24V RGB LOW VOLTAGE STRIP LIGHTS Product Description Project High Density, Water & Humidity Resistant, 16.4 ft. Spool, with 300 LED SMD 5050 High Performance/Low Energy Chips, 24 Volts, Cuttable every 2 inches, 3M Adhesive Backing, PU/Silicone Coating. Location Available in: Model # • RGB (Multi-Color) 24305RGB Prepared by Comments Product Features • 16.4 ft spool • Cuttable every 2” / 3 chips • 50,000 hours rated life • Silicone/polyurethane coated for water and humidity protection • Up to two rolls (32.8 ft.) can be connected in series • Can be used with 3 options of power source: -Desktop Adapter PA2496W2 (indoor use) -Meanwell Power Driver (indoor/outdoor use) -Dimmable Magnetic Driver (indoor) • Free of projected heat, UV and IR radiation • UL rated • 3 year limited warranty Lumilum www.lumilum.com Phone: (855) LUM-ILUM / (855) 586-4586 Email: [email protected] Technical Specs: • 24 Volts DC. Power Adapter or Driver required • 72 Watts (4.39 watts/foot = 14.4 Watts/meter) • Current per reel = 3 A • Water Resistant rated IP54 • Width: 0.39” (10mm) • Height: 0.08” (2mm) • Length: 16.4ft (5 meters) • LED spacing: 0.66” (16.7mm) • 18 LED diodes per ft • Can be cut in segments every 3 LED chips across copper connectors; cutting increment: 1.97” (50 mm) • Beam angle 120° • Ambient operating temperature: ‐68°F to +176°F Corporate Office 12060 SW 129 Ct. Suite 101 Miami, FL 33186 Phone: (305) 233-2844 Performance Color Model Color Temp. Lumens/Ft. Power Consumption/Ft. RGB 24305RGB R=626nm G=525nm B=470nm R=51 G=127 B=39 4.39W/367mA RGB Remote Controllers Model: RC44KS05 Color Changing RGB IR Remote Controller 44 Keys RFCPRX53 Compact Radio Frequency Wireless RGB Controller RCTOSR01 RGB LED Controller Touch Series (Radio Frequency) RCATOSR3 RGB LED Controller Signal AMPLIFIER Touch Series Dimensions 4.92 x 2.21 x 1.18 in. 125 x 56 x 30 mm Receiver: 5.31 x 1.18 x .79 in. (135 x 30 x 20 mm) 8.13 x 5.35 x 1.69 in. 207 x 136 x 43 mm 2.87 x 3.05 x 1.30 in. 73 x 77 x 33 mm Controls color and brightness of RGB strip lights; easy to use and simple functionality to control color and brightness as well as color changing patterns and speed mode; can be easily connected directly to Lumilum RGB Strip Lights as well as to our Power Adapter. Ergonomically designed, this remote controller uses a touch wheel to generate color combinations and brightness control, as well as color changing patterns and speed mode. Works in conjunction with Touch Series Amplifier when strip light distance requires >16.4” Use this amplifier together with the RGB LED Controller ‐ Touch Series when you need to connect several strips together. This amplifier works to keep the remote controller signal strong over long distance. You will also need additional power sources for each stretch of strip. Supply Voltage: 12 ‐ 24V Supply Voltage: 12 ‐ 24V Supply Voltage: 12 ‐ 24V Color Combinations: 32 (20 static color modes, 6 DIY color modes, 6 dynamic changing modes) Color Combinations: 32 (20 static color modes, 6 DIY color modes, 6 dynamic changing modes) Color Combinations: 18 (7 static color modes, 11 dynamic changing modes, wheel controls 64 colors) Remote Control: 4.09 x 2.28 x .35 in. (104 x 58 x 9 mm) Description Controls color and brightness of RGB strip lights; easy to use and simple functionality to control color and brightness as well as color changing patterns and speed mode. Infrared technology. Accessories Model C12RGBBC RGB Strip Light Connector Clips Description Connector clips to copper connectors to unite two segments of strip light. Can be used with RGB strips. Works mechanically, can be soldered if required. Lumilum www.lumilum.com Phone: (855) LUM-ILUM / (855) 586-4586 Email: [email protected] Corporate Office 12060 SW 129 Ct. Suite 101 Miami, FL 33186 Phone: (305) 233-2844
© Copyright 2025 ExpyDoc