No-Hub Pipe and Fittings Service Pipe and Fittings

DIMENSIONAL CATALOG
No-Hub Pipe and Fittings
Service Pipe and Fittings
Cast Iron
Extra Heavy Pipe and Fittings
DC-CI
Plugs
(Updated December 9, 2014)
© 1977-2014 Charlotte Pipe and Foundry Company
Cast Iron Pipe and Fitting Dimensions
Table of Contents
Page
No-Hub Pipe Dimensions......................................... 3-4
No-Hub Fitting Dimensions.................................... 4-43
No-Hub Starter Fitting Detail Drawings............... 44-50
Service Pipe Dimensions...................................... 51-53
Service Fitting Dimensions................................ 54-102
Extra Heavy Pipe Dimensions.......................... 103-105
Extra Heavy Fitting Dimensions....................... 106-119
Plug Dimensions..................................................... 120
Certification........................................................... 121
Warranty............................................................... 123
Download our Tech Tools App for dimensional
info, tech calculators and more on your
mobile device.
Charlotte Pipe and “You can’t beat the system” are registered trademarks of
Charlotte Pipe and Foundry Company.
No-Hub
TABLE 1
DIMENSIONS AND TOLERANCES (IN INCHES) OF SPIGOTS
AND BARRELS FOR NO-HUB PIPE AND FITTINGS
Inside
Outside
Outside Width ThicknessGasket
Barrel
Diameter DiameterSpigot
of Positioning
Diameter Barrel
SpigotBead Barrel Lug
SizeN
B
J
M
(± .13) T-Nom. T-Min.
W
1 ⁄2 1.50 ± .09 1.90 ± .06 1.96 ± .06
2 1.96 ± .09 2.35 ± .09 2.41 ± .09
3 2.96 ± .09 3.35 ± .09 3.41 ± .09
4 3.94 ± .09 4.38 + .09 4.44 ± .09
– .05
5 4.94 ± .09 5.30 + .09 5.36 ± .09
– .05
6 5.94 ± .09 6.30 + .09 6.36 ± .09
– .05
8 7.94 ± .13 8.38 ± .09 8.44 ± .09
10 10.00 ± .13 10.56 ± .09 10.62 ± .09
12 11.94 ± .09 12.50 ± .13 12.62 ± .13
15 15.11 ± .09 15.83 ± .13 16.12 ± .13
1
.25
.25
.25
.31
.16
.16
.16
.19
.13
.13
.13
.15
1.13
1.13
1.13
1.13
.31 .19
.15
1.50
.31 .19
.15
1.50
.31
.31
.31
.31
.17
.22
.22
.30
2.00
2.00
2.75
2.75
.23
.28
.28
.36
TEN FOOT PIPE BUNDLES
NO-HUB PIPE
Size
Pieces
11⁄2” x 10’72
2” x 10’54
3” x 10’36
4” x 10’27
5” x 10’24
6” x 10’18
8” x 10’8
10” x 10’6
12” x 10’6
15” x 10’2
Weight
2052 12”
1906 11”
1944 14”
1922 17”
2342 20”
2120 23”
136722”
1528 26”
1908 29”
985 19”
Weights are approximate and are for shipping purposes only.
3
Height
No-Hub Pipe and Fittings
PART NO. NH 1
No-Hub Coupling
Size
Shield Width
Number
of Clamps
1 ⁄22.13”2
2 x 11⁄22.13”2
2
2.13”2
3 x 2
2.13”2
3
2.13”2
4 x 3
2.13”2
4
2.13”2
5
3.00”4
6
3.00”4
8
4.00”4
10
4.00”4
1
PART NO. SD 4
Heavy Duty Coupling
Size
Shield Width
Number
of Clamps
11⁄23.00”4
2
3.00”4
3
3.00”4
4
3.00”4
5
4.00”6
6
4.00”6
8
4.00”6
10
4.00”6
12
5.50”6
15
5.50”6
4
No-Hub Pipe and Fittings
PART NO. NH 2
No-Hub Pipe - Ten Feet Laying Length
Size
Weight
1 ⁄2” x 10’28.5
2” x 10’37.1
3” x 10’54.0
4” x 10’71.2
5” x 10’97.6
6” x 10’117.8
8” x 10’170.9
10” x 10’254.6
12” x 10’318.1
15” x 10’492.6
1
PART NO. NH 4
Quarter Bend
Size
D
Weight
11⁄241⁄41.7
2
41⁄22.2
3
5
3.7
4
51⁄26.5
5
61⁄29.3
6
7
13.4
8
81⁄223.1
4 x 3
51⁄25.5
Long Quarter Bend
Size
D
12
18
24
12
12
2 x 12
2 x 18
2 x 24
3 x 12
4 x 12
E
Weight
41⁄25.4
41⁄28.8
41⁄210.7
5
8.5
51⁄211.2
5
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 4A
Tapped Quarter Bend
Size
D
E
Weight
11⁄2 x 11⁄23
2 1.9
2 x 11⁄431⁄421⁄42.0
2 x 11⁄231⁄421⁄41.8
2 x 2
31⁄421⁄42.9
PART NO. NH 6
Quarter Bend with Side Opening
Size
3 x 2
4 x 2
E
D
Weight
31⁄44 5.1
33⁄445⁄167.5
PART NO. NH 8
Quarter Bend with Heel Opening
Size
3 x 2
4 x 2
D
E
Weight
5
27⁄85.6
51⁄231⁄47.2
PART NO. NH 8A
Double Quarter Bend
Size
2
3
4
D
Weight
41⁄24.5
5
7.1
51⁄29.7
6
No-Hub Pipe and Fittings
PART NO. NH 8B
Extended Quarter Bend
with Low Heel Outlet
Size
D
5
3 x 2
E
Weight
101⁄27.8
PART NO. NH 9
Size
2
3
4
Fifth Bend
D
PART NO. NH 10
Sixth Bend
Size
2
3
4
D
Weight
31⁄42.2
31⁄23.0
313⁄165.3
PART NO. NH 12
Eighth Bend
Size
Weight
311⁄162.3
41⁄163.7
4 7⁄166.1
D
Weight
11⁄225⁄81.5
2
23⁄41.5
3
3
2.9
4
31⁄84.0
5
37⁄87.4
6
41⁄169.1
8
5
14.9
10
515⁄1631.7
12
69⁄1631.6
15
713⁄1662.0
7
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 12
Size
Long Eighth Bend
2 x 12
2 x 18
3 x 12
3 x 18
4 x 12
D
12
18
12
18
12
E
PART NO. NH 14
Sixteenth Bend
Size
Weight
23⁄44.6
23⁄47.3
3
8.0
3
10.2
31⁄89.7
D
Weight
11⁄221⁄81.2
2
21⁄81.4
3
21⁄42.1
4
25⁄163.4
5
27⁄85.4
6
3
6.7
8
33⁄412.0
PART NO. NH 16
Size
2
3
4
5
6
8
10
12
15
Short Sweep
D
Weight
61⁄23.1
7
6.3
71⁄28.1
81⁄213.1
9
17.1
101⁄231.0
12
53.4
131⁄461.3
143⁄4105.6
8
No-Hub Pipe and Fittings
PART NO. EZS 14
Extended Short Sweep
Size
2 x 18
2 x 24
2 x 34
E
F
PART NO. NH 18
Long Sweep
Size
Weight
61⁄218 8.0
61⁄22411.0
61⁄2 3413.9
D
Weight
11⁄291⁄44.4
2
91⁄25.8
3
10
9.4
4
101⁄212.3
5
111⁄218.6
6
12
23.3
PART NO. NH 18
Reducing Long Sweep
Size
4 x 3
D
Weight
101⁄212.4
9
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 20
Size
D
Wye
F
G Weight
11⁄2 x 11⁄24
6
2 2.5
2 x 2
45⁄865⁄8 23.3
3 x 11⁄245⁄861⁄8115⁄164.4
3 x 2
55⁄1665⁄811⁄23.4
3
53⁄48 21⁄44.6
4 x 2
6
65⁄8 15.1
4 x 3
61⁄2 8111⁄167.3
4
71⁄1691⁄227⁄169.1
15
5 x 2
71⁄281⁄16
⁄168.8
5 x 3
8
911⁄16111⁄1610.5
5 x 4
81⁄2113⁄1627⁄1613.1
5
91⁄2125⁄831⁄815.1
1
6 x 2
81⁄485⁄16
⁄29.8
6 x 3
83⁄493⁄411⁄412.5
6 x 4
91⁄4113⁄16115⁄1614.6
6 x 5
101⁄4121⁄229⁄1617.6
6
103⁄4141⁄1635⁄1619.7
1
8 x 3
913⁄16915⁄16
⁄817.5
15
8 x 4
103⁄8117⁄16
⁄1622.0
8 x 5
113⁄81213⁄1615⁄823.9
8 x 6
1113⁄16143⁄1625⁄1628.3
8
133⁄8171⁄833⁄436.3
3
10 x 4
1111⁄16125⁄8
⁄432.9
10 x 6
131⁄8157⁄1623⁄1642.1
10 x 8
1411⁄16183⁄835⁄856.1
10
161⁄2211⁄251⁄1674.9
12
193⁄4251⁄253⁄497.0
15
231⁄430 63⁄4189.5
10
No-Hub Pipe and Fittings
PART NO. NH 21
Size
2
3 x 2
3
4 x 2
4 x 3
4
5 x 4
6 x 4
6
8
8 x 4
8x6
Double Wye
D
F
PART NO. NH 21A
Upright Wye
Size
2
3 x 2
3
4 x 2
4 x 3
4
5 x 2
5
Weight
45⁄865⁄84.5
55⁄1665⁄85.5
53⁄48 7.9
6
65⁄86.5
61⁄28 8.8
71⁄1691⁄212.1
81⁄2113⁄1615.7
91⁄4113⁄1616.4
103⁄4141⁄1627.4
133⁄8171⁄845.3
103⁄8117⁄1623.0
1113⁄16143⁄1631.3
H
E
F
G
Weight
81⁄451⁄27 2 4.8
83⁄1651⁄27 11⁄25.7
87⁄1651⁄283⁄823⁄169.5
81⁄451⁄27 1 7.7
87⁄1651⁄283⁄8111⁄1610.1
91⁄8 693⁄427⁄1612.9
9
61⁄8 8 111.0
117⁄1671⁄8123⁄423⁄419.9
11
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 22
Size
Combination
D
E
F
Weight
11⁄243⁄453⁄8 63.1
2 x 11⁄25 57⁄8 63.4
2
53⁄861⁄865⁄83.5
3 x 11⁄251⁄263⁄465⁄85.0
3 x 2
51⁄263⁄465⁄85.7
3
75⁄16 8 88.5
4 x 2
51⁄271⁄465⁄86.6
4 x 3
71⁄481⁄2 89.5
4
91⁄410 91⁄213.7
5 x 2
515⁄1673⁄481⁄168.5
5 x 3
73⁄49911⁄1612.0
5 x 4
93⁄4101⁄2113⁄1617.1
5
113⁄4121⁄2125⁄819.7
6 x 2
6
81⁄485⁄1612.0
6 x 3
713⁄1691⁄293⁄414.7
6 x 4
93⁄411113⁄1618.4
6 x 5 1111⁄1613 121⁄223.4
6
135⁄8143⁄8141⁄1630.0
8 x 4
97⁄16115⁄16113⁄1625.1
8 x 6
12
133⁄81315⁄1635.4
8
143⁄4159⁄161615⁄1649.3
PART NO. EZS 15
Extended Combination
Size
2 x 24
2 x 36
E
F
G
Weight
63⁄16253⁄8 2412.0
63⁄1636 343⁄415.4
12
No-Hub Pipe and Fittings
PART NO. NH 24
Double Combination
Size
2
3 x 2
3
4 x 2
4 x 3
4
D
E
F
PART NO. NH 26
Tapped Wye
Size
Weight
53⁄861⁄865⁄86.3
51⁄263⁄465⁄87.7
75⁄168 811.8
51⁄271⁄465⁄88.3
71⁄481⁄2 813.7
91⁄410 91⁄220.5
D
F
Weight
2 x 11⁄251⁄1665⁄83.4
2 x 2
51⁄1665⁄84.6
1
3 x 1 ⁄253⁄465⁄85.1
3 x 2
513⁄1665⁄85.3
1
4 x 1 ⁄267⁄1665⁄86.0
4 x 2
61⁄265⁄87.2
PART NO. NH 27
Tapped Double Wye
Size
D
F
Weight
2 x 11⁄251⁄1665⁄85.6
13
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 28
Sanitary Tee
Size
E
F
D Weight
11⁄2 x 11⁄241⁄461⁄241⁄42.9
2 x 11⁄241⁄265⁄841⁄43.4
2
41⁄267⁄841⁄23.1
1
3 x 1 ⁄25 61⁄241⁄44.5
3 x 2
5
67⁄841⁄23.7
