KONTEC 2015 program 12th International Symposium „Conditioning of Radioactive Operational & Decommissioning Wastes“ including 12th Status Report of BMBF „Decommissioning and Dismantling of Nuclear Facilities“ March 25 - March 27, 2015 Organizer KONTEC Gesellschaft für technische Kommunikation mbH The equipment and hospitality during KONTEC 2015 are sponsored by: sat. Kerntechnik GmbH 2 KONTEC CAMPUS Within the project KONTEC CAMPUS pre-selected students from university departmens related to the nuclear industry will have the possibility to attend the KONTEC 2015 thanks to the support from famous nuclear companies. Besides seeing the plenary and poster presentations the students can take the opportunity to talk to nuclear industry experts. During tours through the KONTEC 2015 Technical Exhibition guides will show them the exhibitors’ delivery and performance scope and the exhibitors will have the chance to establish contact to the new nuclear generation. KONTEC CAMPUS is supported by: 3 Conference Location MARITIM Hotel & Internationales Congress Center Dresden (ICD) Ostra-Ufer 2 01067 Dresden Germany ICD Big Hall Plenary Sessions ICD Galleries of Halls 1-5, Postersessions restaurant ICD Galleries of Halls 3+4 Panels for short technical lectures KONTEC DIRECT ICD Halls 1-5, restaurant Technical Exhibition and Hall Foyer Conference counter/ The conference counter/ registration desk will be located at the Registration entrance of the MARITIM Internationales Congress Center Dresden (ICD) on the terrace level and will be opened as follows: Tuesday March 24, 2015 06.00 pm – 08.00 pm Wednesday March 25, 2015 08.00 am – 06.30 pm Thursday March 26, 2015 08.00 am – 06.30 pm Friday March 27, 2015 08.00 am – 02.00 pm Wardrobe/ Cloakroom: Warderobe/ Clothing can be checked at the foyer/ terrace level of the ICD for a fee of EUR 1,50 per piece of clothing at the following times. Wednesday Thursday Friday Friday Business center A business center equipped with an internet connected personal computer is located in the MARITIM Hotel. The conference counter’s/ registration desk’s staff can be requested for photocopies (EUR 0,20 per copy) or other office work. Internet Café 4 March 25, 2015 March 25, 2015 March 27, 2015 March 27, 2015 09.00 am – 07.00 pm 08.30 am – 00.30 am 08.30 am – 03.00 pm Again on KONTEC 2015 an Internet cafe will be established in the restaurant of the ICD’s hall level to allow our attendees access to the internet free of charge. Hamburg, November 2014 Professor Dr.-Ing. habil. Dr.-Ing. E. h. Dr. h.c. Friedrich-Wilhelm Bach passed away after severe illness on August 18th, 2014. He was an outstanding personality and a very pleasant colleague, who always acted exemplary and responsibly. The business community lost a special person, whom we will remember for a long time. Professor Bach was chairman of the program committee since Kontec GmbH’s founding in 1994. Under his leadership, a professional expertise board was established, which since 20 years creates the KONTEC event series with current topics of the conditioning of radioactive operational and decommissioning wastes. With this main focus, fundamentally shaped by Professor Bach, the KONTEC event series established internationally as a unique expert conference in its special composition in our field. Shortly before his death, Professor Bach committed the program committee in his own special manner to continue the KONTEC event series in his spirit. We will greatly miss Professor Bach as a person and as a friend. The KONTEC program committee 5 Programme Committee Chairman: Michael Szukala Düsseldorf Vice Chairman: Olaf Oldiges Hanau DAHER-NCS Programme Committee: Michael Bächler ETG Hannover Hans-Jürgen Blenski GNS Essen Dr. Georg Brähler NUKEM Alzenau Dr. Guido Caspary FZJ Jülich Dr. Heinz Geiser GNS Essen Hans Genthner KAH Heidelberg Anja Graf WAK Eggenstein- Leopoldshafen Burkhard Hartmann EnBW Kernkraft Obrigheim Dr. Thomas Hassel Universität Hannover Udo Helwig DDCon Dresden Peter Hildwein Siempelkamp NIS Alzenau Dr. Heinz Kröger TÜV NORD EnSys Hannover Stephan Krüger AREVA NP Erlangen Karin Kugel BfS Salzgitter Dr. Günter Petzold RWE Power Essen Rudolf-Josef Printz FZJ Jülich Andreas Roth amr GPS Hamburg Dr. Jürg Schneider nagra Wettingen, CH Dr. Holger Spann SNT Krefeld Dr. Helmut Steiner KGG Gundremmingen Prof. Dr. Manfred Urban WAK Eggenstein- Leopoldshafen Dr. Ralf Versemann RWE Power Essen Dr. Anton von Gunten BKW Energie AG Mühleberg, CH Dr. Michael Weigl Projektträger Eggenstein- Karlsruhe, KIT Leopoldshafen Dr. Bernhard Wiechers WEG Mannheim Dr. Hannes Wimmer GNS Essen 6 Program Overview Wednesday, March. 25, 2015 10.00 am – 10.20 am Welcome and Opening of KONTEC 2015 10.20 am – 01.00 pm Plenary Session 1 01.00 pm – 02.00 pm Lunch break 02.00 pm – 04.00 pm Plenary Session 2 04.00 pm – 04.30 pm Coffee break 04.30 pm – 05.30 pm Plenary Session 2 Wednesday, March 25, 2015 11.50 am – 01.00 pm KONTEC DIRECT short lectures Panel 1: Session 4 Panel 2: Session 2 02.30 pm – 03.40 pm KONTEC DIRECT short lectures Panel 1: Session 3 Panel 2: Session 1 Wednesday, March 25, 2015 10.00 am – 06.00 pm Postersessions of all Sessions Wednesday, March 25, 2015 10.00 am – 10.00 pm Technical Exhibition Thursday, March 26, 2015 09.30 am – 11.30 am Plenary Session 2 11.30 am – 12.00 am Coffee break 12.00 am – 01.00 pm Plenary Session 2 01.00 pm – 02.00 pm Lunch break 02.00 pm – 03.00 pm Plenary Session 2 03.00 pm – 03.30 pm Coffee break 03.30 pm – 06.10 pm Plenary Session 3 Thursday, March 26, 2015 11.20 am – 12.30 pm KONTEC DIRECT short lectures Panel 1: Session 4 11.20 am – 11.50 am KONTEC DIRECT short lectures Panel 2: Session 1 noon – 12.30 pm KONTEC DIRECT short lectures Panel 2: Session 3 02.00 pm – 02.30 pm KONTEC DIRECT short lectures Panel 1: Session 3 Panel 2: Session 2 03.40 pm – 04.10 pm