HPL-Series RVB-Series HEX-Series EVB-Series RSR

Recycling
Material-Handling
RSR-RCR Series
EVB-Series
Recycling
Recycling
HEX-Series
RVB-Series
HPL-Series
RSR Rotar Standard Rotator
EVB Rotar Segregator Bucket
HEX Rotar Cleaner
RVB Rotar Segregator Bucket
HPL Rotar Cleaner
Rotar designed some Standard Rotator Heads to be installed
on different kind of constructions, to be mounted with a
hammer top-plate on the excavator side. Specially designed
to be used with bucket kinematic. Standard integrated with
hydraulic swivel. Rotator is based on a bearing principle with
a hydraulic motor
4 sizes available for excavators of 13 up to 40 ton. Ideally to
clean construction- and demolition sites as well to screen or
clean roughly all kind of materials. Easy to install / easy to
operate.
A program of 5 different sizes suitable to excavators of 7 up to
35 ton. A multifunctional attachment for screening, washing,
mixing, separating etc. Ideally to screen demolition and
construction waste. Also for cleaning contaminated soils
5 different sizes are available for wheeled loaders of 4,5 up to
15 ton. Ideally to separate fast and easy all kind of materials.
To clean job sites or to screen (road) construction waste, it’s all
where this bucket is made for.
7 sizes will fit to wheeled loaders of 4 up to 20 ton. Suitable
for screening construction and demolition waste, compost,
cleaning of construction sites, beaches, graveyards etc.
•HD-construction
•Optional central greasing system
•Also available with bucket teeth’s
•Interchangeable insert screens (# 6-45 mm)
•Simple installation / operation
•Service friendly
•Extremely effective
•42 mm distance between vertical ribs
•Central greasing (optional)
•Simple installation / operation
•Removable side-plates
Typ RSR
Your local dealer:
Recycling
9
22*
28*
48*
Machine class (t)
Weight (kg)
Hole-pattern
5-9
10-22
20-28
25-48
140
215
300
350
110-120
130-140
140-150
140-150
•Interchangeable Insert screens (# 6-45 mm)
•Simple installation / operation
•Multifunctional attachment. (screening/mixing/washing)
* optional with 2 hydraulic motors
RCR Rotar Compact Rotator
ROTAR INTERNATIONAL BV
SCHERING 27 | 8281 JW GENEMUIDEN | NETHERLANDS
POSTBUS 174 | 8280 AD GENEMUIDEN | NETHERLANDS
The Rotar Compact Rotators are designed for single pin
mounted constructions, like orange peel grapples, wood
grapples etc. This rotator is also based on a bearing principle
with an external motor. Standard with integrated swivel. Easy
mounting – Easy to service.
Typ RCR
TEL. +31 (0) 38 385 5471 | FAX. +31 (0) 38 385 5402
20
25
E-MAIL: [email protected] | WWW.ROTAR.COM
* dynamic load
Your Attachment Supplier
Machine class (t)
Weight (kg)
Max. lifting (t)*
15-45
30-70
205
245
10
20
Typ HPL
Typ EVB
600 S
800 S
1200 S
1200 I
Machine class (t)
Weight (kg)
Capacity (l)
Distance between
ribs (mm)
13-16
15-25
21-35
24-40
1100
1475
1885
1900
600
800
1200
1200
45
45
45
80
* system protected by flow control valve
Your Attachment Supplier
Your Attachment Supplier
Typ HEX
350 M
700 S
850 S
1000 S
1400 S
Machine class (t)
Weight (kg)
Capacity (l)
Distance between
ribs (mm)
7-12
13-15
15-20
20-25
25-35
425
900
1200
1700
2150
350
650
870
1050
1450
45
45
60
60
60
* NEW EVO Operation system (no electric anymore)
Only grab/shear circuit reguired
Your Attachment Supplier
Typ RVB
800 S
950 S
1500 S
2000 S
2300 S
Machine class (t)
Weight (kg)
Capacity (l)
Bucket width
(mm)
4,5-7,5
6-9
7,5-10
10-12
12-15
860
950
1500
1800
2260
1025
1155
1650
2050
2225
2060
2320
2420
2650
2730
* system protected by flow control valve
Your Attachment Supplier
400 M
600 S
800 S
1500 S
2000 S
2500 I
3000 I
Machine class (t)
Weight (kg)
Capacity (l)
Distance between
ribs (mm)
4-6
5-7
6-10
10-13
12-16
15-18
17-20
385
675
875
1700
2200
2544
2780
400
600
800
1560
2000
2500
3000
45
45
45
45
45
60
60
* NEW EVO Operation system (no electric anymore)
Only one additional circuit reguired (reversible)
Your Attachment Supplier
Program
Your Attachment Supplier
Demolition
Material-Handling
Demolition
RHB-Series
RG-Series
Demolition
RDP-Series
Material-Handling
Scrap - metal
RDC-Series
RSS-Series
RPG-Series
Scrap - metal
RRC-Series
RHB Rotar Hydraulic Hammer
RSG Rotar Sorting-/ Demolition Grab
RDP Rotar Pulveriser
RDC Rotar Combi Shear
RSS Rotar Scrap Shear
RPG Rotar Polyp Grabs
RRC Rotar Rail Cutter
A new generation hydraulic breakers, who
deserve their excellent reputation by simplicity
and performance. They are one of the most silent
breakers and in line with the “Outdoor Equipment“
directive 2000/14/EU.