3
5
8
5
5.5
4 x 2
51⁄267⁄841⁄25.3
4 x 3
51⁄28 5 7.6
4
51⁄291⁄851⁄28.5
5 x 2
61⁄281⁄2 58.3
5 x 3
6
95⁄1651⁄210.2
5 x 4
6
1013⁄32 611.5
5
61⁄2117⁄1661⁄212.5
6 x 2
61⁄283⁄16 59.9
6 x 3
61⁄293⁄1651⁄211.5
6 x 4
61⁄2101⁄16 612.0
6 x 5
7
111⁄261⁄215.6
6
7 121⁄2 712.9
8 x 3
71⁄2103⁄8 617.9
8 x 4
71⁄2111⁄261⁄221.6
8 x 5
8
121⁄2 724.0
8 x 6
8
131⁄271⁄224.0
8
81⁄2151⁄281⁄230.8
PART NO. EZS 16
2” x 24” Two-Way Sanitary Tee
Size
2 x 18
2 x 24
E
H
F
Weight
41⁄241⁄2 187.8
41⁄241⁄2 2410.4
14
No-Hub Pipe and Fittings
PART NO. NH 30
Sanitary Cross
Size
E
F
D
Weight
11⁄241⁄461⁄241⁄23.6
2
41⁄267⁄841⁄25.0
3 x 2
5
67⁄841⁄26.2
3
5
8
5
7.6
4 x 2
51⁄267⁄841⁄27.3
4 x 3
51⁄2 8 58.5
4
51⁄291⁄851⁄211.0
5 x 4
6
1013⁄32 613.4
6 x 4
61⁄2101⁄16 614.0
6
7
121⁄2 721.0
8 x 4
71⁄2111⁄261⁄223.0
8
81⁄2151⁄281⁄237.9
PART NO. NH 31
Sanitary Tee with 2” 90° Sanitary
Opening Above Center
(New Orleans Code)
SizeCDE FG
Weight
3
3
4
4
(L) 4 ⁄26 5 81⁄256.7
(R) 41⁄26 5 81⁄256.3
(L) 5 61⁄251⁄293⁄1651⁄28.6
(R) 5 61⁄251⁄293⁄1651⁄28.5
1
PART NO. NH 32
Sanitary Tee with 2” Side Inlets
Right Hand and Left Hand
Size
4 x 4 w/RH & LH
E F DWeight
59⁄1691⁄851⁄210.9
15
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 32B
Sanitary Tee with 2” 45° Sanitary
Opening Above Center
(New Orleans Code)
Size
D
E
F
G Weight
3 (L)
6
5 81⁄2 58.2
3 (R) 6
5 81⁄2 57.8
3(R&L) 6
5 81⁄2 59.1
4 (L) 61⁄251⁄293⁄1651⁄29.6
4 (R) 61⁄251⁄293⁄1651⁄29.4
PART NO. NH 33A
Sanitary Cross with 2” 90° Sanitary
Openings Above Center
(New Orleans Code)
Size
C
4
5 61⁄251⁄293⁄1651⁄210.8
D
E
F
G
Weight
PART NO. NH 33C
Sanitary Cross with Two 2” 90°
Sanitary Openings Above Center
(New Orleans Code)
Size
C
D
E
F
G Weight
3 4 ⁄26 5 81⁄2 59.0
4 5 61⁄251⁄293⁄1651⁄211.9
1
16
No-Hub Pipe and Fittings
PART NO. NH 33F
Sanitary Cross with Two 2” 45° Sanitary
Openings Same Side
(New Orleans Code)
Size
D
E
F
G
Weight
3 6
5 81⁄2 59.8
4 51⁄251⁄291⁄1651⁄213.8
PART NO. NH 33G
Sanitary Cross with 3” Vent and
Two 2” 45° Inlets
Size
A B
C
F
GWeight
4x3x4x2x2 33⁄4 51⁄4 43⁄4 101⁄2 61⁄2 24.0
PART NO. NH 34
Sanitary Tapped Tee
Size
D
E
F Weight
11⁄2 x 11⁄431⁄429⁄16511⁄162.3
11⁄2 x 11⁄231⁄429⁄16511⁄162.5
2 x 11⁄431⁄4213⁄16511⁄162.8
2 x 11⁄231⁄4213⁄16511⁄163.1
2 x 2
33⁄431⁄1663⁄83.8
3 x 11⁄431⁄435⁄16511⁄163.7
3 x 11⁄231⁄435⁄16511⁄163.6
3 x 2
33⁄439⁄1663⁄84.9
3 x 3
47⁄841⁄8 87.3
4 x 11⁄431⁄4313⁄16511⁄164.0
4 x 11⁄231⁄433⁄4511⁄164.8
4 x 2
33⁄441⁄1663⁄85.8
4 x 3
41⁄243⁄8 88.4
5 x 11⁄233⁄445⁄1673⁄166.5
5 x 2
41⁄449⁄16 89.3
6 x 11⁄233⁄4413⁄1663⁄48.4
6 x 2
41⁄451⁄1677⁄169.2
17
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. EZS 17
2” x 227⁄8” Extended Tapped
Sanitary Tee
Size
H
F
Weight
2 x 11⁄2 x 227⁄831⁄4227⁄89.6
2 x 2 x 227⁄833⁄4227⁄89.2
PART NO. EZS 27
Size
Sanitary Tapped Tee
H
2 x 11⁄2 x 31
2 x 2 x 31
F
PART NO. NH 35
Sanitary Tapped Cross
Size
Weight
111⁄43112.6
111⁄43113.6
D
E
F
Weight
11⁄2 x 11⁄231⁄429⁄16511⁄163.4
2 x 11⁄431⁄4213⁄16511⁄163.9
2 x 11⁄231⁄4213⁄16511⁄164.0
2 x 2
33⁄431⁄1663⁄85.3
3 x 11⁄231⁄435⁄16511⁄164.3
3 x 2
33⁄439⁄1663⁄86.1
4 x 11⁄231⁄433⁄4511⁄165.5
4 x 2
33⁄441⁄1663⁄86.9
18
No-Hub Pipe and Fittings
PART NO. EZS 18
2” x 227⁄8” Extended Tapped
Sanitary Cross
Size
H
F
Weight
2 x 11⁄2 x 227⁄831⁄4227⁄810.0
2 x 2 x 227⁄833⁄4227⁄811.9
PART NO. EZS 28
Sanitary Tapped Cross
Size
H
2 x 11⁄2 x 31
2 x 2 x 31
F
Weight
111⁄43115.0
111⁄43115.0
PART NO. NH 35B
Double Vertical Sanitary
Tapped Tee
Size
E
F
G
H Weight
2 x 11⁄2213⁄1693⁄441⁄231⁄44.8
19
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 36
Test Tee Less Plug
and PART NO. NH 36S
Test Tee with Southern
Raised-Head Brass Plug Installed
(2” through 8” only)
Size
IPS
Tap
2
3
4
5
6
8
10
4 x 3
2
2 63⁄833⁄1633⁄163.0
3 211⁄1673⁄437⁄837⁄85.8
4
3 87⁄847⁄1647⁄169.2
5 41⁄2111⁄253⁄453⁄415.2
6
5 121⁄261⁄461⁄422.0
8
6 151⁄475⁄875⁄837.1
10 61⁄2 20 10 1059.7
31⁄227⁄891⁄2 541⁄2 8.0
E
F
D
PART NO. NH 40
Increaser-Reducer
Size
F
8
8
8
2 x 3
2 x 4
3 x 4
D’
Weight
Weight
3.8
4.4
5.0
20
No-Hub Pipe and Fittings
PART NO. NH 40A
Short Reducer
Size
F
Weight
2 x 11⁄235⁄81.1
3 x 11⁄235⁄81.8
3 x 2
35⁄81.8
4 x 2
35⁄82.3
4 x 3
35⁄82.3
5 x 2
4
3.3
5 x 3
4
3.8
5 x 4
4
3.2
6 x 2
4
4.3
6 x 3
4
3.7
6 x 4
4
4.1
6 x 5
41⁄24.3
8 x 2
41⁄27.0
8 x 3
41⁄27.6
8 x 4
41⁄27.7
8 x 5
5
7.3
8 x 6
5
8.0
10 x 4
51⁄212.5
10 x 6
6
13.3
10 x 8
6
14.9
12 x 4
61⁄219.1
12 x 6
61⁄218.3
12 x 8
7
17.3
12 x 10
71⁄218.9
15 x 4
7
30.0
15 x 6
7
31.8
15 x 8
7
32.2
15 x 10
71⁄232.2
15 x 12
73⁄430.5
21
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 42
P-Trap
Size
D
J
Weight
1 ⁄26 ⁄431⁄23.4
2
71⁄2 44.7
3
9
51⁄28.9
1
4
10 ⁄261⁄217.0
6
14
81⁄233.6
1
3
PART NO. NH 42
Size
2 x 12
2 x 18
Long P-Trap
D
J
12
18
4
4
Weight
6.1
8.0
PART NO. NH 42A
Size
3 x 2
P-Trap, Reducing
D
J
9
Weight
51⁄210.0
PART NO. NH 43
P Trap with 1⁄2” Tap in Heel
Size
C
2
3
4
4 71⁄22 4 4.7
5 9
2 51⁄210.8
6 101⁄22 61⁄218.8
D
E
J
22
Weight
No-Hub Pipe and Fittings
PART NO. EZS 9
P-Trap with 11⁄2” Tapped Side Inlet
Size
2
H
F
Weight
53⁄1671⁄26.2
PART NO. EZS 10
Size
P-Trap with 2” Side Inlet
C
D
J
Weight
2 13⁄1671⁄231⁄166.4
PART NO. NH 44
P-Trap with Tapped Inlet
Size
C
D
J
Weight
11⁄2 x 11⁄231⁄263⁄431⁄23.0
2 x 11⁄24 71⁄24 4.5
2 x 2
4
71⁄24 5.4
PART NO. NH 44A
Deep Seal P Trap
Size
C
2
3
4
4
5
6
D
J
Weight
71⁄27 6.6
9
7 11.0
101⁄2818.6
23
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 45
Running Trap with Vent
Size
D
E
F
G
Weight
4 61⁄241⁄2 15101⁄220.5
PART NO. NH 45A
Running Trap with Double Vent
Size
C
4
6 61⁄241⁄215101⁄221.4
D
E
F
G
PART NO. EZS 13
45° Vented Tub Wye
Size
E
2
12
F
G
Weight
Weight
51⁄4153⁄410.1
PART NO. EZS 38
Size
2
2
G
Vented Tub Wye
H
F
Weight
91⁄251⁄415 9.4
24
51⁄4291⁄213.7
24
No-Hub Pipe and Fittings
PART NO. EZS 38 L
Size
2
Vented Tub Wye
Left Hand
G
H
PART NO. EZS 38 R
Vented Tub Wye
Right Hand
Size
2
F
Weight
91⁄233⁄4 1510.0
G
H
F
Weight
91⁄233⁄415 9.0
PART NO. NH 48
Tapped Adapters
Size
F
IPS
Tapping Weight
11⁄2 x 11⁄225⁄811⁄21.3
2 x 11⁄423⁄1611⁄41.0
2 x 11⁄223⁄1611⁄20.9
2 x 2
25⁄82 1.7
3 x 2
23⁄162 1.0
25
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. NH 50
Size
Blind Plug
F
Weight
11⁄213⁄40.6
2 13⁄40.7
3 13⁄41.1
4 13⁄42.0
5 13⁄42.9
6 13⁄43.2
8 21⁄46.5
10
3 14.7
12 31⁄217.6
15 31⁄228.0
PART NO. NH 52
Tapped Ferrule Less Brass Plug
and PART NO. NH 52S
Tapped Ferrule with Southern
Raised-Head Brass Plug Installed
Size
F
2
3
4
5
6
8
IPS
Tapping
Weight
23⁄1611⁄20.9
23⁄1621⁄21.9
23⁄1631⁄22.5
41⁄2 46.5
41⁄2 58.0
41⁄2 612.1
PART NO. NH 53
Single Two-Way Cleanout
Size
E
4
F
PART NO. NH 53A
Two-Way Cleanout
Size
4
Weight
71⁄2 1516.0
D
E
F
G
Weight
81⁄423⁄412 61⁄215.0
26
No-Hub Pipe and Fittings
PART NO. NH 54
Two-Way Baffle Cleanout
Size
D
3 x 3 x 4
4 x 3 x 4
4 x 4 x 4
F
Weight
N
O
H
U
B
15
9
14.2
191⁄291⁄224.0
183⁄891⁄222.0
PART NO. NH 56
Notched and Slotted Closet Collar
Size
4 x 3
4 x 3
4 x 4
4 x 4
D
E
F
A
Weight
31⁄233⁄871⁄447⁄323.3
8
327⁄6471⁄44 6.1
4
43⁄871⁄449⁄644.7
8
43⁄871⁄447⁄327.0
PART NO. NH 57
Horizontal Twin Tapped Tee
Size
A
D
F
H Weight
3 x 11⁄213⁄84 7 3 7.3
4 x 11⁄213⁄84 7 3 8.0
27
H
F
D
No-Hub Pipe and Fittings
PART NO. NH 457
Vented Closet Tee
with 2” Top Vent
(Left or Right; Designed for use below the floor;
Fitting does not require a baffle)
Size BCDEF G
Wt.
4x4x2x4(L) 41⁄451⁄433⁄44 101⁄233⁄412.1
4x4x2x4(R)41⁄451⁄433⁄44 101⁄233⁄411.6
PART NO. NH 458T
Vented Closet Tee
with 2” Top Vent and 2” Side Opening
(Left or Right; Designed for use below the floor;
Fitting does not require a baffle)
Size
ABCDEFGWt.