KONTEC DIRECT short lectures Panel 1: Session 2 Panel 2: Session 1 7 Thursday, March 26, 2015 09.00 am – 06.00 pm Postersessions of all Sessions Thursday, March 26, 2015 09.00 am – 06.00 pm Technical Exhibition Thursday, March 26, 2015 08.00 pm – midnight „KONTEC 2015 Banquet“ Friday, March 27, 2015 09.00 am – 10.40 am Plenary Session 4 10.40 am – 11.10 am Coffee break 11.10 am – 12.30 pm Plenary Session 4 12.30 pm – 01.00 pm Conclusion and Awards for the Best 2015 Plenary, Poster and KONTEC DIRECT short lecture 01.00 pm End of Plenary Sessions Friday, March 26, 2015 09.00 am – 01.00 pm Postersessions of all Sessions Friday, March 26, 2015 09.00 am – 01.00 pm Technical Exhibition 8 Details on the preliminary program and more information about the conference on the following pages. (Details on KONTEC DIRECT Short technical lectures on Wednesday, March 25, 2015 and Thursday, March 26, 2015 are shown each following the daily plenary paper program) Wednesday, March 25, 2015 Plenary Session 10.00 am Welcome and opening of the conference Michael Szukala, Chairmann of KONTEC Program Comittee 10.10 am Welcome Sabine Diehr, Bundesministerium für Bildung und Forschung BMBF Session 1: Disposal of radioactive residues from nuclear facilities‘ operation, decommissioning and dismantling Plenary Session Session Chairpersons Dr. Günter Petzold, RWE Power AG Rudolf-Josef Printz, Forschungszentrum Jülich GmbH 10.20 am (Paper number 052) Transport and Treatment of 15 Boilers from Berkeley NPP Joe Robinson, Studsvik, Gateshead, UK Bo Wirendal, Studsvik, Nyköping, S Nigel Kitt, Studsvik UK Ltd. et. al. 10.40 am (Paper number 019) Dismantling and Recycling of large components taking the CASTOR® S1 as an example Georg Weiß, GNS Gesellschaft für Nuklear-Service mbH Steffen Oehmigen, GNS Gesellschaft für Nuklear-Service mbH Hans-Jürgen Durchholz, sat.Kerntechnik GmbH 11.10 am 9 (Paper number 111) Conditioning of fuel channels at the Mühleberg nuclear power plant, Switzerland Dr. Thomas Taylor, BKW Energie AG Dr. Martina Suty, BKW Energie AG Dr. Anton von Gunten, BKW Energie AG et. al. 11.40 am (Paper number 048) Processing of irradiated control rods at Isar NPP, Unit 1 Ulrich Baumann, AREVA GmbH Klaus Mayer, AREVA GmbH Reinhard Kaschel, E.ON Kernkraft GmbH, KKW Isar 12.10 pm (Paper number 032) Building and site clearance of the KWW – a review Dr. Stefan Wörlen, Brenk Systemplanung GmbH Peter Duwe, E.ON Kernkraft GmbH, Kernkraftwerk Würgassen Matthias Spieker, E.ON Kernkraft GmbH, Kernkraftwerk Würgassen et. al. 12.40 pm (Paper number 104) Experiences in managing the Site Radwaste Treatment Facility (SRTF) project, Sanmen, People’s Republic of China Peter Lohmann, Westinghouse Electric Germany GmbH 01.00 pm Lunch break Session 2: Decommissioning and dismantling of nuclear facilities Plenary Session Session Chairpersons Anja Graf, WAK Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs GmbH Dr. Helmut Steiner, Kernkraftwerk Gundremmingen GmbH 02.00 pm (Paper number 036) First Decommissioning of a Commercially Operated Nuclear Power Plant in Switzerland Dr. Anton von Gunten, BKW Energie AG Julia Heizinger, BKW Energie AG Thomas Herren, BKW Energie AG et. al. 10 02.30 pm (Paper number 078) Performance Improvement and Human Resources Transition Management in D&D Projects Gilles Clément, AREVA NC Karl Wasinger, AREVA GmbH 03.00 pm (Paper number 031) Completion of dismantling of the nuclear part of the Würgassen Nuclear Power Station Karsten Beier, E.ON Kernkraftwerk Würgassen 03.30 pm (Paper number 087) Decommissioning Concepts for the Norwegian Nuclear Research Facilities Halden and Kjeller Gunnar Hedin, Westinghouse Electric Sweden AB Niklas Bergh, Westinghouse Electric Sweden AB Per Lidar, Studsvik Nuclear AB et. al. 04.00 pm Coffee break Session 2: Decommissioning and dismantling of nuclear facilities (Continuation) Plenary Session Session Chairpersons 04.30 pm Anja Graf, WAK Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs GmbH Dr. Helmut Steiner, Kernkraftwerk Gundremmingen GmbH (Paper number 066) The radiating heritage of science – Disassembly and disposal of experimental residues from the operation of a research reactor Burkhard Stahn, Forschungszentrum Jülich GmbH Rudolf Printz, Forschungzentrum Jülich GmbH Stephan Werbelow, Forschungszentrum Jülich GmbH et. al. 05.00 pm (Paper number 100) Experiences from José Cabrera RV segmentation project Per Segerud, Westinghouse Electric Sweden AB Per Lundén, Westinghouse Electric Sweden AB 05.30 pm 11 End of Plenary Session on Wednesday KONTEC DIRECT Short technical lectures in word & vision Wednesday, March 25, 2015, 11.50 am – 01.00 pm Panel 1 - Session 4 11.50 am (Paper number 077) – Box 61 Subsequent declaration of old EWN waste Dr. Cornelia Rittmeyer, Energiewerke Nord GmbH 10 minutes for rebuilding 12.10 pm (Paper number 040) – Box 60 Autoradiographic examination of irradiated reactor graphites Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich 10 minutes for rebuilding 12.30 pm (Paper number 018) – Box 59 Material characterisation of conditioned waste: Ways to declare problematic material component Christel Herzog, VKTA Dresden 10 minutes for rebuilding 12.50 pm (Paper number 010) – Box 58 Investigations on the chemical composition of radioactive drum-dryer product in a cement-matrix Dr. Henrik Daniels, Forschungszentrum Jülich GmbH 11.50 am Wednesday, March 25, 2015, 11.50 am – 01.00 pm Panel 2 - Session 2 (Paper number 006) – Box 23 Adaptation of radiological room air and ex-vent air monitoring to the decommissioning and dismantling phases of nuclear plants Dr. Richard Nakath, IABG mbH 10 minutes for rebuilding 12.10 pm (Paper number 014) – Box 24 - BMBF AZURo Research Project – Automatic disassembly of reactor pressure vessel internals by underwater robotic techniques Gunnar Heinzler, AREVA GmbH 10 minutes