HAWLE-FIT

HAWLE-FIT
Range
HAWLE-FIT
The new generation of pipe fittings
No. 6120HF
No. 6430HF
with external thread
Elbow 90° with internal thread
No. 6220HF
No. 6320HF
with internal thread
Connector
No. 6420HF
No. 6520HF
Elbow 90°
T-piece with threaded outlet
Illustrations, technical data, dimensions and weights
are subject to alteration without notice.
Edition 10. 2010
Art.-Nr. ZA35000002
distributed by:
E. Hawle Armaturenwerke GmbH
A-4840 Vöcklabruck - AUSTRIA
Wagrainer Straße 13
www.hawle.at
Telefon:+43 (0)7672 725 76-0
Telefax: +43 (0)7672 784 64
E-mail: [email protected]
HAWLE. MADE FOR GENERATIONS.
Hawle-FIT
Hawle-FIT
The new generation of pipe fittings
Compact and functional design
The new generation of pipe fittings is
The stainless steel reinforcing ring
The new generation of fitting pipes
designed for drinking water applica-
prevents the fitting from bursting open
HAWLE-FIT is supplied ready for
tions within a temperature range of up
in the event of internal thread overload.
installation which means: no screwing
to 30° C.
This reinforcing ring represents an
on is required before inserting the pipe!
important safety factor since it offers
The fitting is unpacked and is then
protection from water loss (long-term
ready for use (ill. 1).
effect …).
The new generation of pipe fittings
Installation and dismantling is simple
with no special tools required.
Compact and
functional design
The innovative design of the new
HAWLE generation of fittings is enhanced by the use of highest quality
1
2
HAWLE-FIT can be assembled without
The new generation of fitting pipes
any pipe chamfering and they feature
HAWLE-FIT has been designed to
built-in end stops. This saves time and
connect PE pipes with an outside
money (ill. 2/3).
diameter of d 25 to d 63 and a
Before assembly, the grip ring does
working pressure of up to 16 bar.
not reveal any initial tension/prestress
3
inwards. For this reason only very low
polymers.
insertion forces are required.
The new HAWLE-FIT offers optimum
The construction of the new generation
toughness and strength properties.
of pipe fittings HAWLE-FIT simplifies the
The concentration of tightening forces
dismantling of the pipe since the fitting
around the clamping nut are easily
does not have to be completely dis-
handled by the unique combination of
mantled. The clamping nut is loosened
quality materials.
but not actually removed. (ill. 4).
4
1
The special clamp toothing (no continuous groove) reduces the impact
Clamping nut
open
2
Simple installation and
high operational reliability
force on the pipe. This significantly
enhances the service life of the pipe.
Clamping nut fully
tightened
2 | HAWLE
2|
HAWLE | 3
3|

Download Report