4x4x2x2x4(L)81⁄841⁄4 51⁄471⁄2 4 101⁄2 33⁄4 12.3
4x4x2x2x4(R)81⁄841⁄4 51⁄471⁄2 4 101⁄2 33⁄4 12.2
PART NO. NH 463
Vented Closet Cross with 2” Top Vent
(Designed for use below the floor;
Fitting has a baffle)
Size
B C D E F G Wt
4x4x2x4x4 41⁄451⁄433⁄44101⁄233⁄415.0
T
Additional drawing available in Detail Drawing Section
28
No-Hub Pipe and Fittings
PART NO. NH 464
Vented Closet Cross with 2” Top Vent
and 2” Side Opening
N
O
H
U
B
(Designed for use below the floor;
Fitting has a baffle)
Size
A B C D EF G Wt.
4x4x2x2x4x4 81⁄841⁄4 51⁄471⁄2 4 101⁄2 33⁄4 15.6
PART NO. NH 502T
4” No Hub Prison Fitting with 2” Top Vent
(Designed for use above the floor; Baffle helps prevent
passage of contraband between cells)
Part No.
Size
UPC# 611942-
A
NH 502
NH 502
NH 502
NH 502
4 Less Tap
4 With Tap
4x3 Less Tap
4x3 With Tap
00639
00640
11119
11120
8
8
8
8
T
C
Additional drawing available in Detail Drawing Section
29
F
5 1⁄412
5 1⁄412
5 1⁄412
5 1⁄412
G
8
8
8
8
Weight
20.3
20.8
23.4
23.4
No-Hub Pipe and Fittings
PART NO. EZS 50*
10” Closet Fittings with 2” Inlet
(Double, Left Hand or Right Hand; Designed for use below the floor;
Fitting does not have a baffle)
Part No.
Size
UPC# 611942-
EZS 50D***
EZS 50L
EZS 50R
4
4
4
04484
04476
04477
A
B
C
D
F
Weight
103⁄461⁄233⁄4441⁄215.0
103⁄461⁄233⁄4441⁄212.3
103⁄461⁄233⁄4441⁄212.2
PART NO. EZS 51*
10” Closet Fittings with 2” Inlet and 2” Side Inlet
(Double, Left Hand or Right Hand; Designed for use below the floor;
Fitting does not have a baffle)
Part No.
Size
EZS 51D*** 4
EZS 51L 4
EZS 51R 4
UPC# 611942-
04424
04425
04473
A
B
C
D
E
F
Weight
103⁄461⁄23 4 91⁄241⁄215.0
103⁄461⁄23 4 91⁄241⁄212.8
103⁄461⁄23 4 91⁄241⁄212.6
* When ordering please specify Double, Left or Right.
*** Double closet fitting does not have a baffle.
30
No-Hub Pipe and Fittings
HOW TO DETERMINE RIGHT or LEFT HAND CROSS-OVER
With the vented end toward you, hold the fitting so that you
are looking into its length with the curved side up. If the
vent is on your left side, it is a Left Hand fitting.
If the vent is on your right side, it is a Right Hand
fitting.
RIGHT HAND CROSS-OVER ILLUSTRATED
Note: VENT CROSS-OVER
for use with EZS-50 through 800 Series fittings.
Specify Right, Left, Plain or Double.
Note: Our crossovers are designed for use with EZS starter
fittings, that is for the vent and stack centerline to be 61⁄2”
PART NO. EZS 7
2” Vent Cross-Over, Plain
(No Outlets)
U.P.C. No.
611942
Size
04429
2 x 183⁄8
A
47⁄8
C
93⁄16
FWeight
183⁄8
8.1
PART NO. EZS 7D
2” Vent Cross-Over, Double (2 Inlets)
U.P.C. No.
611942 Size
04430
2 x 183⁄8
A
47⁄8
B
61⁄2
31
C
93⁄16
FWeight
183⁄8
8.0
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. EZS 7L
2” Vent Cross-Over
with Left Hand Inlet
U.P.C. No.
611942 Size
04431
2 x 183⁄8
PART NO. EZS 7R
04432
B
61⁄2
2 x 183⁄8
A
47⁄8
B
61⁄2
PART NO. EZS 1
Size
E
C
93⁄16
FWeight
183⁄8
8.2
2” Vent Cross-Over
with Right Hand Inlet
U.P.C. No.
611942 Size
A
47⁄8
Figure One
F
D
Weight
2 x 11⁄233⁄167 47⁄85.3
32
C
93⁄16
FWeight
183⁄8
8.4
No-Hub Pipe and Fittings
PART NO. NH 25
Figure Five Double Fixture Fitting
Size
D
E
F
G Weight
2
61⁄2 5 8113⁄167.0
3
87⁄869⁄16101⁄82 10.5
3 x 2 x 3 x 3 87⁄869⁄1691⁄4210.7
4
101⁄473⁄4 12115⁄1622.5
4 x 2 x 4 x 4 101⁄473⁄4111⁄2115⁄1619.8
N
O
H
U
B
PART NO. EZS 6*
Figure Six
(Double, Left Hand or Right Hand; Designed for use below the floor)
Part No.
Size
EZS 6D**
EZS 6D**
3x2
4x2
41⁄879⁄1651⁄161137⁄1613.0
41⁄2961⁄213 4 23.1
C
D
E
EZS 6L
EZS 6L
3x2
4x2
41⁄879⁄1651⁄161137⁄1611.4
41⁄2961⁄213 4 18.0
EZS 6R
EZS 6R
3x2
4x2
41⁄879⁄1651⁄161137⁄1611.4
41⁄2961⁄213 4 18.0
* When ordering please specify Double, Left or Right.
** Double fitting has a baffle.
33
F
H
Weight
No-Hub Pipe and Fittings
PART NO. EZS 8*
Figure Eight
(Double, Left Hand or Right Hand; Designed for use below the floor)
Part No.
Size
C
D
E
F
H
Weight
EZS 8D**
3x2
41⁄879⁄1651⁄161137⁄1613.0
EZS 8L
EZS 8L
3x2
4x2
41⁄879⁄1651⁄161137⁄1612.5
41⁄2961⁄213 4 19.8
EZS 8R
EZS 8R
3x2
4x2
41⁄879⁄1651⁄161137⁄1612.5
41⁄2961⁄213 4 19.8
PART NO. EZS 8A
Figure Eight Double Fixture
Fitting, Extended**
(Designed for Use Below the Floor)
Size
D
4 x 2
9
E
F
H
Weight
61⁄213 8 23.4
* When ordering please specify Double, Left or Right.
** Double fitting has a baffle.
34
No-Hub Pipe and Fittings
PART NO. EZS 100*
16” Closet Fittings with 2” Inlets
(Double, Left Hand or Right Hand; Designed for use below the floor)
Part No.
Size
A
B
C
D
E
M
Weight
EZS 100D 4x16 163⁄4541⁄261⁄251⁄25 22.0
EZS 100L
4x16
163⁄4541⁄261⁄251⁄25 20.0
EZS 100R 4x16
163⁄4541⁄261⁄251⁄25 21.1
M & B dimensions must be
measured from the bottom
of the fitting.
* When ordering please specify Double, Left or Right.
35
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. EZS 400*T
30” Closet Fittings with 2” Inlet
(Double, Left Hand or Right Hand; Designed for use in the floor)
Part No. Size A
B
C
D
E
M
Weight
EZS 400D 4x30 30 See Chart 41⁄261⁄251⁄2 See Chart 38.9
EZS 400L 4x30
30
See Chart 41⁄261⁄251⁄2 See Chart
36.8
EZS 400R 4x30
30
See Chart 41⁄261⁄251⁄2 See Chart
35.4
M & B dimensions must be
measured from the bottom
of the fitting.
M
B
12261⁄2
61⁄2
4
0
* When ordering please specify Double, Left or Right.
T
Additional drawing available in Detail Drawing Section
36
12
61⁄2
0
No-Hub Pipe and Fittings
PART NO. EZS 700*T
Threaded Starter Fitting with or without No-Hub Inlets
(Double, Left Hand or Right Hand; Designed for use above the floor with
back-outlet water closets; Double Starter fittings have a baffle)
Part No.
Size
A
B
C
D
E
Weight
EZS 700D** 4x28
0
0
51⁄228 61⁄240.0
EZS 700D** 4x28
0
81⁄251⁄228 61⁄242.0
1
EZS 700D** 4x28 23 ⁄281⁄251⁄228 61⁄242.0
EZS 700L
EZS 700L
EZS 700L
EZS 700L
4x28
4x28
4x28
4x28
0
0
51⁄228 61⁄234.6
0
81⁄251⁄228 61⁄235.7
14
81⁄251⁄228 61⁄236.3
231⁄281⁄251⁄228 61⁄232.0
EZS 700R
EZS 700R
EZS 700R
EZS 700R
4x28
4x28
4x28
4x28
0
0
51⁄228 61⁄230.0
1
0
8 ⁄251⁄228 61⁄234.0
14
81⁄251⁄228 61⁄235.3
1
23 ⁄281⁄251⁄228 61⁄232.0
FLOOR/CEILING
A & B Dimensions must be
measured from the top
of the fitting.
2” inlets available
* When ordering please specify Double, Left or Right.
** Double starter fittings have a baffle.
Note: Trim package not included in price of fitting
“O” dimension denotes the absence of the designated inlet.
T
Additional drawing available in Detail Drawing Section
37
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. EZS 800*T
Threaded Starter Fitting with or without No-Hub Inlets
(Double, Left Hand or Right Hand; Designed for use above the floor with
back-outlet water closets; Double starter fittings have a baffle)
Part No.
Size
A
B
C
D
E
Weight
EZS 800D** 4x28
16
0
51⁄228 61⁄242.0
EZS 800D** 4x28
16
81⁄251⁄228 61⁄242.0
EZS 800L
EZS 800L
4x28
4x28
16
16
0
51⁄228 61⁄235.4
8 ⁄251⁄228 61⁄236.3
EZS 800R
EZS 800R
4x28
4x28
16
16
0
51⁄228 61⁄235.6
81⁄251⁄228 61⁄235.3
1
FLOOR/CEILING
A & B Dimensions must be
measured from the top
of the fitting.
2” inlets available
* When ordering please specify Double, Left or Right.
** Double starter fittings have a baffle.
Note: Trim package not included in price of fitting
“O” dimension denotes the absence of the designated inlet.
T
Additional drawing available in Detail Drawing Section
38
No-Hub Pipe and Fittings
PART NO. EZS 710*
No-Hub Starter Fitting with or without 2” No-Hub Inlets
(Double, Left Hand or Right Hand; Designed for use above the floor with
back-outlet water closets; Double starter fittings have a baffle)
Part No.
Size
A
B
C
D
E
Weight
EZS 710D** 4x28
0
0
51⁄228 4 43.0
EZS 710D** 4x28
0
81⁄251⁄228 4 43.0
EZS 710D** 4x28 231⁄281⁄251⁄228 4 43.0
EZS 710L
EZS 710L
EZS 710L
EZS 710L
4x28
4x28
4x28
4x28
0
0
51⁄228
0
81⁄251⁄228
14
81⁄251⁄228
231⁄281⁄251⁄228
4
4
4
4
36.6
36.6
36.6
36.6
EZS 710R
EZS 710R
EZS 710R
EZS 710R
4x28
4x28
4x28
4x28
0
0
51⁄228
0
81⁄251⁄228
14
81⁄251⁄228
231⁄281⁄251⁄228
4
4
4
4
36.6
36.6
36.6
36.6
(Illustration
Shows Left Hand)
(Illustration
Shows Double)
A & B Dimensions must be
measured from the top
of the fitting.
2” inlets available
* When ordering please specify Double, Left or Right.
** Double starter fittings have a baffle.
Note: Not designed for use with trim package
“O” dimension denotes the absence of the designated inlet.
39
N
O
H
U
B
No-Hub Pipe and Fittings
PART NO. EZS 810*
No-Hub Starter Fitting with or without 2” No-Hub Inlets
(Double, Left Hand or Right Hand; Designed for use above the floor with
back-outlet water closets; Double starter fittings have a baffle)
Part No.
Size
A
B
C
D
E
Weight
EZS 810D** 4x28
16
0
51⁄228 61⁄243.0
EZS 810D** 4x28
16
81⁄251⁄228 61⁄243.0
EZS 810L
EZS 810L
4x28
4x28
16
16
0
51⁄228 61⁄236.6
81⁄251⁄228 61⁄236.6
EZS 810R
EZS 810R
4x28
4x28
16
16
0
51⁄228 61⁄236.6
81⁄251⁄228 61⁄236.6
(Illustration
Shows Right Hand)
(Illustration
Shows Double)
A & B Dimensions must be
measured from the top
of the fitting.
2” inlets available
* When ordering please specify Double, Left or Right.
** Double starter fittings have a baffle.
Note: Not designed for use with trim package
“O” dimension denotes the absence of the designated inlet.
40
No-Hub Pipe and Fittings
MOUNTING HARDWARE
PART NO. EZS 22
Trim Package, Support Frame
Assembly
PART NO. EZS 23
Trim Package, Floor-Mounted
Back-Outlet Assembly
(Note: Not to be used with PART NO.