for rebuilding 12 12.30 pm (Paper number 060) – Box 25 Virtual test rig supporting remote dismantling of the Karlsruhe Vitrification Plant (VEK) Wolfgang Metzger, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH 10 minutes for rebuilding 12.50 pm (Paper number 106) - Box 26 Supplementary requirements: basic principles – assessment – documentation – preparation in nuclear plant dismantling Nils Warning, BARTSCH WARNING PARTNERSCHAFT Wednesday, March 25, 2015, 02.30 pm – 03.40 pm Panel 1 - Session 3 02.30 pm (Paper number 016) – Box 39 - BMBF Electrochemical oxidation of C-14 – containing liquid organic wastes – a future alternative route to conventional inicineration Hans-Jürgen Friedrich, Fraunhofer Gesellschaft/ Institut für Keramische Technologien und Systeme (IKTS), Außenstelle Dresden-Rossendorf 10 minutes for rebuilding 02.50 pm (Paper number 076) – Box 41 Decontamination of liquid radioactive waste by means of inorganic absorber on the example of 137Cs Natalia Trigubowitsch, Forschungszentrum Jülich GmbH 10 minutes for rebuilding 03.10 pm (Paper number 064) – Box 40 Defined removal of reinforced concrete Ulrich Hess, IFW Hannover 10 minutes for rebuilding 03.30 pm 13 (Paper number 095) – Box 42 Laser decontamination of paint coats containing PCB Dr.-Ing. Anton Philipp Anthofer, TU Dresden Wednesday, March 25, 2015, 02.30 pm – 03.40 pm Panel 2 - Session 1 02.30 pm (Paper number 082) – Box 3 - BMBF Determining the activity inventory of bituminized waste Elvira Mesalic, TU München, RCM 10 minutes for rebuilding 02.50 pm (Paper number 033) – Box 1 Clearance measurements of inaccessible and covered building surfaces in the nuclear power plant Würgassen Dr. Tobias Hein, Brenk Systemplanung GmbH 10 minutes for rebuilding 03.10 pm (Paper number 034) – Box 4 In-situ clearance of large components as demonstrated by the example of the cranes in the KWW power house Bastian Degner, Brenk Systemplanung GmbH 10 minutes for rebuilding 03.30 pm (Paper number 118) – Box 2 Reduction of false alarms in portal monitors by using the FastTrack Method Christian Günther, Mirion Technologies (RADOS) GmbH Postersession 10.00 am - 06.00 pm Postersession of all Sessions at the galleries of ICD halls 1-5, restaurant Technical Exhibition 10.00 am - 10.00 pm 14 Accompanying Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer Thursday, March 26, 2015 Session 2: Decommissioning and dismantling of nuclear facilities (Continuation) Plenary Session Session Chairpersons Michael Bächler, E.ON Technologies GmbH Peter Hildwein, NIS Ingenieurgesellschaft mbH 09.30 am (Paper number 007) Immediate or Deferred Decontamination for Decommissioning - Chooz A, KKU, GKN1 and KKI1 - Comparative Experiences Dr. Christian Topf, AREVA GmbH Luis Sempere Belda, AREVA GmbH Michael Fischer, AREVA GmbH et. al. 10.00 am (Paper number 097) Dismantling of SVAFO Research Reactors R2 & R2-0 Uwe Arnold, AREVA GmbH Kjell Westerberg, SVAFO AB 10.30 am (Paper number 056) Fire safety in nuclear power plant dismantling – from KTA to green-field status Michael Klein, E.ON Kernkraft GmbH, Kernkraftwerk Stade Werner Albers, E.ON Kernkraft GmbH, Kernkraftwerk Stade Willy Bartels, KFP Ingenieure Brandschutz GmbH 11.00 am (Paper number 117) Convoy under dismantling – proven practice revived Bernd Kaiser, E.ON Technologies GmbH Michael Bächler, E.ON Technologies GmbH 11.30 am Coffee break 15 Session 2: Decommissioning and dismantling of nuclear facilities (Continuation) Plenary Session Session Chairpersons Michael Bächler, E.ON Technologies GmbH Peter Hildwein, NIS Ingenieurgesellschaft mbH 12.00 am (Paper number 053) Detailed determination of the activation, waste quanitites and dose distribution for the structural materials of a PWR with the deterministic code ATTILA® Dr. Birgit Wortmann, STEAG Energy Services GmbH Arturo Lizón Aguilar, STEAG Energy Services GmbH 12.20 pm 12.40 pm (Paper number 105) Chemical Cleaning capabilities with Liquid Waste treatment per SCWO process Alessandor Oppici, Westinghouse Electric France (Paper number 044) Decontamination of steam generator pipe bundles by means of high-pressure water-jets Holger Sell, RST GmbH Hans Finkenberg, RST GmbH 01.00 pm Lunch break Session 2: Decommissioning and dismantling of nuclear facilities (Continuation) Plenary Session Session Chairpersons 16 Michael Bächler, E.ON Technologies GmbH Peter Hildwein, NIS Ingenieurgesellschaft mbH 02.00 pm (Paper number 058) Remote Controlled Dismantling of Primary Shielding with Prototype Machines in a Compact Sodium Cooled Reactor (KNK) Anja Graf, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH W. Huber, Siempelkamp Nukleartechnik GmbH B. Maile, August Mössner GmbH + Co. KG et. al. 02.30 pm (Paper number 013) Lifting the reactor vessel in the course of the AVR dismantling project Franz-Josef Grouls, AVR GmbH Wilfried Hubrich, AVR GmbH 03.00 pm Coffee break Session 3: Facilities and systems for the conditioning and packaging of operational and decommissioning wastes Plenary Session Session Chairpersons Dr. Thomas Hassel, Leibniz Universität Hannover Dr. Michael Weigl, KIT Karlsruher Institut für Technologie 03.30 pm (Paper number 073) Chamber filtration systems in conditioning and decontamination processes in the operation and dismantling of nuclear plants Anke Seider, Westinghouse Electric Germany GmbH Dr. Sven Siegfried, Altenburger Electronic GmbH Frank Wilmer, Energiewerke Nord GmbH 03.50 pm 17 (Paper number 096) Decommissioning of nuclear NPPs: Local metallic waste optimization Dr. Johannes Fachinger, ALD Vacuum Technologies GmbH Andreas Scheifele, NUKEM Technologies GmbH Dr.-Ing. Lothar Mensching, E.ON Technologies GmbH et. al. 04.10 pm (Paper number 020) - BMBF MAFRO: semi-autonomous manipulator system for decontamination and release measurement of surfaces Patrick Kern, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Baubetrieb (TMB) Prof. Dr.