CABLINE -UA ll ® 0.3mmᴾἦἕἓẅἻỶἚỴὅἂἽ਴৷ᴾᵍᴾἋἑἕỿὅἂ‫׹‬ᴾ Ṳᴾɭမஇ‫ݱ‬ἁἻἋỉἋἼἲἑỶἩỂẆ ẅẅἅ἟ἁἑኽዴࢸỉኬࢲἤὅἊᡫẲầӧᏡ Ṳᴾߓӳ᭗Ằᾉ1.27mm ṲᴾᢘӳἃὊἨἽᾉSGC AWG#46, AWG#44, AWG#42ᵆኬࢲᵇ Ṳᴾࡴᅈ཯ᐯỉW-PointἅὅἑἁἚನᡯỆợụ ẅẅ᭗੗ᚑࣱ̮᫂ửܱྵ Ṳᴾ‫ٶ‬ໜGNDನᡯỆợụ‫ܭܤ‬ẲẺἂἻὅἛཎࣱửᄩ̬ ṲᴾἏἽἒἼὅἂኽዴ Ẕἅ἟ἁἑᑵૠẕ ẔᢘӳἃὊἨἽἇỶἌẕ 26p, 32p, 40p, 50p AWG #42(⣽ᚄ #44, #46 SGC ẔᙌԼ‫׹‬ဪẕ ἩἻἂẅἅ἟ἁἑἍἕἚίἃὊἨἽͨὸ ᢿԼನ঺ẅίἡỸἊὅἂὸ 20497- 0 䢬䢬 T - 䢬䢢䢲 ䷵ ᑵẅૠ ䷶ ఻ẅѼ T 儬児儈 ䷷ Metal Cover Plating 0 for Au plating 2 for Sn plating 00 Au 10 Sn ䷵ ䷶ ䷷ ䷸ ᢿԼನ঺ẅίἳἑἽỽἢὊὸ ἳἑἽỽἢὊ ἳἕỿϼྸ 26: 26pos 32: 32pos 40: 40pos 50: 50pos 2679-0 䢬䢬 - ䷵ ䷸ ἾἍἩἑἁἽẅἅ἟ἁἑἍἕἚίؕெͨὸ ䷵ ᑵẅૠ ䷶ ఻ẅѼ E 儌兗兀儝優兠儻 ䷷ SHELL Plating 3 Au 4 Sn VACUUM CLIP 0 Without 1 With 20498- 0 䢬䢬 E - 䢬䢢䢬 ䷵ ䷶ ䷷䷸ ䷸ 26: 26pos 32: 32pos 40: 40pos 50: 50pos Ẕਖ਼‫׹ڜ‬ဪẕ POS. HOUSING Metal Cover PLUG Connector Set RECEPTACLE 26 20497-026T-20 2679-026-10 20496-026-20 20498-026E-41 32 20497-032T-20 2679-032-10 20496-032-20 20498-032E-41 40 50 20497-040T-20 20497-050T-20 2679-040-10 2679-050-10 20496-040-20 20496-050-20 20498-040E-41 20498-050E-41 2014/09R6 ® CABLINE -UA ll PLUG POS. 26p 32p 40p 50p 償儧儬ရ␒凬20496-0䢬䢬䢯䢬䢬 A A 12.8 14.6 17.0 20.0 0.2 B 3.6 4.5 5.7 7.2 C 8.1 9.9 12.3 15.3 D 9.6 11.4 13.8 16.8 1.14 Material / Finish HOUSING CONTACT SHELL METAL COVER 1.25 1.6 Metal Cover LCP UL94V-0 COPPER ALLOY COPPER ALLOY STAINLESS STEEL BLACK Au Au or Ni Au or Sn Housing 0.3 B B Pos.n 2.9 0.35 0.23 0.86 Pos.1 1.27 C D RECEPTACLE POS. 26p 32p 40p 50p MATED VIEW Part NO. 20498-026E- 20498-032E- 20498-040E- 20498-050E- A 12.4 14.2 16.6 19.6 B 10.8 12.6 15.0 18.0 C 8.1 9.9 12.3 15.3 D 3.6 4.5 5.7 7.2 Material / Finish HOUSING LCP UL94V-0 BLACK CONTACT COPPER ALLOY Au SHELL COPPER ALLOY Au or Sn 0.5 s0.02 A B C Pos.1 C Pos. n/2 Pos. n/2+1 Pos.n-1 D D 0. 2 0.15s0.03 0.15s0.03 0.6 GND GND Pos. n/2+1 P Pos. n/2 0.15s0.03 2.9 0.15s0.03 32p, 40p 34p, 50p Detail.Q 0.8 0.3 0.2 Pos.n 1.27 Pos.2 2.65 2.9 0.15 Pos. n/2 C s0.03 0.4 0.15 Pos.1 Pos. n/2+1 D s0.03 0.3 s0.03 0.3 s0.02 Pos.n-1 1.2 s0.02 32p, 40p Pos.2 0.6 s0.03 34p, 50p Detail.P Q Pos.n B s0.03 RECOMMENDED FOOTPRINT PATTERN 0.8 s0.03 Pos. n/2+1 1.84 s0.05 0.15 0.15 0.8 s0.03 GND GND Pos. n/2 D s0.03