EZS 22 Support Frame Assembly)
A
B
20
9
C
D
71⁄24
1—FRAME
1—LEFT LEG
1—RIGHT LEG
1—SUPPORT LEG (used for single only)
5—1⁄2” x 11⁄4” BOLTS
5—1⁄2” FLAT WASHERS
1—4” PVC Sch. 80 NIPPLE with
TEST CAP
1—BOWL GASKET
2—5⁄16” x 12” RODS
2—5⁄16” HEX NUTS
2—5⁄16” FLAT WASHERS
2—5⁄16” CAP NUTS
PART NO. EZS 24
Trim Package, Wall-Hung Back-Outlet Assembly
(Note: To be used with PART NO. EZS 22 Support Frame Assembly)
Exploded View of Support
Assembly Hardware
1—4” PVC Sch. 80 NIPPLE with TEST CAP
1—BOWL GASKET
4—5⁄8” x 12” RODS
4—5⁄8” CHROME CAP NUTS
8—5⁄8” JAM NUTS
4—5⁄8” FLAT WASHERS
4—5⁄8” FIBER WASHERS
3—3⁄8” x 11⁄2” BOLTS FOR FACEPLATE
3—3⁄8” FLAT WASHERS
4—5⁄8” STAR WASHERS
EZS 22 and EZS 24 Assemblies Illustrated
41
N
O
H
U
B
No-Hub Pipe and Fittings
TYPICAL HIGH-RISE BUILDING INSTALLATION
42
No-Hub Pipe and Fittings
TYPICAL BACK-TO-BACK INSTALLATION
Typical installation shows back-to-back water closets and
back-outlet tubs. This system can be changed to use floormounted back-outlet water closets and bottom-outlet tubs.
43
N
O
H
U
B
Detail Drawings
PART NO. EZS 400D
Charlotte Pipe Starter Fitting
4x30 Closet Fitting Double - M Inlet 0; B Inlet 61⁄2”
44
Detail Drawings
PART NO. EZS 700D
Charlotte Pipe Starter Fitting
4x28 Threaded Double - A Inlet 0; B Inlet 81⁄2”
with EZS 22 Support Frame and EZS 24 Trim Package
D
E
T
A
I
L
D
R
A
W
I
N
G
S
45
Detail Drawings
PART NO. EZS 700R
Charlotte Pipe Starter Fitting
4x28 Threaded Right Hand - A Inlet 0; B Inlet 0
with EZS 23 Trim Package
46
Detail Drawings
PART NO. EZS 800D
Charlotte Pipe Starter Fitting
4x28 Threaded Double - A Inlet 16; B Inlet 0
with EZS 23 Trim Package
D
E
T
A
I
L
D
R
A
W
I
N
G
S
47
Detail Drawings
PART NO. EZS 800L
Charlotte Pipe Starter Fitting
4x28 Threaded Left Hand - A Inlet 16; B Inlet 0
with EZS 22 Support Frame and EZS 24 Trim Package
48
Detail Drawings
PART NO. NH 458
Charlotte Pipe Starter Fitting
4x4x2x2x4 Vented Closet Tee, Left Hand,
with 2” Top Vent and 2” Side Inlet
D
E
T
A
I
L
D
R
A
W
I
N
G
S
49
Detail Drawings
PART NO. NH 502
Charlotte Pipe Starter Fitting
4” No-Hub with 2” Top Vent and 2” 45° Tap Service
for Two Cells at 45° Angle
50
Service
F
1/8
S
R
G
P
T
A
Y
B
Laying Length
(Telescoping Length)
Telescoping
Length
Size
Y
J
PIPE - SERVICE*
Hub
I.D.
A
Barrel
O.D.
I.D.
J
B
Nominal
Thickness
T
2” 2.50 2.94 2.301.960.17
3” 2.75 3.94 3.302.960.17
4” 3.00 4.94 4.303.940.18
5” 3.00 5.94 5.304.940.18
6” 3.00 6.94 6.305.940.18
8” 3.50 9.25 8.387.940.23
10” 3.50 11.3810.509.940.28
12” 4.24 13.5012.5011.94 0.28
15” 4.25 16.95 15.8815.16 0.36
FIVE FOOT PIPE BUNDLES
SERVICE
Single
Hub
Double
Hub
SIZE
PIECES
2” 100
3” 60
4” 46
5” 33
6” 23
8” 11
10” 8
12” 6
15” 2
2” 100
3” 60
4” 46
5” 33
6” 23
WEIGHT HEIGHT
224820”
191022”
190425”
175031”
159131”
112830”
122627”
111431”
57534”
211323”
191424”
195625”
188835”
159835”
* For additional dimensional information please see the Cast Iron Technical and
Installation Manual.
51
S
E
R
V
I
C
E
Service Pipe and Fittings
30” SINGLE HUB PIPE BUNDLES
SERVICE
30”
Single
Hub
SIZE
PIECES
WEIGHT HEIGHT
WEIGHT HEIGHT
8 x 30”11
10 x 30”8
12 x 30”6
15 x 30”2
64524”
73324”
64328”
33334”
TEN FOOT PIPE BUNDLES
SERVICE
SIZE
Single
Hub
PIECES
2 x 10’54
3 x 10’36
4 x 10’27
5 x 10’24
6 x 10’18
8 x 10’8
10 x 10’6
12 x 10’6
15 x 10’2
2165 12”
2141 15”
2028 18”
2409 20”
2211 23”
1444 22”
1558 27”
2075 30”
1050 23”
PART NO. SV 1
Pipe, 5’ Lengths, Single Hub
Size
L
Weight
2” x 5’5’22.5
3” x 5’5’31.8
4” x 5’5’41.0
5” x 5’5’52.5
6” x 5’5’69.2
8” x 5’5’101.0
10” x 5’5’150.9
12” x 5’5’185.7
15” x 5’5’287.5
Weights are approximate and are for shipping purposes only.
52
Service Pipe and Fittings
PART NO. SV 1A
Pipe, 30” Lengths, Single Hub
Size
L
Weight
8” x 30”30”58.7
10” x 30”30”91.7
12” x 30”30”107.1
15” x 30”30”166.3
PART NO. SV 2
Pipe, 5’ Lengths, Double Hub
Size
L
Weight
2” x 5’4’ 91⁄2”21.1
3” x 5’4’ 91⁄4”31.9
4” x 5’4’ 9”42.5
5” x 5’4’ 9”57.2
6” x 5’4’ 9”69.5
PART NO. SV 3
Pipe, 10’ Lengths, Single Hub
Size
L
Weight
2” x 10’10’40.1
3” x 10’10’59.5
4” x 10’10’75.1
5” x 10’10’100.4
6” x 10’10’122.8
8” x 10’10’180.5
10” x 10’10’259.7
12” x 10’10’345.9
15” x 10’10’525.1
53
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 4
Pipe, 30” Lengths, Double Hub
Size
L
Weight
2” x 30”25”13.8
3” x 30”241⁄2”17.6
4” x 30”24”27.1
PART NO. SV 900
Service Weight Charlotte Seal Gasket
Size
A
D
F
G
H
2 31⁄223⁄1621⁄831⁄8131⁄320.3
3 41⁄233⁄1631⁄841⁄821⁄160.4
4 51⁄243⁄1641⁄851⁄429⁄320.5
5 61⁄253⁄1651⁄861⁄429⁄320.6
6 71⁄263⁄1661⁄871⁄421⁄40.8
8 93⁄4813⁄3283⁄1699⁄323 1.5
10 127⁄16101⁄2105⁄161111⁄1623⁄42.4
PART NO. SV 950
Service Weight Quik-Tite Gasket
Size
2
3
4
5
6
8
10
12
A
D
F
G
H
1
1
H
F
G
A
D
Weight
3 ⁄22 ⁄162 3 ⁄41 ⁄320.3
47⁄831⁄1631⁄1643⁄813⁄40.4
53⁄44 4 53⁄1613⁄40.5
63⁄45 5 6 21⁄160.8
8 65⁄1665⁄16711⁄3225⁄320.8
10 83⁄1683⁄1681⁄221⁄21.5
121⁄4101⁄410 111⁄221⁄22.3
143⁄8121⁄412 14 27⁄83.0
1
A
D
Weight
3
54
H
F
G
Service Pipe and Fittings
PART NO. SV 5
Quarter Bend
Size
D
X
Weight
2
6 31⁄45.1
3747.7
4
8 41⁄213.1
5 81⁄25 16.2
6
9 51⁄221.7
8 111⁄265⁄836.5
10 121⁄275⁄857.3
12
15 83⁄482.8
(XH) (XH)(XH)
15
PART NO. SV 7
Size
2
3
4
5
6
8
Sixth Bend
D
X
Weight
43⁄42 4.3
51⁄221⁄26.9
65⁄16213⁄1610.8
65⁄831⁄814.0
67⁄833⁄816.4
9 41⁄832.5
S
E
R
V
I
C
E
(HX)
Please see Extra Heavy dimensions
55
Service Pipe and Fittings
PART NO. SV 8
Size
2
3
4
5
6
8
10
12
15
Eighth Bend
D
X
Weight
41⁄411⁄24.2
415⁄16115⁄166.5
511⁄1623⁄1610.7
57⁄823⁄813.1
61⁄1629⁄1616.6
8 31⁄832.3
3
8 ⁄831⁄244.1
105⁄1641⁄1665.4
(XH) (XH)(XH)
PART NO. SV 9
Sixteenth Bend
Size
2
3
4
5
6
8
10
12
15
(HX)
D
X
Weight
7
35⁄8
⁄83.4
43⁄1613⁄166.0
413⁄1615⁄168.8
47⁄813⁄811.6
5 11⁄213.8
611⁄16113⁄1624.6
67⁄8237.1
85⁄823⁄857.7
(XH) (XH)(XH)
Please see Extra Heavy dimensions
56
Service Pipe and Fittings
PART NO. SV 10
Quarter Bend with Low Heel Inlet
Size
D
3 x 2
4 x 2
7
8
X
X’
Weight
4
9
9.8
41⁄2101⁄213.0
PART NO. SV 12
Quarter Bend with Side Opening
Size
D
4w2LH
4w2RH
8
8
X
PART NO. SV 15
Double Quarter Bend
Size
D
4
8
Weight
31⁄216.2
31⁄216.5
X
Weight
41⁄215.0
S
E
R
V
I
C
E
57
Service Pipe and Fittings
PART NO. SV 18
Reducing Quarter Bend
Size
D
3 x 2
4 x 2
4 x 3
X
Weight
7
33⁄87.0
71⁄241⁄211.7
81⁄843⁄89.1
PART NO. SV 23
Single Hub Return Bend
Size
3
4
D
X
J
Weight
55⁄8557⁄89.4
71⁄2611⁄3273⁄1616.4
PART NO. SV 25
Size
2 x 12
3 x 12
4 x 12
4 x 16
4 x 18
4 x 24
Long Quarter Bend
D
12
12
12
16
18
24
X
Weight
31⁄46.9
4
10.3
41⁄215.4
41⁄220.4
41⁄221.4
41⁄227.9
58
Service Pipe and Fittings
PART NO. SV 26
Size
2 x 12
3 x 12
3 x 18
4 x 12
4 x 18
6 x 18
Long Eighth Bend
D
12
12
18
12
18
18
X
PART NO. SV 29
Short Sweep Bend
Size
D
Weight
11⁄26.2
115⁄169.9
115⁄1612.4
23⁄1615.6
23⁄1620.6
29⁄1631.0
X
Weight
2
8 51⁄46.2
3969.4
4
10 61⁄216.6
5 101⁄27 20.7
6
11 71⁄226.6
8 131⁄285⁄837.4
10 141⁄295⁄871.5
12
17 103⁄4100.6
S
E
R
V
I
C
E
59
Service Pipe and Fittings
PART NO. SV 30
Size
Long Sweep Bend
D
X
Weight
2
11 81⁄47.6
312912.2
4
13 91⁄221.2
5 131⁄210 25.3
6
14 101⁄229.9
8 161⁄2115⁄852.9
10 171⁄2125⁄882.6
12
20 133⁄4103.5
(XH)
(XH)
(XH)
15
PART NO. SV 31
Reducing Long Sweep Bend
Size
D
12
13
3 x 2
4 x 3
X
Weight
9
12.0
91⁄217.6
PART NO. SV 32
Combination Wye & Eighth Bend
(Charlotte Pattern)
Size
G
H
X
X’
Weight
4 57⁄1643⁄8113⁄861⁄220.3
(XH)
Please see Extra Heavy dimensions
60
Service Pipe and Fittings
PART NO. SV 33
Combination Wye & Eighth Bend
(Long Turn Pattern)
Size
G
H
X
X’
Weight
2 x 2
4
33⁄8 847⁄88.6
3 x 2 43⁄16 4 953⁄411.1
3 x 3
5
51⁄16101⁄2714.8
4 x 2 311⁄1641⁄2 961⁄415.5
4 x 3 41⁄259⁄16101⁄271⁄219.2
4 x 4 41⁄271⁄2 12 924.5
5 x 2 33⁄8 5 963⁄414.6
5 x 3
4
61⁄16101⁄2821.3
5 x 4 41⁄475⁄16 1291⁄225.9
5 x 5 51⁄285⁄8131⁄21133.6
6 x 2 211⁄1651⁄2 971⁄419.6
6 x 3 31⁄869⁄16101⁄481⁄224.7
6 x 4 41⁄4713⁄16 12 1031.7
6 x 5 51⁄1691⁄8131⁄2111⁄234.3
6 x 6 53⁄4105⁄16 15127⁄844.2
8 x 2 31⁄861⁄2101⁄281⁄434.0
8 x 4 43⁄4813⁄16131⁄21140.1
8 x 5 51⁄2101⁄8 15121⁄249.6
8 x 6 65⁄16115⁄16161⁄2137⁄855.7
8 x 8 711⁄16137⁄8191⁄21785.6
PART NO. SV 35
Double Combination Wye & Eighth Bend
(Charlotte Pattern)
Size
4
G
H
X
X’
Weight
57⁄1643⁄8113⁄861⁄226.0
61
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 35F
Double Combination Wye & Eighth Bend
(Long Turn Pattern)
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 4
6 x 4
6 x 6
G
H
X
X’
Weight
4
33⁄88 47⁄812.0
43⁄16 4 953⁄414.6
5
51⁄16101⁄2722.0
311⁄1641⁄29 61⁄419.7
41⁄259⁄16101⁄271⁄226.5
51⁄4613⁄1612 9 36.2
41⁄475⁄1612 91⁄230.9
41⁄4713⁄1612 10 41.0
53⁄4105⁄1615 127⁄869.6
PART NO. SV 35F
Double Combination Wye & Eighth Bend
with 2” Cup Hub Inlet
Size
G
G’