-Ing. Sascha Gentes, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Baubetrieb TMB) Simon Notheis, Karlsruher Institut für Technologie (KIT), Institut für Prozessrechentechnik, Automation und Robotik (IPR) 04.30 pm (Paper number 099) - BMBF Cutting Zircaloy components quickly and safely Hannes Jakob, Leibniz Universität Hannover, Institut für Werkstoffkunde Dr. Thomas Hassel, Leibniz Universität Hannover, Institut für Werkstoffkunde Dr. Harald Bienia, NUKEM Technologies GmbH et. al. 04.50 pm (Paper number 080) - BMBF Virtual engineering techniques in qualification of a novel pipe decontamination process Hendrik Schuck, Karlsruher Institut für Technologie (KIT) Ahmed Stifi, Karlsruher Institut für Technologie (KIT) Prof. Dr. Dr.-Ing. Dr. h. c. Jivka Ovtcharova, Karlsruher Institut für Technologie (KIT) et. al. 05.10 pm 05.30 pm 18 (Paper number 069) - BMBF Development of an automatic wall milling cutter for decontamination concrete surfaces in nuclear plant dismantling Fabian Börsch, Energie Baden-Würtemberg AG (EnBW) Sebastian Hentschel, Karlsruher Institut für Technologie (KIT) Prof. Dr.-Ing. Sascha Gentes, Karlsruher Institut für Technologie (KIT) et. al. (Paper number 008) Measurement techniques for the sorting and characterization of radioactive material in waste treatment centers: actual instrumentations, exisiting problems and outlook to the future Dr. Marina Sokcic-Kostic, NUKEM Technologies Engineering Services F. Langer, NUKEM Technologies Engineering Services Ch. Klein, NUKEM Technologies Engineering Services et. al. 05.50 pm 06.10 pm (Paper number 035) Sorting of mixed historical waste in a hot cell Aliki van Heek, NRG R. Groothuis, NRG B. Janssen, NRG et. al. End of Plenary Session on Thursday KONTEC DIRECT Short technical lectures in word & vision Thursday, March 26, 2015, 11.20 am – 12.30 pm Panel 1 - Session 4 11.20 am (Paper number 077) – Box 61 Subsequent declaration of old EWN waste Dr. Cornelia Rittmeyer, Energiewerke Nord GmbH 10 minutes for rebuilding 11.40 am (Paper number 040) – Box 60 Autoradiographic examination of irradiated reactor graphites Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich 10 minutes for rebuilding noon (Paper number 018) – Box 59 Material characterisation of conditioned waste: Ways to declare problematic material component Christel Herzog, VKTA Dresden 10 minutes for rebuilding 12.20 pm (Paper number 010) – Box 58 Investigations on the chemical composition of radioactive drum-dryer product in a cement-matrix Dr. Henrik Daniels, Forschungszentrum Jülich GmbH Thursday, March 26, 2015, 11.20 am – 11.50 am Panel 2 - Session 1 11.20 am (Paper number 082) – Box 3 - BMBF Determining the activity inventory of bituminized waste Elvira Mesalic, TU München, RCM 19 10 minutes for rebuilding 11.40 am (Paper number 033) – Box 1 Clearance measurements of inaccessible and covered building surfaces in the nuclear power plant Würgassen Dr. Tobias Hein, Brenk Systemplanung GmbH 10 minutes for rebuilding Thursday, March 26, 2015, noon – 12.30 pm Panel 2 - Session 3 noon (Paper number 016) – Box 39 - BMBF Electrochemical oxidation of C-14 – containing liquid organic wastes – a future alternative route to conventional incineration Hans-Jürgen Friedrich, Fraunhofer Gesellschaft/ Institut für Keramische Technologien und Systeme (IKTS), Außenstelle Dresden-Rossendorf 10 minutes for rebuilding 12.20 pm (Paper number 076) – Box 41 Decontamination of liquid radioactive waste by means of inorganic absorber on the example of 137Cs Natalia Trigubowitsch, Forschungszentrum Jülich GmbH Thursday, March 26, 2015, 02.00 pm – 02.30 pm Panel 1 - Session 3 02.00 pm (Paper number 064) – Box 40 Defined removal of reinforced concrete Ulrich Hess, IFW Hannover 10 minutes for rebuilding 02.20 pm (Paper number 095) – Box 42 Laser decontamination of paint coats containing PCB Dr.-Ing. Anton Philipp Anthofer, TU Dresden Thursday, March 26, 2015, 02.00 pm – 02.30 pm Panel 2 - Session 2 02.00 pm (Paper number 006) – Box 23 Adaptation of radiological room air and ex-vent air monitoring to the decommissioning and dismantling phases of nuclear plants Dr. Richard Nakath, IABG mbH 20 10 minutes for rebuilding 02.20 pm (Paper number 014) – Box 24 - BMBF AZURo Research Project – Automatic disassembly of reactor pressure vessel internals by underwater robotic techniques Gunnar Heinzler, AREVA GmbH Thursday, March 26, 2015, 03.40 pm – 04.10 pm Panel 1 - Session 2 03.40 pm (Paper number 060) – Box 25 Virtual test rig supporting remote dismantling of the Karlsruhe Vitrification Plant (VEK) Wolfgang Metzger, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH 10 minutes for rebuilding 04.00 pm (Paper number 106) - Box 26 Supplementary requirements: basic principles – assessment – documentation – preparation in nuclear plant dismantling Nils Warning, BARTSCH WARNING PARTNERSCHAFT Thursday, March 26, 2015, 03.40 pm – 04.10 pm Panel 2 - Session 1 03.40 pm (Paper number 034) – Box 4 In-situ clearance of large components as demonstrated by the example of the cranes in the KWW power house Bastian Degner, Brenk Systemplanung GmbH 10 minutes for rebuilding 04.00 pm (Paper number 118) – Box 2 Reduction of false alarms in portal monitors by using the FastTrack Method Christian Günther, Mirion Technologies (RADOS) GmbH Postersession 09.00 am - 06.00 pm Postersession of all Sessions at the galleries of ICD halls 1-5, restaurant Technical Exhibition 09.00 am - 06.00 pm Accompanying Technical Exhibition in the ICD halls 1-5, restaurant 08.00 pm 21 Special evening event „KONTEC 2015 Banquet“ in the ICD Friday, March 27, 2015 Session 4: Transport, interim and final storage of non-heat generating wastes Plenary Session Session Chairpersons Dr. Heinz Geiser, GNS Gesellschaft für Nuklear-Service mbH Olaf Oldiges, DAHER-NCS 