A heavy duty built grab line with a double framed main
housing and HD pivot groups. Suitable to excavators of 2 up
to 65 ton. 360° endless rota table and also available without
rotation. Standard fitted with interchangeable cutting edges
and a load control valve.
Recently Rotar extended their product line by 4 sizes of rota
table Pulverisers. A compact design creates an excellent
stability on the excavator. Built to be used for primary- as well
as secondary demolition.
A range of 4 different sizes is available for machines from 15
up to 65 ton. Because of the compact design, it’s the perfect
shear to be used on high reach machines. Built for primary
demolition of concrete / steel constructions.
Rotar develops a range of 5 models scrap shears suitable to
excavators of 20 up to 75 ton. Those shears can be mounted on
the mono boom as well as on the stick.
A full range of grabs are available with open / half open /
closed shells. Suitable to excavators of 16 upto 70 ton. 360°
endless rotation. Optional also in 4 tyne version available.
•Good penetration
•Fast cycle (open /close)
•Interchangeable wear parts (max. flexibility)
•360° Endless rota table
•Good penetration
•Fast cycle (open / close)
•Interchangeable wear parts (max flexibility)
•360° Endless rota table
•Excellent performance
•High value construction
•Unique piercing tip (max protection)
•Efficient hydraulic installation
•HD-construction
•Robust pivot groups
•Rotator head based on
bearring concept
Rotar extended their range of attachments with a Rail Cutter.
An extreme powerful shear, designed to cut Rail Tracks . Those
shears are used on scrap yards for recycling as well during
replacement operations in the field. A special design of the
jaws, with interchangeable blades, creates an easy cut.
* Power control: The blow frequence and impact energy can be adjusted
** Optional: a wide range of tools / original tool grease
Your Attachment Supplier
Typ RG
Machine class (t)
Weight (kg)
Capacity (l)
Closing force
kN.*
ss
2-5
5-9
10-15
14-18
16-22
20-28
25-37
35-48
210
425
850
950
1305
1550
1954
2285
100
140
325
400
530
620
875
1100
12
26
41
41
53
61
70
80
RG 5
RG 9
RG 12
RG 15
RG 22
RG 28
RG 37
RG 48
RG 60
45-60
3860
1500
* Closing force at 320 bar
115
Typ RDP
20
25
32
42
ss
is m o
Machine class (t)
Weight (kg)
Jaw opening
(mm)
Cutting force
(t)
15-25
22-35
32-50
45-65
2100
2765
3100
4500
845
974
1000
1230
62/100
70/107
95/152
105/195
* Cutting force at 350 bar
Your Attachment Supplier
Typ RDC
20
25
32
42
ss
is m o
Machine class (t)
Weight (kg)
Jaw opening (mm)
Cutting force
(t)
15-25
22-35
30-45
45-70
1950
2670
3050
4100
750
900
955
1230
63-80
68-100
85-125
102-140
* Cutting force at 350 bar
Your Attachment Supplier
Typ RSS
20
30
40
50
100
re
42
52
62
70
80
80
100
120
135
140
150
155
165
180
nab
tai i
sus
560 - 1700
670 - 1450
520 - 1150
530 - 1150
530 - 1050
590 - 1100
650 - 850
550 - 720
520 - 680
380 - 650
380 - 620
380 - 590
380 - 580
350 - 560
sus
117
166
233
284
380
550
800
1200
1500
1800
2200
2600
3000
4200
nab
tai i
•Extreme strong construction
•Strong hydraulic performance
•Unique blades solution
•360 ⁰ Rotation
lity
1,3 - 3,0
2,1 - 4,5
2,9 - 6,0
4,2 - 9,0
5,2 - 12,0
9,0 - 15
10 - 17
15 - 24
17 - 28
20 - 33
25 - 40
29 - 46
29 - 46
45 - 70
nab
tai i
le
Tool diameter
(mm)
lity
Blow
frequence
(bmp)
le
Weight (kg)
le
RHB 20
RHB 30
RHB 40
RHB 60
RHB 80
RHB 110
RHB 140
RHB 180
RHB 220
RHB 260*
RHB 300*
RHB 380*
RHB 460*
RHB 540*
Machine class (t)
lity
Type RHB
sus
Features:
Hybrid technology (gas/oil), highly efficient internal
control valve, Power stop function
re
* Extreme reliable
* Max. safety
* Long lasting
re
The RHB-breakers are standard fitted with a power
booster, which results in better performances.
is m o
Machine class (t)
Weight (kg)
Jaw opening (mm)
Cutting force
(t)
16-24
18-30
24-38
30-50
45-75
2470
3590
4440
6180
8250
445
607
760
782
947
531
644
813
955
1338
4-600
4-800
6-600
6-800
6-1000
Machine class (t)
16-30
16-30
30-50
30-50
30-50
Weight (kg) * Capacity (l)
1675
1725
1950
2030
2250
Max. load (t)
Rotator (t)
8
8
10
10
10
20
20
25
25
25
600
800
600
800
1000
* Weight based on half-open shells
- Pin adapter ø70 mm
* Cutting force at 350 bar
Your Attachment Supplier
Typ RPG
Your Attachment Supplier
Your Attachment Supplier
Typ RRC
20*
25
Machine class (t)
Weight (kg) *
Jaw opening
(mm)
Jaw Depth (mm)
15-25
25-38
2500
3500
*
204
*
111-190
* Under construction
Your Attachment Supplier

Download Report