H
X
X’
Weight
4 41⁄4 10121⁄1612 9 41.7
PART NO. SV 39A
Combination Wye & Eighth Bend
with Side Inlet
Size
G’
4w/2RH
4w/2LH
10
10
H
X
X’
Weight
121⁄1612 9 27.3
121⁄1612 9 28.3
PART NO. SV 41
Combination Wye & Eighth Bend
with Cleanout on Main
Size
IPS
Tap
4
31⁄2 9123⁄16121⁄418.9
G
X
X’
62
Weight
Service Pipe and Fittings
PART NO. SV 42
Straight Tee
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 5
6 x 4
6 x 6
8 x 4
G
X
X’
Weight
61⁄4 813⁄47.0
7
9
21⁄29.0
71⁄2 1021⁄212.0
7
9
3
12.7
71⁄210 3 14.0
8
11
3
16.6
81⁄2 1231⁄219.0
8
11
4
19.9
9
13
4
24.0
95⁄8127⁄851⁄437.0
S
E
R
V
I
C
E
63
Service Pipe and Fittings
PART NO. SV 43
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 4
5 x 5
6x2
6 x 3
6 x 4
6 x 6
8 x 4
8 x 6
8 x 8
10 x 4
10 x 6
10 x 8
10 x 10
12 x 6
12 x 8
12 x 10
12 x 12
15 x 6
15 x 8
15 x 12
15 x 15
(XH)
G
Sanitary Tee
X
X’
Weight
61⁄48 23⁄47.9
7
9
4
10.9
71⁄210 4 11.9
7
9
41⁄214.2
71⁄210 41⁄216.9
8
11
41⁄218.6
8
11
5
17.9
81⁄212 5 22.3
7
9
51⁄215.0
71⁄210 51⁄221.4
8
11
51⁄222.8
9
13
51⁄229.8
93⁄413 61⁄235.7
103⁄415 61⁄243.0
113⁄417 65⁄850.8
93⁄413 71⁄252.0
103⁄415 71⁄257.7
113⁄417 75⁄868.0
123⁄419 75⁄875.9
12
161⁄281⁄279.0
13
181⁄285⁄8104.0
14
201⁄285⁄8123.0
15
221⁄283⁄4113.0
12
161⁄2 10145.0
13
181⁄2101⁄8173.0
15
221⁄2101⁄4204.0
(XH)
(XH) (XH)(XH)
Please see Extra Heavy dimensions
64
Service Pipe and Fittings
PART NO. SV 44
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 2
5 x 3
5 x 4
5 x 5
6 x 2
6 x 3
6 x 4
6 x 5
6 x 6
8 x 2
8 x 3
8 x 4
8 x 5
8 x 6
8 x 8
10 x 3
10 x 4
10 x 5
10 x 6
10 x 8
10 x 10
12 x 4
12 x 5
12 x 6
12 x 8
12 x 10
12 x 12
15 x 4
15 x 6
15 x 8
15 x 10
15 x 12
15 x 15
(XH)
G
Wye
X
X’
Weight
4
8
4
8.3
43⁄169 5 10.9
5
101⁄251⁄212.2
35⁄89 53⁄414.4
47⁄16101⁄261⁄416.8
51⁄412 63⁄420.3
31⁄89 61⁄215.3
37⁄8101⁄2719.8
411⁄1612 71⁄223.0
51⁄2131⁄2827.0
29⁄169 71⁄419.7
33⁄8101⁄273⁄423.7
43⁄1612 81⁄426.7
415⁄16131⁄283⁄429.5
53⁄415 91⁄436.5
31⁄8101⁄281⁄231.0
315⁄1612 9 33.2
43⁄4131⁄291⁄238.3
51⁄215 1041.2
65⁄16161⁄2101⁄245.4
711⁄16191⁄21113⁄1658.4
23⁄412103⁄454.0
39⁄16131⁄2111⁄855.4
45⁄1615 115⁄860.6
51⁄8161⁄2121⁄864.1
61⁄2191⁄2137⁄1686.9
8
221⁄2141⁄2111.1
41⁄8 15127⁄1669.7
47⁄8161⁄21215⁄1678.0
511⁄1618 137⁄1687.7
71⁄1621 143⁄4100.6
89⁄16 241513⁄16131.0
101⁄827 167⁄8175.2
63⁄8 15 15138.5
4
18
153⁄4153.6
53⁄8 21171⁄16187.1
67⁄824181⁄8225.0
87⁄1627193⁄16260.0
(XH)
(XH)
(XH)
(XH)
Please see Extra Heavy dimensions
65
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 50
Sanitary Tee
with Left Hand Side Tap
Size
G
4w/2
8
G’
X
9
11
X’
Weight
41⁄216.3
PART NO. SV 50A
Sanitary Tee
with Right Hand Side Tap
Size
G
4w/2 8
G’
X
9
11
X’
Weight
41⁄216.5
PART NO. SV 50B
Sanitary Tee
with Right and Left Hand Side Taps
Size
G
G’
X
4w/2
8
9
11
X’
Weight
41⁄216.3
PART NO. SV 56
Sanitary Tee with Left Hand Side Inlet
Size
G
G’
X
4w/2
8
9
11
X’
Weight
41⁄220.2
66
Service Pipe and Fittings
PART NO. SV 56B
Sanitary Tee
with Right Hand Side Inlet
Size
G
G’
X
4w/2
8
9
11
X’
Weight
41⁄220.0
PART NO. SV 56C
Sanitary Tee
with Right and Left Hand Side Inlets
Size
G
G’
X
4w/2
8
9
11
X’
PART NO. SV 57
Wye with Left Hand Side Inlet
Size
4w/2
G
G’
X
X’
4w/2
Weight
51⁄410 12 63⁄423.8
PART NO. SV 57A
Wye with Right Hand Side Inlet
Size
Weight
41⁄223.1
G
G’
X
X’
Weight
51⁄410 12 63⁄423.8
67
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 71A
Size
4
Single Two-Way Cleanout
X
E’
G
Weight
227⁄1693⁄8123⁄433.5
PART NO. SV 71B
Short Special Two-Way Cleanout
Size
G
X
X’
Weight
4
8
12
4
16.0
PART NO. SV 72
Double Two-Way Cleanout
Size
4
6 x 4 x 4
G
J
X
X’ Weight
61⁄267⁄16135⁄871⁄231.2
61⁄267⁄16135⁄881⁄439.1
PART NO. SV 76
Sanitary Tee with Cleanout on Main
Size
IPS
Tap
4
31⁄2 8121⁄841⁄216.7
G
X
X’
68
Weight
Service Pipe and Fittings
PART NO. SV 79
Washington Test Tee¥
Size
IPS
Tap
2
3
4
5
6
8
10
2
4
4
5
6
8
10
E’
G
X
Weight
13⁄479 7.3
27⁄871⁄8103⁄413.1
31⁄471⁄4105⁄816.8
35⁄8 71122.5
4 83⁄413 26.9
5
11 163⁄841.6
71⁄2 11175⁄868.7
PART NO. SV 80
Cleanout Tee with Brass Plug
Size
IPS
Tap
E’
G
X
Weight
2 11⁄22 61⁄48 6.2
3 2 21⁄279 9.3
4 3
3
8 11 14.6
5 4 31⁄281⁄212 18.7
6 4 41⁄4 91325.3
12 8
8
13 181⁄292.2
PART NO. SV 81
Miami Test Tee, Less Plug
and PART NO. SV 81S
Miami Test Tee with Southern
Raised-Head Brass Plug Installed
Size
IPS
Tap
2
3
4
6
2
3
4
6
E’
G
X
Weight
21⁄3261⁄29 7.0
21⁄265⁄895⁄810.0
3
71⁄411 15.5
4
9 131⁄422.8
¥ This fitting can be ordered without or with a Southern Raised Head Brass
Plug installed (2” through 8” available with plug).
69
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 82
Size
4
Test Tee with Internal Tap
E’
G
X
PART NO. SV 83
Straight Tapped Tee
Size
Weight
215⁄1677⁄81215.9
E’
G
X
Weight
2 x 11⁄22 61⁄48 5.5
2 x 2
2
61⁄48 6.0
3 x 11⁄221⁄27 9 7.4
3 x 2
21⁄27 9 8.5
4 x 2
3
7
9
12.3
4 x 3
4
8
11
14.0
4 x 4
3
7
9
15.0
5 x 2
31⁄27 9 13.5
5 x 4
31⁄281⁄21217.9
6 x 4
41⁄49 1324.4
PART NO. SV 84
Size
Sanitary Tapped Tee
E’
G
X
Weight
2 x 11⁄2213⁄1661⁄48 6.0
2 x 2
31⁄1661⁄48 5.8
3 x 11⁄235⁄167 9 8.0
3 x 2
39⁄167 9 8.1
4 x 11⁄2313⁄167 910.3
4 x 2
41⁄16
7
9
11.7
4 x 3
41⁄16 8 1113.6
70
Service Pipe and Fittings
PART NO. SV 85
Size
G
Tapped Wye
X
X’
Weight
3 x 2
5
101⁄265⁄810.3
4 x 11⁄241⁄29 61⁄211.0
4 x 2
41⁄49 612.7
PART NO. SV 89
Long Sanitary Tapped Tee
Size
2 x 2 x 18
E’
G
X
PART NO. SV 91
Sanitary Tapped Cross
Size
Weight
31⁄161618 8.8
E’
G
X
Weight
2 x 11⁄2213⁄1661⁄48 11.3
2 x 2
31⁄1661⁄48 6.7
3 x 2
39⁄167 9 9.0
4 x 2
41⁄167 9 11.6
PART NO. SV 92
Tapped Double Wye
Size
4 x 2
G
X
X’
Weight
53⁄41277⁄816.9
71
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 93
Tapped Cross
Size
3 x 2
4 x 2
E’
G
PART NO. SV 108
Straight Cross
Size
X
Weight
21⁄27 9 9.4
3
7
9
13.1
G
X
X’
Weight
4 x 2
7
9
3
16.0
4 811317.0
PART NO. SV 109
Sanitary Cross
Size
2
3 x 2
3
4 x 2
4 x 3
4
5 x 4
6 x 4
6
8
G
X
X’
Weight
61⁄4 823⁄410.0
7
9
4
12.5
71⁄210 4 15.6
7
9
41⁄216.0
71⁄2 1041⁄220.0
8
11
41⁄222.9
8
11
5
23.2
8
11
51⁄229.0
9
13
51⁄234.9
113⁄41765⁄8105.0
72
Service Pipe and Fittings
PART NO. SV 110
Double Wye
Size
2
3 x 2
3
4 x 2
4 x 3
4
5
6 x 3
6 x 4
6
8 x 4
8 x 6
8
10 x 6
10 x 8
10
12 x 6
12 x 8
12
15
G
X
X’
Weight
4
8
4
9.7
43⁄169 512.8
5
101⁄251⁄217.5
5
3 ⁄89 53⁄416.2
47⁄16101⁄261⁄419.8
51⁄412 63⁄427.2
51⁄2131⁄2 827.0
33⁄8101⁄273⁄424.6
43⁄1612 81⁄431.8
53⁄415 91⁄444.0
43⁄4131⁄291⁄244.5
65⁄16161⁄2101⁄257.3
711⁄16191⁄21113⁄1690.0
51⁄8161⁄2121⁄873.7
61⁄2191⁄2137⁄1699.0
8
221⁄2141⁄2172.0
511⁄1618 137⁄16112.0
711⁄1621 143⁄4135.0
101⁄827 167⁄8216.1
(XH)
(XH)
(XH)
(XH)
PART NO. SV 114
Sanitary Cross with 2” Side Inlet
Size
G
G’
X
X’
Weight
4891141⁄227.0
(XH)
Please see Extra Heavy dimensions
73
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 115
Double Wye with 2” Side Opening
Size
4 x 4
G
H
X
X’
Weight
51⁄410 12 63⁄431.8
PART NO. SV 135
Size
X
“H” Branch
X’
J
G
Weight
4 x 3 12 ⁄1679⁄16641⁄217.0
4 1315⁄16811⁄1661⁄251⁄419.6
3
PART NO. SV 137
Bar Grate with Legs
Size
G
4
3
X
Weight
43⁄42.0
PART NO. SV 141
45° Offset
Size/Offset
X
G’
J
Weight
4 x 4
4 x 6
4 x 8
11
13
15
4
4
4
4
6
8
11.6
15.0
15.6
74
Service Pipe and Fittings
PART NO. SV 143
Reducer
Size
3 x 2
4 x 2
4 x 3
5 x 2
5 x 3
5 x 4
6 x 2
6 x 3
6 x 4
6 x 5
8 x 3
8 x 4
8 x 5
8 x 6
10 x 4
10 x 5
10 x 6
10 x 8
12 x 4
12 x 6
12 x 8
12 x 10
15 x 6
15 x 8
15 x 10
15 x 12
X
PART NO. SV 144
Reducer Increaser
Size
X
9
9
9
9
12
9
12
12
2 x 4
3 x 4
4 x 5
4 x 6
4 x 8
5 x 6
6 x 8
8 x 10
Weight
43⁄44.6
5
6.0
5
7.0
5
6.6
5
6.8
5
9.0
5
8.2
5
9.9
5
10.4
5
10.9
6
14.3
6
16.6
6
16.4
6
16.8
6
20.0
6
38.0
6
24.0
6
26.5
61⁄232.2
61⁄234.4
61⁄237.2
61⁄238.4
61⁄252.3
61⁄255.0
61⁄255.7
61⁄264.9
Weight
9.4
8.8
11.3
15.2
24.5
12.8
24.0
44.0
75
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 147
Long Plain Increaser
Size
X
24
30
3 x 4 x 24
4 x 5 x 30
Weight
13.6
27.4
PART NO. SV 148
Long Tapped Increaser
Size
X
30
2 x 4 x 30
Weight
22.8
PART NO. SV 151
Tapped Spigot
Size AWeight
4 x 2
41⁄4
4.7
76
Service Pipe and Fittings
PART NO. SV 153
Double Hub Fitting
Size
2
3
4
6
8
10
12
15
X
(XH)(XH)
PART NO. SV 155
Pipe Plug
Size
2
3
4
5
6
8
10
12
15
Weight
11⁄44.2
11⁄47.0
11⁄29.1
11⁄213.1
11⁄222.1
11⁄236.3
11⁄246.3
X
Weight
31⁄21.3
33⁄42.5
4
4.1
4
6.0
4
8.0
41⁄212.4
41⁄217.7
51⁄423.3
(XH)(XH)
PART NO. SV 159
Vent Cap with Set Screw
Size Weight
4 2.6
PART NO. SV 169
“P” Trap
Size
2
3
4
5
6
8
(XH)
J
X
Weight
4 91⁄27.1
51⁄2 1213.1
61⁄2 1423.2
71⁄2151⁄230.4
81⁄2 1742.0
101⁄2221⁄1686.2
Please see Extra Heavy dimensions
77
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 170
Running Trap
Size
X
4
6
C
J
Weight
171⁄26 61⁄219.3
211⁄28 81⁄248.0
PART NO. SV 174