09.00 am (Paper number 049 + 050) The GNS waste containers – from type testing to assembly Dr. Ulrich Knopp, GNS Gesellschaft für Nuklear-Service mbH Rolf Gieselmann, GNS Gesellschaft für Nuklear-Service mbH Dr. Linus Bettermann, GNS Gesellschaft für Nuklear-Service mbH 09.20 am (Paper number 094) Licensing old containers – the lost concrete shield (VBA) Jörg Melzer, Wiederaufarbeitungsanlage Karlsruhe Rückbauund Entsorgungs-GmbH Tschan, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH Bayiha, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH 09.40 am (Paper number 090) Precise formulation of inspection requirements for steel sheet containers for the Konrad Repository Matthias Dittrich, BAM Bundesanstalt für Materialforschung und –prüfung Dr. Eva Kasparek, BAM Bundesanstalt für Materialforschung und –prüfung Dr. Holger Völzke, BAM Bundesanstalt für Materialforschung und –prüfung et. al. 10.00 am (Paper number 011) Five years of Material Characterization of Jülich Waste Dr. Thorsten Steinhardt, Forschungszentrum Jülich GmbH H. Daniels, Forschungszentrum Jülich GmbH Bastian Niedrée, Forschungszentrum Jülich GmbH et. al. 22 10.20 am (Paper number 101) Experience in recording and checking the composition of radioactive waste materials Stefan Steyer, BfS Bundesamt für Strahlenschutz Karin Kugel, BfS Bundesamt für Strahlenschutz Dr. Detlev Gründler, ISTec GmbH et. al. 10.40 am Coffee break Session 4: Transport, interim and final storage of non-heat generating wastes (Continuation) Plenary Session Session Chairpersons Dr. Heinz Geiser, GNS Gesellschaft für Nuklear-Service mbH Olaf Oldiges, DAHER-NCS 11.10 am (Paper number 091) What services does EWN – in his role as Konrad Coordination Unit – provide for the publilc funded waste producers? Carola Dominke-Bendix, Energiewerke Nord GmbH, Betriesbstätte Karlsruhe Iris Graffunder, Energiewerke Nord GmbH, Betriesbstätte Karlsruhe Dr. Christoph Wunn, admoVa Consulting GmbH 11.30 am 11.50 am 23 (Paper number 107) Costs to be borne by the public sector for the disposal of radioactive waste with negligible heat generation Dr. Frank Peiffer, Gesellschaft für Anlagen- und Reaktosicherheit (GRS) mbH Brigitta McStocker, Gesellschaft für Anlagen- und Reaktosicherheit (GRS) mbH (Paper number 098) Annual stocktaking by BfS of radioactive waste – yesterday, today, tomorrow Markus R. Schmidt, Bundesamt für Strahlenschutz BfS 12.10 pm 12.30 pm 01.00 pm (Paper number 054) Interim storage for radioactive waste Roger Vallentin, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH M. Baumann, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH Hans-Jürgen Blenski, GNS Gesellschaft für Nuklear-Service mbH Conclusion and Awards for the Best 2015 Plenary, Poster and KONTEC DIRECT Short technical lecture Michael Szukala, Chairman of KONTEC Programm Comittee End of Plenary Sessions Postersession 09.00 am - 01.00 pm Postersession of all Sessions at the galleries of ICD halls 1-5, restaurant Technical Exhibition 09.00 am - 01.00 pm Accompanying Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer 01.00 pm End of the Conference 24 Postersessions Sessions 1-4 at the galleries of ICD halls 1-5, restaurant and hall foyer March 25, 2015 March 26, 2015 March 27, 2015 Session 1 Box 1: (Paper number 033) (also as KONTEC DIRECT short lecture) Clearance measurements of inaccessible and covered building surfaces in the nuclear power plant Würgassen Dr. Tobias Hein, Brenk Systemplanung GmbH Lars Hauke Wiese, E.ON Kernkraft GmbH, Kernkraftwerk Würgassen Alexander Kummer, Brenk Systemplanung GmbH et. al. Box 2: 10.00 am – 06.00 pm 09.00 am – 06.00 pm 09.00 am – 01.00 pm (Paper number 118) (also as KONTEC DIRECT short lecture) Reduction of false alarms in portal monitors by using the FastTrack Method Christian Günther, Mirion Technologies (RADOS) GmbH Box 3: (Paper number 082) - BMBF (also as KONTEC DIRECT short lecture) Determining the activity inventory of bituminized waste Elvira Mesalic, TU München, Radiochemie München (RCM) F. Kortmann, TU München, Radiochemie München (RCM) Dr. Christoph Lierse von Gostomski, TU München, Radiochemie München (RCM) Box 4: (Paper number 034) (also as KONTEC DIRECT short lecture) In-situ clearance of large components as demonstrated by the example of the cranes in the KWW power house Bastian Degner, Brenk Systemplanung GmbH Ralf Wolff, E.ON Kernkraft GmbH, Kernkraftwerk Würgassen Alexander Kummer, Brenk Systemplanung GmbH et. al. 25 Box 5: Box 6: (Paper number 001) Modelling of physico-chemical characteristics of concretewaste composites in radioactive waste management Dr. Ilja Plecas, University of Belgrade, Institute of Nuclear Sciences - Vinca Dalibor Arbutina, Nuclear Facilities of Serbia (Paper number 009) Reduction of the quantity of solid radioactive waste to be finally disposed, by means of decontamination Norbert Kosa, MVM Paks Nuclear Power Plant Ltd. J. Schunk, MVM Paks II. Ltd. Z. László, Hepenix Ltd. et. al. (Paper number 012) Application of algorithms for solving the bin-packing problem to a current core waste disposal campaign to minimise the number of required casks Dr. Philip Harding, Brenk Systemplanung GmbH Jörg Radzuweit, GNS Gesellschaft für Nuklear-Service mbH Andreas Friske, GNS Gesellschaft für Nuklear-Service mbH Box 8: (Paper number 021) Restricted clearance - Barriers in the view of waste regulations Dr. Petra Steinbach, VKTA Dresden Sven Jansen, VKTA Dresden Ricarda Langer, VKTA Dresden Box 9: (Paper number 022) Clearance of Activated Components by a Combination of Different Measuring Methods Sven Jansen, VKTA Dresden Box 7: Box 10: 26 (Paper number 023) Effective and efficient disposal of activated/ contaminated core components Ralf Cleve, GNS Gesellschaft für Nuklear-Service mbH Detlef Jung, EnBW, Kernkraftwerk Neckarwestheim Thomas Frerichs, E.ON Kernkraft