AirQuality Limited: Gasmote-O3 (GSS) Ambient

Email: [email protected]
Web: airqualityltd.com
Ph:
+64 9 282 5275
ENVIRONMENTAL MONITORING
21 Barrys Point Road
Takapuna, 0622
Auckland, New Zealand
AirQuality Limited: Gasmote-O3 (GSS)
Ambient Ozone Monitoring
Automated ambient ozone measurement
utilizing gas sensitive semiconductor technology
The AirQuality Gasmote-O3 (GSS) continuous
GSS monitor uses advanced heated metal oxide
technologies in combination with data-logging,
communications and global positioning systems

Capable of high quality indicative O3 measurements

Continuous measurement, automated data
up-load

Long term, unattended operation

Low detection limit, high accuracy, low drift

SD Card memory for increased data security

Real-time on-line access to instrumental
data/diagnostics

Ability to set alarms (SMS, emails) when
limits are reached

Automatically records position/time so can be
readily relocated
Advanced measurement diagnostics, control and
zero checking provide a high level of measureEasily networked
ment reliability under challenging measurement
conditions.

An internal pump continuously draws air into the
sensor chamber where it contacts the semiconductor sensor.
The Gasmote-O3 (GSS) is designed to be run off
a permanent mains power connection but can also
be configured to run off portable power supplies
using batteries, solar, wind or a combination of
these options.
The Gasmote-O3 (GSS) is designed to operate as
a sensor network node, allowing network analysis
tools to provide real-time performance validation
with reference monitors.
The Gasmote-O3 (GSS) can be programmed to
send alarms (SMS or Email) when specific levels
are reached or diagnostic limits are detected.
AirQuality carefully review the data from each
instrument every day to ensure each instrument is
operating optimally.
Also ask about of Dustmote and Metmote
For the measurement of TSP, PM10 or PM2.5,
or wind speed and direction, air temperature
and humidity and are ideal companions to the
Gasmote-O3 (GSS).
Specifications : Standard

Sensor type
Gas sensitive semiconductor

Sensitivity
1 ppb

Sample period
1 minute

Active Sampling
Fan (50,000 hours)

Communications
UMTS/3G modem (other options available)

Data storage
2 GB SD card

Accuracy
range 0—150 ppb

Precision
8 ppb (from 0—100 ppb)

Ambient Temperature range
-5 deg to 40 deg C

Dimensions
180mm high, 180mm wide by 90mm deep

Power Consumption
10 W
Gasmote Options
Item
Code
Item
Code
External Lead acid battery
GM03-ESDC
Solar shield
GM03-SS
Solar Shield,
GM03-SS
Solar panel and bracket
GM03-SP
Advanced processing datalogger
GM03-APD
Wind generator
GM03-WG
External power cable
GM03-EPC
For more information, visit our website at www.airqualityltd.com
©2013 AirQuality Limited. All rights reserved.
Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for
details.
AirQuality Limited
21 Barry Point Road
Takapuna 0622
Auckland, New Zealand
Email:
[email protected]
[email protected]
[email protected]

Download Report