Running Trap with Single Hub Vent
Vent
Size Size
C
3
4
5
6
8
8
3
4
4
4
4
6
5
6
7
8
10
10
J
X
X’
Weight
51⁄21521⁄215.3
61⁄2171⁄2328.3
71⁄2191⁄231⁄239.7
81⁄2211⁄2445.9
11 275⁄851⁄495.9
11 275⁄851⁄4110.0
PART NO. SV 175
Running Trap
with Double Hub Vent
Vent
Size Size
C
3 3 5
4 4 6
5 4 7
6 4 8
6 6 8
8 4 10
8 6 10
10 8 12
12 10 15
15 12 181⁄2
J
X
X’
Weight
51⁄2 1521⁄223.0
61⁄2171⁄2336.3
71⁄2191⁄231⁄242.5
81⁄2211⁄2457.3
81⁄2211⁄2461.5
11 275⁄851⁄498.8
11 275⁄851⁄499.7
13 315⁄861⁄4187.0
15 383⁄471⁄4287.6
181⁄2
45
9 460.0
78
Service Pipe and Fittings
PART NO. SV 180
Deep Seal “P” Trap
Size
X
J
Weight
2 91⁄26 8.1
312714.3
414829.0
6
17 91⁄240.4
PART NO. SV 184(T)
Improved Running Trap with Double
Cleanout and Tee Branch
Vent
Size
SizeEGX X’Weight
4 3
51⁄461⁄4201⁄251⁄234.3
4 4 53⁄861⁄4201⁄251⁄233.7
PART NO. SV 188(T)
“P” Trap with Cleanout Right Side
Size
X
J
B
D
Weight
4 14 61⁄21151⁄220.0
PART NO. SV 188A(T)
“P” Trap with Cleanout Left Side
Size
X
J
B
D
Weight
4 14 61⁄21151⁄220.0
PART NO. SV 198
Size
2
3
4
(T)
“P” Trap with 1⁄2” Heel Tap
X
J
A
Weight
91⁄24 4 6.8
12
51⁄243⁄813.0
14
61⁄245⁄823.1
Note: 31⁄2” IPS tap
79
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 200
Closet Bend, Plain - Less Collar
Size
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3 x 4
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
A
6
6
6
6
8
10
10
10
10
12
12
16
18
16
4
4
4
4
6
6
6
6
8
8
10
10
10
10
12
12
12
12
14
14
16
16
18
B
12
15
16
18
18
12
15
16
18
12
18
16
18
16
12
14
16
18
12
15
16
18
16
18
12
15
16
18
12
14
16
18
16
18
16
18
18
Weight
11.3
12.0
12.0
13.0
14.0
13.0
13.0
17.5
16.0
15.9
19.0
20.6
22.7
16.7
12.3
11.0
14.3
17.1
12.5
15.0
16.9
14.0
18.4
19.8
15.3
18.0
19.6
19.0
14.0
14.0
20.8
19.0
22.6
24.0
23.8
24.7
27.4
80
Service Pipe and Fittings
PART NO. SV 206
Tapped Closet Bend with
Southern Code Brass Plug
Size
A
B
31⁄2 x 4 x 4 x 18
18
4
Weight
17.4
PART NO. SV 208
Hub-End Closet Bend, Low Hub
Size
A
4
4
4
4
B
Weight
45⁄81214.2
45⁄81415.4
45⁄81617.5
45⁄81818.9
PART NO. SPL 217
Offset Closet Flange (To Offset 1”)
Size
A
B
C
D
Weight
5
4 x 2
2
6
1
⁄8
4 x 21⁄221⁄273⁄161 5⁄8
4 x 4 ◊4 61⁄42 2
2.5
3.3
4.5
PART NO. SPL 219
Greensboro
Reducing Closet Flange
(Can be used to connect 4” fixture
with 3” line, or 4” No-Hub)
Size
4 x 3 x 3
A
B
Weight
31⁄873⁄16
3.7
◊ 2” Offset
81
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SPL 220*
Closet Flange, Notched and Slotted
Size
A
B
Weight
4 x 1
1
73⁄162.0
4 x 11⁄211⁄273⁄162.6
4 x 2
2
73⁄162.8
4 x 21⁄221⁄273⁄163.6
4 x 3
3
73⁄164.3
4 x 4
4
73⁄164.7
4 x 5
5
73⁄164.5
4 x 6
6
73⁄165.3
PART NO. SPL 225
Instant Set Closet Flange
Size AWeight
3 x 2†2
4 x 2‡
2
4 x 3§
3
4 x 4‡
4
3.5
5.6
3.0
4.0
* Caulk type to go over pipe.
† Four-bolt pattern. Test cap configuration not offered.
‡ Three-bolt pattern. Available with or without test cap.
§ Three-bolt reducing pattern, with test cap.
82
Service Pipe and Fittings
PART NO. SV 228
Iron Body Cleanout Ferrule, Body Only,
Less Brass Plug
and PART NO. SV 228S
Iron Body Cleanout Ferrule with Southern
Raised-Head Brass Plug Installed ¥
Size
Tap Size
A
Weight
2
11⁄231⁄21.3
3
21⁄233⁄42.0
4
3
41⁄43.6
5
4
41⁄44.5
6
5
41⁄45.2
8
6
41⁄211.7
10
6
41⁄216.3
12
6
51⁄425.5
(XH) (XH)(XH)
15
4 x 31⁄231⁄241⁄24.0
4 x 8
31⁄28 8.1
4 x 12
31⁄212 9.2
PART NO. SV 253
Sission Insertable Joint
Size
A
B
C
Weight
214 6 67.0
3
16
8
63⁄411.6
4 141⁄2 7
612.9
5 157⁄89 57⁄817.0
6 163⁄1681⁄2 620.4
8
18
10
63⁄4
37.0
PART NO. SV 458
Vented Closet Tee with 2” Top Vent
and 2” Extended Side Inlet
(Right Hand or Left Hand; Designed for use
below the floor; Fitting does not require a baffle)
Size A
BCDE
Weight
4x4x2x2x4 RH 11 41⁄253⁄1649⁄1643⁄1637.0
4x4x2x2x4 LH 11 41⁄253⁄1649⁄1643⁄1637.8
Please see Extra Heavy dimensions.
¥ This fitting not available with plug installed in 4 x 31⁄2 and 4 x 8 fitting sizes.
(XH)
83
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 459D
Vented Closet Cross with 2” Top Vent
and 2” Extended Side Inlet
(Designed for use below the floor;
Fitting does not have a baffle)
Size
A
4 x 4 x 2 x 2 x 4
11
B
C Weight
61⁄443⁄447.0
PART NO. SV 460
Vented Closet Tee with 2” Top Vent
and 2" Extended Side Inlet
(Right Hand or Left Hand; Designed for use
below the floor; Fitting does not require a baffle)
Size
A B
4 x 4 x 2 x 4 RH
4 x 4 x 2 x 4 LH
11
11
C Weight
41⁄253⁄1635.0
41⁄253⁄1635.0
PART NO. SV 463D
Vented Closet Cross with 2” Top Vent
and 2" Extended Side Inlet
(Designed for use below the floor;
Fitting does not have a baffle)
Size
A
4 x 4 x 2
11
B
C
PART NO. SV 566
Tapped Long Sweep Tee
Size
2 x 2
A
Weight
61⁄443⁄443.8
B
C
D
Weight
51⁄231⁄8 455⁄86.2
84
Service Pipe and Fittings
PART NO. SV 581
Double Sink Stack-1770
(Designed for use above the floor)
Size
3 x 2 x 2
A BC D E Weight
123⁄441⁄265⁄841⁄253⁄418.0
S
E
R
V
I
C
E
85
Service Pipe and Fittings
PART NO. SV 581
Double Sink Stack-1770
(Designed for use above the floor)
Size ABCD
Weight
4 x 2 x 2
121⁄25 71⁄241⁄221.4
86
Service Pipe and Fittings
PART NO. SV 973R
Right Hand Starter Fitting with 4” Tap and 2” Tapped “A” Side Inlet
(Designed for use above the floor with back-outlet water closets)
Size
Inlet
4
4
61⁄2
91⁄2
A
B
C
D
E
F
X
Weight
See Chart 61⁄24 41⁄164 4 25 34.8
See Chart 61⁄24 41⁄164 4 25 34.4
INLET
A
6 1⁄2
9 1⁄2
NOTES:
1. Single Vertical
R.H. Offset Back
Outlet Starter
Fitting
2.4”Stack with
2”Vent & Inlets
3. Face Plate
Package Not
Included
87
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 973L
Left Hand Starter Fitting with 4” Tap and 2” Tapped“A” Side Inlet
(Designed for use above the floor with back-outlet water closets)
Size
Inlet
4
4
61⁄2
91⁄2
A
B
C
D
E
F
X
Weight
See Chart 61⁄24 4 4 4 25 39.2
See Chart 61⁄24 4 4 4 25 39.0
INLET
A
6 1⁄2
9 1⁄2
NOTES:
1. Single Vertical
L.H. Offset Back
Outlet Starter
Fitting
2.4”Stack with
2”Vent & Inlets
3. Face Plate
Package Not
Included
88
Service Pipe and Fittings
PART NO. SV 974R
Right Hand Starter Fitting with 4” Hub and
2” Tapped “A” Side Inlet
(Designed for use above or in the floor with back-outlet
or bottom-outlet water closets)
Size
4 with A Inlet
A
BC D EF X Weight
61⁄261⁄261⁄241⁄164 4 25 39.2
INLET
A
6 1⁄2
89
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 974R
Right Hand Starter Fitting with 4” Hub and
2” Tapped “A” and “B” Side Inlets
(Designed for use above or in the floor with back-outlet
or bottom-outlet water closets)
Size
4 with A & B Inlets
ABCDXWeight
61⁄21861⁄261⁄225 46.2
FLOOR/CEILING
NOTES:
1. Single Vertical
R.H. Offset
Floor Starter
Fitting
2.4” Stack with
2” Vent & Inlets
3. Face Plate
Package Not
Included
INLET
A B
61⁄218
90
Service Pipe and Fittings
PART NO. SV 974L
Left Hand Starter Fitting with 4” Hub and
2” Tapped “A” Side Inlet
(Designed for use above or in the floor with back-outlet
or bottom-outlet water closets)
Size
4 with A Inlet
A B C D EF X Weight
61⁄261⁄261⁄2 4 441⁄1625 39.7
INLET
A
6 1⁄2
S
E
R
V
I
C
E
91
Service Pipe and Fittings
PART NO. SV 974L
Left Hand Starter Fitting with 4” Hub and
2” Tapped “A” and “B” Side Inlets
(Designed for use above or in the floor with back-outlet
or bottom-outlet water closets)
Size
4 with A & B Inlets
ABCDXWeight
61⁄21861⁄261⁄225 43.7
FLOOR/CEILING
NOTES:
1. Single Vertical
L.H. Offset
Floor Starter
Fitting
2.4” Stack with
2” Vent & Inlets
3. Face Plate
Package Not
Included
INLET
A B
1
6 ⁄218
92
Service Pipe and Fittings
PART NO. SV 975
Double Starter Fitting with 4” Tap and
2” Tapped “A” Side Inlet
(Designed for use above the floor with back-outlet
water closets; Fitting has a baffle)
Size
4 with A Inlet A B C D EF X Weight
91⁄261⁄2444
41⁄1625 42.5
INLET
A
9 1⁄2
NOTES:
1. Double Vertical
Offset Back
Outlet Starter
Fitting
2.4”Stack with
2” Vent & Inlets
3. Face Plate
Package Not
Included
93
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 976
Double Starter Fitting with 4” Hub and 2” Tapped “A” Side Inlet
(Designed for use above or in the floor with back-outlet
or bottom-outlet water closets; Fitting has a baffle)
Size
4 with A Inlet
A B C D EF X Weight
61⁄261⁄261⁄2 4 441⁄1625 50.8
INLET
A
6 1⁄2
94
Service Pipe and Fittings
PART NO. SV 976
Double Starter Fitting with 4” Hub and
2” Tapped “A” and “B” Side Inlets
(Designed for use above or in the floor with back-outlet or bottom-outlet
water closets; Fitting has a baffle)
Size
4 with A & B Inlets
A B C D E
XWeight
61⁄218 61⁄261⁄241⁄1625 56.6
FLOOR/CEILING
NOTES:
1. Double Vertical
Offset Floor
Outlet Starter
Fitting
2.4” Stack with
2” Vent & Inlets
3. Face Plate
Package Not
Included
INLET
A B
