Note: At present, only DHCP, PPPoE and Static connection types are available.
4
4. Open VoIP >>SIP Accounts. Specify the connection interface for VoIP in the field of
Register via.
5. Connect your PC or network device to the forth LAN port and type the username and
password for PPPoE connection mode.
5

Download Report