GmbH, Kernkraftwerk Unterweser et. al. Box 11: Box 12: Box 13: Box 14: Box 15: Box 16: 27 (Paper number 024) Optimizing the RAW Management in Ukraine Dr. Hagen Gunther Jung, NUKEM Technologies Engineering Services K. Büttner, NUKEM Technologies Engineering Services Dr. Marina Sokcic-Kostic, NUKEM Technologies Engineering Services et. al. (Paper number 026) Construction and some first operating experience of a big ultrasound trough for cleaning large plant components Thomas Janssen, Forschungszentrum Jülich GmbH Helmut Reisen, Forschungszentrum Jülich GmbH Dr. Guido Caspary, Forschungszentrum Jülich GmbH (Paper number 027) Estimating measurement uncertainties for application of DIN ISO 11929 Matthias Bothe, VKTA Rossendorf e. V. (Paper number 028) Plutonium dominated nuclide vectors – A difficult task for clearance measurements Matthias Bothe, VKTA Rossendorf e. V. Jean-Marie Cuchet, Belgonucléaire Dessel Henri Libon, Belgonucléaire Dessel et. al. (Paper number 043) Operational experience with the FAME II drum measuring system André Henning, GNS Gesellschaft für Nuklear-Service mbH Hans-Heinrich Westermann, GNS Gesellschaft für Nuklear-Service mbH (Paper number 071) Disposal-oriented conditioning of Co-60 contaminated consumer products Robert Schulze, Nuclear Control & Consulting GmbH Ralf Zilezinski, Gamma-Service Recycling GmbH Box 17: (Paper number 074) - BMBF Using granular abrasive from nuclear dismantling to produce packing concrete Sören Stiefel, Karlsruher Institut für Technologie (KIT) M. Haist, Karlsruher Institut für Technologie (KIT) J.-D. Eckhardt, Karlsruher Institut für Technologie (KIT) et. al. (Paper number 075) - BMBF Development of a separation technique for treating secondary waste from water abrasive suspension cutting Martin Brandauer, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Baubetrieb, Abteilung Rückbau kerntechnischer Anlagen Prof. Dr.-Ing. Sascha Gentes, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Baubetrieb, Abteilung Rückbau kerntechnischer Anlagen Prof. Dr.-Ing. Jörg Starflinger, Universität Stuttgart Box 19: (Paper number 084) Evaluation of a procedure for energy-selective beta detection Erik Kisant, Forschungszentrum Jülich GmbH T. Steinhardt, Forschungszentrum Jülich GmbH Dr. Guido Caspary, Forschungszentrum Jülich GmbH et. al. Box 20: (Paper number 088) Treatment, characterization and disposal of historical waste: experience with the decommissioning of the 600 MeV Synchro-Cyclotron at CERN Francesco La Torre, CERN Matteo Magistris, CERN Régis Michaud, CERN et. al. Box 18: Box 21: 28 (Paper number 103) Planning and construction of a Supercompactor system for Nuclear Engineering Seibersdorf Klaus Krist, Westinghouse Electric Germany GmbH Anton Kastner, Westinghouse Electric Germany GmbH (Paper number 115) Classification of the GRR-1 components for costing the decommissioning Dr. Anastasia Savidou, Radioactive Materials Management Laboratory (RMML), INFRASTES, NCSR “Demokritos” George Katsoulas, Institute of Nuclear & Radiological Sciences & Technology, Energy and Safety National Centre for Scientific Research “Demokritos” Ioannis Gikas, Institute of Nuclear & Radiological Sciences & Technology, Energy and Safety National Centre for Scientific Research “Demokritos” et. al. Session 2 Box 23: (Paper number 006) (also as KONTEC DIRECT short lecture) Adaptation of radiological ambient and exhaust air monitoring systems to the decommissioning and dismantling phases of nuclear installations Dr. Richard Nakath, IABG mbH Iris Ritzerfeld, Caverion Deutschland GmbH Box 22: Box 24: Box 25: 29 (Paper number 014) - BMBF (also as KONTEC DIRECT short lecture) AZURo Research Project – Automatic disassembly of reactor pressure vessel internals by underwater robotic techniques Gunnar Heinzler, AREVA GmbH (Paper number 060) (also as KONTEC DIRECT short lecture) Virtual test rig supporting remote dismantling of the Karlsruhe Vitrification Plant (VEK) Wolfgang Metzger, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH Christian Held, Wiederaufarbeitungsanlage Karlsruhe Rückbauund Entsorgungs-GmbH Timo Liedtke, Wiederaufarbeitungsanlage Karlsruhe Rückbauund Entsorgungs-GmbH Box 26: Box 27: (Paper number 106) (also as KONTEC DIRECT short lecture) Supplementary requirements: basic principles – assessment – documentation – preparation in nuclear plant dismantling Nils Warning, BARTSCH WARNING PARTNERSCHAFT, Ingenieurbüro für Baubetrieb und Bauwirtschaft Dr. Ralph H. Bartsch, Prof. Dr.-Ing. Sascha Gentes, Technologie und Management des Rückbaus kerntechnischer Anlagen, KIT (Paper number 003) Generic Study of the Correlation between Contamination of Primary Circuit Media and the Occupational Radiation Dose for Nuclear Power Plants with Pressurized Water Reactors Dr. Sebastian Schneider, Gesellschaft für Anlagen- und Reaktosicherheit (GRS) mbH Dr. Andreas Artmann, Gesellschaft für Anlagen- und Reaktosicherheit (GRS) mbH Dr. Gerd Bruhn, Gesellschaft für Anlagen- und Reaktosicherheit (GRS) mbH Box 28: (Paper number 042) Remote Dismantling of the RPV Insulation at Obrigheim NPP Ralf Borchardt, Energiewerke Nord GmbH Edgar Kelling, Energiewerke Nord GmbH Heiko Schaphorst, Energiewerke Nord GmbH Box 29: (Paper number 045) - BMBF Technical, economic, social and political consequences of the dismantling of a nuclear power plant on regional and local levels (FoRK) Simon Kretz, Lehrstuhl Humangeographie, KIT Prof. Dr. Caroline Kramer, Lehrstuhl Humangeographie, KIT Prof. Dr.