PRODUCTS SPECIFICATION

SHENZHEN MYLEDY CO., LTD
MMMJNCD;LCJOIN
PRODUCTS SPECIFICATION
5050 SMD LED FLEX STRIP:
(Ribbon series)
For LD-FL-R5050RGB-12-30
Made by
Checked by
kevin
Mark
Pb
Version
2013.07.2
IP20
SHENZHEN MYLEDY CO., LTD
Phone :+86-755-82597382
Fax :+86-755-23065612
Address : Building B,Chuangfu Industrial park,Bei huan Road, Shiyan,BaoAn , Shenzhen,China
website : www.myledy.com
Page:1/6
LEDMY SPECIFICATION
5050 SMD FLEXIBLE STRIP introduction
Features:
Available in 12V DC maximum
Very bright & low power consumption
Operating temperature: -20°~50 °
Long life span LED lights, more than 50,000 hours+.
Adhesive back, peel& stick!
Dedicated controller (DC12)
Non-water-proof, IP20.
Applications:
Ideal for sign letters and channel letters, concealed lights, room lighting, equipment.
RGB type
Page: 2/6
Monochrome type
LEDMY SPECIFICATION
Assembly drawing
100mm
View Angle: 120degrees
Operation Temperature:-20℃
℃~50℃
℃
Store Temperature:-30℃
℃~80℃
℃
Package: 5 meter strip in one reel, one reel in one anti-Static bag, 25 bags put into one carton.
Page: 3/6
LEDMY SPECIFICATION
5050 Ribbon series: 30/60LED/Meter
100mm
100mm
This flexible strip is made of 5050(3in1) LED; the PCB holder is Ribbon strip.
Lumen
Lumen
Lumen
(CRI<80)
(CRI>80)
(CRI>90)
6000K
540lm
480lm
375lm
LD-FLW-R5050W-12/24-30S-AAA
6000K
600lm
495lm
405lm
LD-FLW-R5050W-12/24-30S-AA
3000K
450lm
375lm
300lm
LD-FLW-R5050W-12/24-30S-AAA
3000K
495lm
425lm
360lm
Model
Color
LD-FLW-R5050W-12/24-30S-AA
Page: 4/6
LEDMY SPECIFICATION
Page: 5/6
LEDMY SPECIFICATION
How to connect flexible strip
Below shows you how to connect the flexible strip (monochrome) to power
supplies.
Marks:
1. Maximum 5meter/link/loop.
2. Better to supply the power through both
of the each link.
3. Flexible strip should be installed in a
proportional spacing to evenly.
4. Power supply should be DC 12V.
5. Be sure the positive and negative are not
reversed.
Below shows you how to connect the flexible strip (RGB) to power supplies.
Marks:
1. Maximum 5meter/link/loop.
2. Better to supply the power through
both of the each link.
3. Flexible strip should be installed in a
proportional spacing to evenly.
4. Power supply should be DC 12V.
5. Be sure the positive and negative are
not reversed.
Page: 6/6

Download Report