HOPPER + SUPER JOEY + JOEYs

TWO to FIVE TVs (All HD) - HOPPER + SUPER JOEY + JOEYs (3/13/2014)
EQUIPMENT AT THE TRIPOD
TV Connections not shown.
TO LNBFs
TO
CLIENT
TO SERVER
10.5-28V
TO
SERVER
Grounding wire size: Copper wire-8-14 AWG
Copper coated steel wire-17 AWG
75 ohm
Terminator
To
TAP
A Super Joey only works with a single
Hopper system.
A Super Joey only works with a
Solo Node, not a Duo Node.
JOEY
To
INTEGRATOR
Input
RG6
DUAL COAX
(rated at 3 GHz) INTEGRATOR
200235
1.46A
JOEY
DC PASS
SATELLITE
EchoStar Technologies L.L.C.
TO CLIENT
SOLO NODE
185834
TO CLIENT
# TVs (Hopper + Super Joey = 5 tuners)
1 - Hopper
2 - Hopper + Super Joey
3 - Hopper + Super Joey + Joey
4 - Hopper + Super Joey + 2 Joeys
5 - Hopper + Super Joey + 3 Joeys
75 ohm
Terminator
When switching back and forth
between the Travler and the portable
dish, the RG6 coax from each Solo Node
and the RG6 coax from each satellite dish
must be connected/disconnected by hand.
SOLO NODE
185834
TO
CLIENT
TO
SERVER
TO SERVER
10.5-28V
EchoStar Technologies L.L.C.
TO LNBFs
MMTTVV-FMYYXXXXX
SOLO NODE
85834
Grounding wire size: Copper wire-8-14 AWG
Copper coated steel wire-17 AWG
Satellite Signal
950 - 2150 MHz
MoCA
650 - 875 MHz
Satellite + MoCA
650 - 3000 MHz
EQUIPMENT IN THE RV
4-WAY
SPLITTER
TO LNBF
EchoStar Technologies L.L.C.
INTEGRATOR
200235
TO ADV. CLIENT
MoCA
OUT
OUT
HFS-4D
1.46A
4-WAY SPLITTER
5-2150 MHz
DIODE STEERED
OUT
IN
OUT
TO HVN
JOEY
1.46A
TAP
190506
MoCA
DC PASS
SOLO NODE
185834
NOTE:
Only the RG6 coax
from the Solo Node
has to be rated at
3 GHz. However,
it’s easier to run
dual 3 GHz cable
instead of two,
separate cables
(one rated at 2 GHz
and the other at
3 GHz).
SATELLITE
DISH 1000, 1000.2, or 1000.4
MMTTVV-FMYYXXXXX
TO NODE
MoCA
EchoStar Technologies L.L.C.
TAP
190506
TO HOST
MoCA
SUPER JOEY
TO CLIENT
BATWING
OVER-THE-AIR
TV ANTENNA
DISH OTA
MODULE-USB
HOPPER
125
LICENSED UNDER U.S.
PATENT NO. 6,233,389
FCC ID: DKNTK421
US: 5G6MM00BID050
USB 2.0 HARD DRIVE
(self powered)
© 2014 Tom Hughes

Download Report