-Ing. Sascha Gentes, Technologie und Management des Rückbaus kerntechnischer Anlagen, KIT et. al. Box 30: 30 (Paper number 046) Planning and monitoring the building structural calculations for decontamination and demolition work Jörg Möller, Energiewerke Nord GmbH, Betriebsteil KKW Rheinsberg Box 31: Box 32: (Paper number 059) Adapting the concept of dismantling of the biological shield of KNK Stefan Rothschmitt, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH Anja Graf, Wiederaufarbeitungsanlage Karlsruhe Rückbau- und Entsorgungs-GmbH (Paper number 061) Radiological Characterization and Decommissioning of Research and Power Reactors Artur Sperling, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität Faezeh Abbasi, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität R. Nabbi, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität (Paper number 062) Process structure as a basis for the planning stage of project management for the decommissioning of nuclear facilites Felix Hübner, Karlsruher Institut für Technologie (KIT), Institut für Industriebetriebslehre und Industrielle Produktion (IIP) Octay Secer, Karlsruher Institut für Technologie (KIT), Institut für Technologie und Management im Baubetrieb (TMB) Prof. Dr.-Ing. Sascha Gentes, Technologie und Management des Rückbaus kerntechnischer Anlagen, KIT et. al. Box 34: (Paper number 065) Status of the dismantling project FRJ-2 Willy Dohmen, Forschungszentrum Jülich GmbH G. Damm, Forschungszentrum Jülich GmbH Rudolf Printz, Forschungzentrum Jülich GmbH et. al. Box 35: (Paper number 067) Dismantling ‘hot cells’ in the chemical cells of the Jülich Research Centre - How 1.200 Mg barite concrete enters the economic circuit Doris Bensch, Forschungszentrum Jülich GmbH P. Pracht, Forschungszentrum Jülich GmbH Rudolf Printz, Forschungszentrum Jülich GmbH et. al. Box 33: 31 Box 36: (Paper number 070) Assessment of acitivity inventories at decommissioning for Swedish nuclear power plants Dr. Mattias Viertel, Studsvik GmbH & Co. KG Klas Lundgren, Studsvik Nuclear AB (Paper number 083) Construction planning by a 3D CAD model in dismantling nuclear plants Mark Kritzmann, HOCHTIEF Engineering GmbH Frank Schulze, HOCHTIEF Engineering GmbH Rüdiger Holtkamp, HOCHTIEF Engineering GmbH et. al. Box 38: (Paper number 085) Decontamination of Philippsburg Unit 1 Marc Brenneisen, Westinghouse Electric Germany GmbH Session 3 Box 39: (Paper number 016) - BMBF (also as KONTEC DIRECT short lecture) Electrochemical oxidation of C-14 –containing liquid organic wastes – a future alternative route to conventional incineration Hans-Jürgen Friedrich, Fraunhofer Gesellschaft/ Institut für Keramische Technologien und Systeme (IKTS), Außenstelle Dresden-Rossendorf W. Müller, IUT GmbH Berlin R. Knappik, VKTA Rossendorf e. V. Box 40: (Paper number 064) (also as KONTEC DIRECT short lecture) Defined removal of reinforced concrete Ulrich Hess, Leibniz Universität Hannover, IFW D. Engelmann, Karlsruher Institut für Technologie KIT C. Heise, Herrenknecht AG et. al. Box 41: (Paper number 076) (also as KONTEC DIRECT short lecture) Decontamination of liquid radioactive waste by means of inorganic absorber on the example of 137Cs Natalia Trigubowitsch, Forschungszentrum Jülich GmbH Dr. Adamovich, FSUE Radon Dr. Milyutin, Russian Academy of Science et. al. Box 37: 32 Box 42: Box 43: (Paper number 095) (also as KONTEC DIRECT short lecture) Laser decontamination of paint coats containing PCB Dr.-Ing. Anton Philipp Anthofer, TU Dresden, Fakultät Maschinenwesen, Institut für Energietechnik, Professur für Wasserstoffund Kernenergietechnik O. Peise, Karlsruher Institut für Technologie KIT, Engler-Bunte-Institut, Bereich Verbrennung D. Trimis, Technische Universität Bergakademie Freiberg, Institut für Wärmetechnik und Thermodynamik et. al. (Paper number 004) Recycling of rare metals from decommissioning of nuclear facilities Jan Philipp Dabruck, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität Dr. Frank Charlier, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität Christian Büttner, NET - Institut für Nukleare Entsorgung und Techniktransfer der RWTH Aachen Universität Box 44: (Paper number 005) Determining the Void Volume of Drums Dr. Bastian Niedrée, Forschungszentrum Jülich GmbH Stefan Rosenzweig, Forschungszentrum Jülich GmbH Dr. Thorsten Steinhardt, Forschungszentrum Jülich GmbH et. al. Box 45: (Paper number 017) Waste sorting in conjunction with decommissioning and treatment with a view to later classification of the radioactive waste into waste form groups in accordance with the waste acceptance requirements Sabine Fleck, VKTA Dresden Gregor Beger, VKTA Dresden Thomas Grahnert, VKTA Dresden Box 46: 33 (Paper number 029) Disposal of Ion Exchange Resins from the Petten Research Reactor Renate De Vos, NRG Box 47: Box 48: (Paper number 030) High Performance Wall Grinding System for Decontamination of Large Areas - Cost Efficiency in Decommissioning by Standard Methods of Diamond Technology Dr. Martin Gödickemeier, Hilti AG E. Siegenthaler, Hilti AG J. Lauwers, Hilti AG (Paper number 037) Treatment of Low and Intermediate Level Wastes by Microplasma Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich (Paper number 038) Chemical and Radiometrical Investigations of the Deposits in Oil and Gas Pipes Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich E. Lichte, FH Aachen Campus Jülich F. Schneider, FH Aachen Campus Jülich Box 50: (Paper number 039) Surface Decontamination using a Microplasma Torch Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich E. Lichte, FH Aachen Campus Jülich F. Schneider, FH Aachen Campus Jülich Box 51: (Paper number 051) High force compaction to minimize low and intermediate level waste Wolfgang Mützel, Babcock Noell GmbH Stefan Ackermann, Babcock Noell GmbH Box 49: Box 52: 34 (Paper number 068) As Stone and iron break – Baptism of fire of a concrete conditioning plant in processing segments of steel reinforced concrete Stephan Werbelow, Forschungszentrum Jülich GmbH Burkhard Stahn, Forschungszentrum Jülich GmbH Rudolf Printz, Forschungszentrum Jülich GmbH et. al. Box 53: Box 54: Box 55: Box 56: Box 57: 35 (Paper number 081) PHADECTM- Flowsheet