1
6 ⁄218
95
S
E
R
V
I
C
E
Service Pipe and Fittings
PART NO. SV 982
Size
A
18
2 x 2
Tapped By-Pass Vent Fitting
B
10
C
D
E
F
Weight
61⁄231⁄23 51⁄411.3
PART NO. SV 985
Size
2 x 2
Tapped Bath Vent Wye
A
B
C
D
Weight
4 ⁄165 31⁄421⁄28.4
1
96
Service Pipe and Fittings
PART NO. SV 1739R
Right Hand Vented Closet Tee with 2” 45° Taps
(Designed for use above the floor)
Size ABCDEFG
Weight
4 x 2 x 4 x 2
18
63⁄4
81⁄4
45⁄8
35⁄8
41⁄2
23⁄451.1
S
E
R
V
I
C
E
97
Service Pipe and Fittings
PART NO. SV 1739L
Left Hand Vented Closet Tee with 2” 45° Taps
(Designed for use above the floor)
Size ABCDEFG
Weight
4 x 2 x 4 x 2
18
63⁄4
81⁄4
45⁄8
98
35⁄8
41⁄2
23⁄451.0
Service Pipe and Fittings
PART NO. SV 1739 D
Vented Closet Cross with 2” 45° Taps
(Designed for use above the floor)
Size ABCDEFG
Weight
4 x 2 x 4 x 2
18
63⁄4
81⁄4
45⁄8
35⁄8
41⁄2
23⁄457.5
S
E
R
V
I
C
E
99
Service Pipe and Fittings
PART NO. SV 1801
Size
2 x 2 x 2
Tapped Harp Fitting
A
B
C Weight
117⁄16235⁄815.5
100
Service Pipe and Fittings
MULTI-STORY INSTALLATION
➀
➁
③
④
➄
SV 1739 Left Hand Vented Closet Tee
with 2” 45° Taps
SV 1801 2x2x2 Tapped Harp Fitting
SV 83 5x2 Straight Tapped Tee
5x10 SV Single Hub Pipe
4x10 SV Single Hub Pipe
SV 206 4x4x18 Tapped Closet Bend with
Southern Code Brass Plug
101
S
E
R
V
I
C
E
Service Pipe and Fittings
MULTI-STORY INSTALLATION
➀
➁
③
④
SV 581 4x2x2 Double Sink Stack — 1770
SV 83 3x2 Straight Tapped Tee
3x10 Single Hub Pipe
4x10 Single Hub Pipe
102
Extra Heavy
F
1/8
S
E
X
T
R
A
R
G
P
T
Y
A
J
B
Laying Length
(Telescoping Length)
PIPE - EXTRA-HEAVY*
Telescoping
Hub
Barrel
Nominal
Length
I.D.O.D.I.D.
Thickness
Size
Y
A
J
B
T
2” 2.50 3.062.382.000.19
3” 2.75 4.193.503.000.25
4” 3.00 5.194.504.000.25
5” 3.00 6.195.505.000.25
6” 3.00 7.196.506.000.25
8” 3.50 9.508.628.000.31
10” 3.50 11.6210.75 10.00 0.37
12” 4.25 13.7512.75 12.00 0.37
15” 4.25 16.9515.88 15.00 0.44
FIVE FOOT PIPE BUNDLES
EXTRA HEAVY WEIGHT
Single
Hub
Double
Hub
SIZE
PIECES
WEIGHT HEIGHT
2” 84 209918”
3” 45 199820”
4” 33 196821”
5” 23 169525”
6” 18 146523”
8” 11 155224”
10” 8 157429”
12” 6 147129”
15” 2 70020”
2” 84 220723”
3” 45 200724”
4” 33 199225”
5” 23 184729”
6” 18 153528”
* For additional dimensional information please see the Cast Iron Technical
and Installation Manual.
103
H
E
A
V
Y
Extra Heavy Pipe and Fittings
30” SINGLE HUB PIPE BUNDLES
EXTRA HEAVY WEIGHT
30”
Single
Hub
SIZE
PIECES
8 x 30”11
10 x 30”8
12 x 30”6
15 x 30”2
WEIGHT HEIGHT
WEIGHT HEIGHT
835
901
816
394
26”
24”
30”
19”
TEN FOOT PIPE BUNDLES
EXTRA HEAVY WEIGHT
Single
Hub
SIZE
PIECES
2 x 10’48 217312”
3 x 10’30 251715”
4 x 10’24 251718”
5 x 10’21 282020”
6 x 10’12 187916”
8 x 10’ 8 196821”
10 x 10’6 225225”
12 x 10’3 141315”
15 x 10’2 135320”
PART NO. XH 1
Pipe, 5’ Lengths, Single Hub
SizeLWeight
2” x 5’5’25.0
3” x 5’5’44.4
4” x 5’5’59.6
5” x 5’5’73.7
6” x 5’5’81.4
8” x 5’5’141.1
10” x 5’5’196.7
12” x 5’5’245.2
15” x 5’5’350.0
Weights are approximate and are for shipping purposes only.
104
Extra Heavy Pipe and Fittings
PART NO. XH 1A
Pipe, 30” Lengths, Single Hub
Size LWeight
8” x 30”30”75.9
10” x 30”30”112.6
12” x 30”30”136.0
15” x 30”30”197.0
PART NO. XH 2
Pipe, 5’ Lengths, Double Hub
SizeL Weight
2” x 5’4’ 91⁄2”26.3
3” x 5’4’ 91⁄4”44.6
4” x 5’4’ 9”60.4
5” x 5’4’ 9”80.3
6” x 5’4’ 9”85.3
PART NO. XH 3
Pipe, 10’ Lengths, Single Hub
SizeL Weight
2” x 10’10’45.3
3” x 10’10’83.9
4” x 10’10’104.9
5” x 10’10’134.3
6” x 10’10’156.6
8” x 10’10’246.1
10” x 10’10’375.4
12” x 10’10’471.0
15” x 10’10’676.4
105
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 4
Pipe, 30” Lengths, Double Hub
Size LWeight
2” x 30”25”15.0
3” x 30”241⁄2”26.0
4” x 30”24”33.0
PART NO. XH 900
Extra Heavy Charlotte Seal Gasket
Size
A
D
F
G
H
A
D
H
Weight
2 31⁄223⁄829⁄3233⁄1617⁄80.3
3 415⁄1631⁄231⁄241⁄221⁄40.4
4 53⁄447⁄32413⁄3257⁄1621⁄40.6
5 63⁄451⁄251⁄263⁄1621⁄20.7
6 8 61⁄261⁄273⁄821⁄20.9
8 10 81⁄285⁄1691⁄23 1.6
10 121⁄2103⁄41011⁄32111⁄23 2.0
12 147⁄16125⁄8125⁄8
1432.8
F
G
PART NO. XH 950
Extra Heavy Quick-Tite Gasket
A
D
Size
A
D
F
G
H
Weight
4 6 ⁄84 ⁄44 ⁄325 ⁄161 ⁄160.6
15 173⁄41513⁄3215 167⁄831⁄45.0
1
1
13
11
13
106
H
F
G
Extra Heavy Pipe and Fittings
PART NO. XH 5
Quarter Bend
Size
D
X
Weight
2
6 3 ⁄46.3
37411.1
4
8 41⁄215.5
1
5 8 ⁄2 518.5
6
9 51⁄225.8
8 111⁄265⁄847.0
10 121⁄275⁄880.0
12
15 83⁄4142.0
15 161⁄2101⁄4173.9
1
PART NO. XH 7
Size
2
3
4
6
Sixth Bend
D
X
Weight
43⁄42 6.0
51⁄221⁄27.2
65⁄16213⁄1614.0
67⁄833⁄821.0
107
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 8
Eighth Bend
Size
D
X
Weight
2 41⁄411⁄24.7
3 415⁄16115⁄168.8
4 511⁄1623⁄1612.4
5 57⁄823⁄815.0
6 61⁄1629⁄1618.9
8
8 31⁄836.2
10 83⁄831⁄259.7
12 105⁄1641⁄1690.0
15 1015⁄16411⁄16122.0
PART NO. XH 9
Sixteenth Bend
Size
2
3
4
5
6
8
10
12
15
D
X
Weight
7
35⁄8
⁄84.6
43⁄1613⁄169.1
413⁄1615⁄169.5
47⁄813⁄813.8
5 11⁄216.0
611⁄16113⁄1631.8
67⁄8253.0
85⁄823⁄865.0
87⁄825⁄8103.0
PART NO. XH 26
Long Eighth Bend
Size
D
4 x 18
18
X
Weight
23⁄1626.0
108
Extra Heavy Pipe and Fittings
PART NO. XH 29
Size
Short Sweep Bend
D
X
Weight
2
8 51⁄47.2
39613.0
4
10 61⁄218.2
5 101⁄27 23.8
6
11 71⁄228.4
8 131⁄285⁄857.0
10 141⁄295⁄890.0
12
17 103⁄4136.0
PART NO. XH 30
Size
Long Sweep Bend
D
X
Weight
2
11 81⁄49.0
312916.6
4
13 91⁄223.6
5 131⁄210 30.0
6
14 101⁄238.2
8 161⁄2115⁄858.6
10 171⁄2125⁄8109.0
12
20 133⁄4136.0
15 211⁄2151⁄4213.3
109
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 33
Combination Wye & Eighth Bend
(Long Turn Pattern)
Size
G
H
X
X’
Weight
2 x 2
4
33⁄8 847⁄89.7
3 x 2 43⁄164 953⁄416.0
3 x 3
5
51⁄16101⁄27 18.2
4 x 2 311⁄1641⁄2 961⁄418.9
4 x 3 41⁄259⁄16101⁄271⁄222.0
4 x 4 41⁄271⁄212 928.1
5 x 4 41⁄475⁄161291⁄229.3
5 x 5 51⁄285⁄8131⁄211 33.7
6 x 2 211⁄1651⁄2 971⁄422.0
6 x 3 31⁄869⁄16101⁄281⁄230.4
6 x 4 41⁄4713⁄1612 10 38.5
6 x 6 53⁄4105⁄1615127⁄853.5
8 x 4 43⁄4813⁄16131⁄211 54.0
8 x 6 65⁄16115⁄16161⁄2137⁄870.5
8 x 8 711⁄16137⁄8191⁄2 17107.4
PART NO. XH 35F
Double Combination Wye & Eighth Bend
(Long Turn Pattern)
Size
4 x 4
6 x 4
G
H
X
X’
Weight
51⁄4613⁄1612 9 44.0
41⁄4713⁄1612 10 43.0
110
Extra Heavy Pipe and Fittings
PART NO. XH 43
Sanitary Tee
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 5
6 x 3
6 x 4
6 x 6
8 x 4
8 x 6
8 x 8
10 x 6
10 x 8
10 x 10
12 x 8
12 x 12
15 x 8
15 x 15
G
X
X’
Weight
61⁄48 27⁄88.7
7
9
4
14.2
71⁄210 4 17.1
7
9
41⁄217.4
1
7 ⁄210 41⁄218.3
8
11
41⁄222.5
1
8 ⁄212 5 28.0
71⁄210 51⁄224.4
8
11
51⁄228.0
9
13
51⁄235.4
3
9 ⁄413 61⁄251.0
103⁄415 61⁄254.5
113⁄417 65⁄872.0
103⁄415 71⁄277.0
113⁄417 75⁄895.0
123⁄419 75⁄8115.0
13
181⁄285⁄8126.0
15
221⁄283⁄4173.0
13
181⁄2101⁄8180.0
161⁄2251⁄2101⁄4280.0
111
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 44
Size
2 x 2
3 x 2
3 x 3
4 x 2
4 x 3
4 x 4
5 x 3
5 x 4
5 x 5
6 x 3
6 x 4
6 x 5
6 x 6
8 x 4
8 x 6
8 x 8
10 x 4
10 x 6
10 x 8
10 x 10
12 x 6
12 x 8
12 x 10
12 x 12
15 x 4
15 x 8
15 x 10
15 x 12
15 x 15
G
Wye
X
X’
Weight
4
8
4
9.0
43⁄169 5 13.2
5
101⁄251⁄217.2
35⁄89 53⁄416.8
47⁄16101⁄261⁄420.6
51⁄412 63⁄423.7
37⁄8101⁄27 23.7
411⁄1612 71⁄228.3
51⁄2131⁄28 31.6
33⁄8101⁄273⁄426.8
43⁄1612 81⁄431.9
415⁄16131⁄283⁄433.8
53⁄415 91⁄441.2
43⁄4131⁄291⁄250.2
65⁄16161⁄2101⁄261.5
711⁄16191⁄21113⁄1686.6
39⁄16131⁄2111⁄872.0
51⁄8161⁄2121⁄884.0
61⁄2191⁄2137⁄16101.7
8
221⁄2141⁄2137.0
511⁄1618 137⁄16108.0
71⁄1621 143⁄4140.0
89⁄16241513⁄16180.0
101⁄827 167⁄8198.0
67⁄815 15 153.0
53⁄821171⁄16219.0
67⁄824 181⁄8229.0
87⁄1627 193⁄16236.0
103⁄4311⁄2203⁄4309.4
112
Extra Heavy Pipe and Fittings
PART NO. XH 79
Washington Test Tee
IPS
Size Tap
3
4
5
6
8
E’
G
X
Weight
4 27⁄871⁄8103⁄413.9
4 31⁄471⁄4105⁄819.9
5 35⁄8 7 1124.4
6 4
83⁄4 1342.2
8 5
11 163⁄858.5
PART NO. XH 80
Cleanout Tee with Brass Plug
Size
3
4
5
6
IPS
Tap
E’
G
X
Weight
2 21⁄27 9 11.3
3 3
8
11 15.5
4 31⁄281⁄212 22.9
4 41⁄49 1326.9
PART NO. XH 81S
Miami Test Tee
Size
IPS
Tap
E’
G
X
Weight
44371⁄4 1116.0
113
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 84
Sanitary Tapped Tee
Size
E’
G
X
Weight
4 x 2
41⁄16
7
9
14.3
X’
Weight
PART NO. XH 85
Tapped Wye
Size
4 x 2
G
X
41⁄49 6 13.8
PART NO. XH 109
Sanitary Cross
Size
G
4
8
X
11
X’
Weight
41⁄227.0
114
Extra Heavy Pipe and Fittings
PART NO. XH 110
Double Wye
Size
2
4 x 3
4
6 x 4
6
8
10
12
15
G
X
Weight
4
8
4
13.1
47⁄16101⁄261⁄426.9
51⁄412 63⁄428.2
43⁄1612 81⁄439.8
53⁄415 91⁄445.0
711⁄16191⁄21113⁄16119.0
8
221⁄2141⁄2182.0
101⁄827 167⁄8295.0
103⁄4311⁄2 22384.8
PART NO. XH 143
Reducer
Size
X’
3 x 2
4 x 2
4 x 3
5 x 3
5 x 4
6 x 3
6 x 4
6 x 5
8 x 4
8 x 5
8 x 6
10 x 4
10 x 6
10 x 8
12 x 4
12 x 6
12 x 8
12 x 10
15 x 8
15 x 10
15 x 12
X
Weight
43⁄46.0
5
7.0
5
8.9
5
11.0
5
11.0
5
12.0
5
12.2
5
12.6
