Megaport Tech Specs Megaport and Megaport VXC technical

V140505
Megaport Tech Specs
About Megaport Services
A Megaport is a high speed Ethernet interface allowing rapid connections between data centres, service providers and peering
partners. Available interface speeds are 10Gpbs, 40Gpbs and 100Gpbs. Megaports are configured as 802.1Q VLAN trunks to
support multiple services on a single port. The MegaIX Internet Exchange, and Virtual Cross Connects (VXC) are each presented as a
unique VLAN.
Virtual Cross Connect – VXC
VXCs are private, point-to-point Ethernet pseudo-wires presented as a VLAN between two Megaports. All VXCs have a large MTU
of 9100 bytes, support Q-in-Q and are transparent to most protocols. VXCs between Megaports in the same state have no speed or
data usage limits. VXCs are available in bandwidth increments of 1Mbps, up to 100Gbps.
Megaport Technical Specifications
Interface Speed
Interface
10Gbps
10BASE-LR, 10BASE-ER
40Gbps
40BASE-LR
100Gbps
100BASE-LR
Service Attribute
Service Parameter/Value
MAC layer
IEEE 802.3-2002
UNI MTU
9100 bytes
VLAN Ethertype
0x8100
Layer 2 control tunneling
Protocol
Action
STP, RSTP, MSTP
Tunnel
PAUSE
Discard
LACP
Discard
Link OAM
Discard
802.1x
Discard
E-LMI
Tunnel
LLDP
Tunnel
GARP
Tunnel
CoS level
Standard
Unicast frame delivery
Deliver unconditionally
Multicast frame delivery
Deliver unconditionally
Broadcast frame delivery
Deliver unconditionally
14-16 Church Street, Fortitude Valley, Queensland 4006, Australia. |
[email protected]
|
1300 GO MEGA

Download Report