simplification of a chemical decontamination process Gerd Edler, Babcock Noell GmbH (Paper number 092) The Future Storage, Treatment and Packaging Facilities for Radioactive Waste at CERN Luca Bruno, CERN Werner Lins, Kraftanlagen Heidelberg GmbH Dr. Matthias Bauerfeind, TÜV SÜD Energietechnik GmbH Baden-Würtemberg et. al. (Paper number 093) Restoration of the MAW scrapping plant of WAK GmbH, HDB Frank Blase, Wiederaufarbeitungsanlage Karlsruhe Rückbauund Entsorgungs-GmbH Ronny Kern, Wiederaufarbeitungsanlage Karlsruhe Rückbauund Entsorgungs-GmbH (Paper number 102) The evaluation of non-gamma emitters in the radiological characterization of potentially radioactive electrical cables from CERN Nick Walter, CERN, DGS-RP Group Bertrand Cellerier, CERN, DGS-RP Group Matteo Magistris, CERN, DGS-RP Group et. al. (Paper number 114) Disposal of mineral waste from the dismantling of radioactive plants Hedjeh Emami-Far, Karlsruher Institut für Technologie (KIT) Prof. Dr.-Ing. Sascha Gentes, Karlsruher Institut für Technologie (KIT) Stephan Haupental, Remex Conmin GmbH Session 4 Box 58: (Paper number 010) (also as KONTEC DIRECT short lecture) Investigations on the chemical composition of radioactive drum-dryer product in a cement-matrix Dr. Henrik Daniels, Forschungszentrum Jülich GmbH Carsten Kalitz, Forschungszentrum Jülich GmbH Dr. Thorsten Steinhardt, Forschungszentrum Jülich GmbH et. al. (Paper number 018) (also as KONTEC DIRECT short lecture) Material characterisation of conditioned waste: Ways to declare problematic material components Christel Herzog, VKTA Dresden Sabine Fleck, VKTA Dresden Dr. Petra Steinbach, VKTA Dresden et. al. Box 60: (Paper number 040) (also as KONTEC DIRECT short lecture) Autoradiographic examination of irradiated reactor graphites Prof. Dr. Ulrich W. Scherer, FH Aachen Campus Jülich M. Baier, FH Aachen Campus Jülich S. Gosh, FH Aachen Campus Jülich et. al. Box 61: (Paper number 077) (also as KONTEC DIRECT short lecture) Subsequent declaration of old EWN waste Dr. Cornelia Rittmeyer, Energiewerke Nord GmbH Klaus Borchardt, Energiewerke Nord GmbH Hans Jurzok, Energiewerke Nord GmbH et. al. Box 62: (Paper number 041) Status of institutional waste disposal, re-licensing and safety – The Czech Republic Case Sona Konopásková, RAWRA Iva Zadáková, RAWRA Box 59: 36 Box 63: Box 64: (Paper number 055) Mechanical Verifications for the Qualifications of Reactor Pressure Vessels and Steam Generators as IP-2-Packages Günther Neumann, WTI Wissenschaftlich-Technische Ingenieurberatung GmbH B. Olm, Energiewerke Nord GmbH F. Hilbert, Nuclear Cargo + Service GmbH (Paper number 089) Radionuclides in groundwater: (micro)biology and (hydro) geology (TransAqua) Prof. Dr. Erika Kothe/ Katja Burow, Friedrich Schiller Universität Jena Sven Gärnter, Friedrich Schiller Universität Jena Dr. Anja Grawunder, Friedrich Schiller Universität Jena et. al. Box 65: (Paper number 108) Security concepts for LAW and MAW storage facilities Markus Esch, Westinghouse Electric Germany GmbH Martin Reingardt, Westinghouse Electric Germany GmbH Andreas Diwes, Westinghouse Electric Germany GmbH et.al. Box 66: (Paper number 112) Novel casks for shipping and/ or storing materials hazardous to the environment Edith Zimmermann, iKTZ - innovative Klebtechnik Zimmermann Technical Exhibition in the ICD halls 1-5, restaurant and hall foyer March 25, 2015 March 26, 2015 March 27, 2015 37 10.00 am – 10.00 pm 09.00 am – 06.00 pm 09.00 am – 01.00 pm Exhibitors 38 Company booth no. ABREX Geräte und Anlagenbau GmbH F-4 AKB Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH S4b Alpin Technik und Ingenieurservice GmbH S4e ANT Applied New Technologies GmbH A-5 AREVAH-3 August Alborn GmbH & Co. KG S4a AVR GmbH C-2 Babcock Noell GmbH F-1 Baltic Scientific Instruments, Ltd. S4c BERTHOLD TECHNOLOGIES GmbH & Co. KG S4d BIG Entsorgungstechnologien GmbH D-6 Brenk Systemplanung GmbH M-2 BROKK AB E-2 Container d.o.o. Slowenien G-1 CONTEC GmbH E-8 DAHER-NCSG-3 DARDA GmbH E-2 DBE TECHNOLOGY GmbH G-4 Delta-Vertrieb GmbH D-4 DREHTAINER GmbH K-7 E.ON Anlagenservice GmbH H-6 E.ON Technologies GmbH H-6 Eckert & Ziegler Umweltdienste GmbH D-2 Eisenwerk Bassum mbH D-9 EnergySolutions EU Limited D-8 EWN GmbH C-2 Forschungszentrum Jülich GmbH H-1 Gamma-Service Recycling GmbH S8 GNS Gesellschaft für Nuklear-Service mbH E-4 GRADEL SARL K-6 HILTI AG S3 HOCHTIEF Solutions AG E-3 IABG Industrieanlagen - Betriebsgesellschaft mbH E-5 Institut für Werkstoffkunde der Uni Hannover E-1 JL Goslar GmbH S7a KAH Kraftanlagen Heidelberg GmbH D-5 KIT-PTKA (BMBF) G-2 Kjellberg Finsterwalde GmbH E-1 KWS Kraftwerksschule e.V. G-6 Maschinen-Meyer GmbH & Co KG A-2 Mirion Technologies (Rados) GmbH D-7 MTH Metall-Technik-Halsbrücke GmbH & Co. KG M-1 Multi-Contact Deutschland GmbH E-7 NPO EUROPE S5b Company booth no. NRG K3 NucTecSolutions GmbH D-10 NUKEM Technologies GmbH C-1 Pedi AG A-1 POLIGRAT GmbH K4 RÖHR + STOLBERG GmbH D-3 Rotan GmbH G-5 RST GmbH F-4 S.E.A. GmbH H-5 SAFETEC ENTSORGUNGS- UND SICHERHEITSTECHNIK GMBHH-6 sat. Kerntechnik GmbH E-6 SNT Siempelkamp Nukleartechnik GmbH F-3 Stäubli Tec-Systems GmbH E-7 STEAG Energy Services GmbH F-5 StudsvikB-2 TB-Safety GmbH K5 TÜV NORD EnSys GmbH & Co. KG A-3 TÜV NORD SysTec GmbH & Co. KG A-3 TÜV Rheinland Industrie Service GmbH S6 TÜV SÜD Industrie Service GmbH H-2 Tyrolit GmbH S7b UniTech Services GmbH F-2 VKTA Dresden D-1 Voith Industrial Services Energy GmbH & Co. KG A-4 Wälischmiller Engineering GmbH H-4 WAK GmbH C-2 Westinghouse Electric Germany GmbH B-1 WIKUS - Sägenfabrik Wilhelm H. Kullmann GmbH & Co. KGS5a atm Gesellschaft für aktives technisches Marketing GmbH Willhoop 2 · D 22453 Hamburg, Germany Tel. +49/40/ 228 13 77 90 · Fax +49/40/ 228 13 77 99 for: KONTEC Gesellschaft für technische Kommunikation mbH 39 www.KONTEC2015.de Email: [email protected]
© Copyright 2024 ExpyDoc