6
19.1
6
19.5
6
19.0
6
28.0
6
30.0
6
35.0
61⁄236.8
61⁄246.0
61⁄243.0
61⁄250.0
61⁄255.5
61⁄257.0
61⁄262.0
115
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 144
Reducer Increaser
Size
X
9
12
4 x 6
6 x 8
PART NO. XH 153
Double Hub Fitting
Size
2
4
5
6
8
10
12
15
X
2
4
6
8
10
12
15
15.8
33.8
Weight
11⁄45.0
11⁄29.4
11⁄212.0
11⁄214.0
11⁄228.0
11⁄243.0
11⁄254.0
11⁄280.0
PART NO. XH 155
Pipe Plug
Size
Weight
X
Weight
31⁄21.4
4
4.7
4
8.0
41⁄215.0
41⁄229.0
51⁄432.0
51⁄444.0
116
Extra Heavy Pipe and Fittings
PART NO. XH 169
“P” Trap
Size
J
2
3
4
6
8
X
Weight
4 91⁄27.9
51⁄21217.2
61⁄21427.2
81⁄21745.2
101⁄2221⁄16120.0
PART NO. XH 174
Running Trap with Single Hub Vent
Vent
Size Size C
3
4
5
6
3
4
4
4
5
6
7
8
J
X
X’
Weight
51⁄215 21⁄222.8
61⁄2171⁄23 35.6
71⁄2191⁄231⁄246.0
81⁄2211⁄24 59.0
PART NO. XH 175
Running Trap
with Double Hub Vent
Vent
Size Size C
3
4
5
6
6
8
8
10
12
3
4
4
4
6
4
6
8
6
5
6
7
8
8
10
10
12
15
J
X
X’
Weight
51⁄215 21⁄230.0
61⁄2171⁄2337.4
71⁄2191⁄231⁄250.0
81⁄2211⁄2465.5
81⁄2211⁄2471.0
11 275⁄851⁄4127.0
11 275⁄851⁄4119.6
13 315⁄861⁄4193.0
15 383⁄471⁄4274.0
117
E
X
T
R
A
H
E
A
V
Y
Extra Heavy Pipe and Fittings
PART NO. XH 180
Deep Seal “P” Trap
Size
X
2
3
4
J
Weight
91⁄26 9.8
12
7
20.3
14
8
29.0
PART NO. XH 184(T)
Improved Running Trap with Double
Cleanout and Tee Branch
Vent
Size
Size EGX X’
Weight
4
4
3
51⁄461⁄4201⁄251⁄241.8
4 53⁄861⁄4201⁄251⁄242.9
PART NO. XH 198
Size
2
3
4
(T)
“P” Trap with 1⁄2” Heel Tap
X
J
A
Weight
91⁄2449.0
12
51⁄243⁄817.0
14
61⁄245⁄827.0
Note: 31⁄2” IPS tap
118
Extra Heavy Pipe and Fittings
PART NO. XH 230
Size
Iron Body Cleanout,
Body Only, Less Brass Plug
Tap Size
A
Weight
2(S)11⁄231⁄21.7
3(S)21⁄233⁄43.2
4 31⁄241⁄44.3
5(S)441⁄46.5
6
5 41⁄46.6
8
6 41⁄213.1
10
6 41⁄221.0
12
6 51⁄438.0
15
6 51⁄4
52.8
PART NO. XH 253
Size
4
6
Sission Insertable Joint
A
B
PART NO. XH 549
Roof Iron
Size
C
Weight
141⁄2 7 617.1
163⁄1681⁄2626.2
A
B
C
D
E Weight
4 107⁄1653⁄8413⁄1633⁄1621⁄28.2
(S)
Size available only with Southern Raised-Head Brass Plug installed
119
E
X
T
R
A
H
E
A
V
Y
Plugs
PART NO. PLG 410
Ohio Code Brass Plug
Size
10
D
H
Weight
1023⁄3221⁄3210.6
PART NO. PLG 430
Southern Code Brass Plug
Size
D
H
Weight
49
11⁄2157⁄64
⁄640.2
49
2
223⁄64
⁄640.3
51
21⁄2255⁄64
⁄640.4
57
3
315⁄32
⁄640.6
57
31⁄2363⁄64
⁄640.7
61
4
431⁄64
⁄641.1
61
5
535⁄64
⁄641.5
6
619⁄3217⁄322.5
8
839⁄6419⁄324.0
PART NO. PLG 440
Southern Code Countersunk Brass Plug
Size
D
11⁄2157⁄64
2
223⁄64
3
315⁄32
31⁄2363⁄64
4
431⁄64
5
535⁄64
6
619⁄32
H
PART NO. PLG 450
Cast Iron Plug
Size
D
Weight
⁄320.2
7
⁄160.3
33
⁄640.6
33
⁄640.8
35
⁄640.9
11
⁄161.7
11
⁄162.3
13
H
Weight
6 635⁄64117⁄644.2
10 1039⁄64131⁄329.0
120
This is to verify that products manufactured by Charlotte Pipe
and Foundry, Cast Iron Division, are manufactured in the United
States and conform to the following standards:
SERVICE HUB AND SPIGOT PIPE AND FITTINGS
All cast iron soil pipe and fittings shall be marked with the collective
trademark of the Cast Iron Soil Pipe Institute (CISPI).
ASTM A 74
ANSI A 112.5.1
Listed by NSF® International
ISO 9001:2008 Certified
EXTRA HEAVY HUB AND SPIGOT PIPE AND FITTINGS
All cast iron soil pipe and fittings shall be marked with the collective
trademark of the Cast Iron Soil Pipe Institute (CISPI).
ASTM A 74
ANSI A 112.5.1
Listed by NSF® International
ISO 9001:2008 Certified
HUBLESS PIPE AND FITTINGS
All cast iron soil pipe and fittings shall be marked with the collective
trademark of the Cast Iron Soil Pipe Institute (CISPI).
CISPI Standard 301
ASTM A 888
Listed by NSF® International
ISO 9001:2008 Certified
HUBLESS COUPLINGS
CISPI Standard 310
ASTM C 1277
Certified by NSF® International
HUBLESS HEAVY DUTY COUPLINGS
Meets ASTM C 1540
COMPRESSION GASKETS
ASTM C 564
CISPI HSN 85
121
P
L
U
G
S
This catalog accurately reflects dimensional information to the
best of our knowledge. If dimensions on your job are critical,
please verify dimensional information with our factory.
This dimensional catalog accurately reflects our product line at
the time the catalog was printed. However, we add and delete
items on an ongoing basis to better serve our customers. Please
refer to our current list price sheets for an accurate listing of
items offered.
Charlotte Pipe® products are manufactured to the applicable
ASTM standard. Charlotte Pipe and Foundry cannot accept
responsibility for the performance, dimensional accuracy,
or compatibility of pipe, fittings, gaskets, or couplings not
manufactured or sold by Charlotte Pipe and Foundry.
122
LIMITED WARRANTY
Charlotte Pipe and Foundry Company® (Charlotte Pipe®) Products are warranted to be free from
manufacturing defects and to conform to currently applicable ASTM standards for a period of
five (5) years from date of delivery. Buyer’s remedy for breach of this warranty is limited to
replacement of, or credit for, the defective product. This warranty excludes any expense for removal
or reinstallation of any defective product and any other incidental, consequential, or punitive
damages. This limited warranty is the only warranty made by seller and is expressly in lieu
of all other warranties, express and implied, including any warranties of merchantability
and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe
or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty.
This Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe.
This Limited Warranty will not apply if:
1) The Products are used for purposes other than their intended purpose as defined by local
plumbing and building codes, and the applicable ASTM standard.
2) The Products are not installed in good and workmanlike manner consistent with normal
industry standards; installed in compliance with the latest instructions published by Charlotte
Pipe and good plumbing practices; and installed in conformance with all applicable plumbing,
fire and building code requirements.
3) This limited warranty does not apply when the products of Charlotte Pipe are used with the
products of other manufacturers that do not meet the applicable ASTM or CISPI standards
or that are not marked in a manner to indicate the entity that manufactured them.
4) The Products fail due to defects or deficiencies in design, engineering, or installation of the
piping system of which they are a part.
5) The Products have been the subject of modification; misuse; misapplication; improper
maintenance or repair; damage caused by the fault or negligence of anyone other than
Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe.
6) The Products fail due to the freezing of water in the Products.
7) The Products fail due to contact with chemical agents, fire stopping materials, thread sealant,
plasticized vinyl products, or other aggressive chemical agents that are not compatible.
8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the
surface of Charlotte® PVC, ABS or CPVC products with solvent cement or adhesive glue.
Charlotte Pipe products are manufactured to the applicable ASTM or CISPI standard. Charlotte
Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or
compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe
and Foundry.
Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at
the following address for verification, inspection and determination of cause:
Charlotte Pipe and Foundry Company
Attention: Technical Services
2109 Randolph Road
Charlotte, North Carolina 28207
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC / Cast Iron pipe or fittings can result in explosive
failures and cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS /
CPVC / Cast Iron pipe or fittings.
• NEVER test PVC / ABS / CPVC / Cast Iron
pipe or fittings with compressed air or
gas, or air over water boosters.
• ONLY use PVC / ABS / CPVC / Cast Iron
pipe or fittings for water or approved
chemicals.
• Refer to warnings in PPFA User Bulletin
4-80 and ASTM D 1785.
Purchaser must obtain a return materials
authorization and instructions for return
shipment to Charlotte Pipe of any product
claimed defective or shipped in error.
Any Charlotte Pipe product proved to be
defective in manufacture will be replaced
F.O.B. point of original delivery, or credit
will be issued, at the discretion of Charlotte
Pipe.
4/15/10
Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company.
123
W
A
R
R
A
N
T
Y
PO BOX 35430
CHARLOTTE
NORTH CAROLINA 28235
PHONE
(704) 348-6450
(800) 438-6091
FAX
(800) 553-1605
LITERATURE BY FAX (800) 745-9382
WWW.CHARLOTTEPIPE.COM

Download Report