To Download The CompactCNG Brochure (PDF

SPACE CONSCIOUS
A smaller footprint than other standard
sized compressors increases the
possible locations for customers.
LOWER OPERATING COSTS
Long maintenance intervals & equipment
lifetime through IMW’s CleanCNG
technology.
CLEANER FUEL
Non-lubricated compressors produce
cleaner CNG which reduces maintenance, cost of operation and extends
vehicle engine life.
IMW’s CompactCNG includes proven CleanCNG technology in a new compact package, making it
small enough to fit into CNG sites of all sizes. It features the efficient IMW compressor, up to 150hp
(112kW) electric drive motor, on skid diverter panel & a high level of serviceability. This economical
package makes even small installations possible with its low capital & operating costs and is suitable
up to medium size fleets.
Features
-
Small skid footprint
Benefits
-
Fits into a standard 20ft shipping container
-
Suitable for a wide variety of sites
-
Up to 150hp (112kW) electric drive motor
-
Reduces site space requirements
-
Optional vibration isolators which reduce compressor
vibration transmission to the ground
-
Protects nearby sensitive equipment and structures with
optional vibration isolators
-
Optional external skid mounting points
-
Reduces site installation time and cost
-
On-skid diverter panel
-
Minimizes shipping costs
-
Flexible design which can be configured as a traditional
compressor or a daughter station compressor
-
-
Traditional compressor configurations cover a wide
range of suction pressures & flow rates while utilizing a
low HP (kW) motor
Low operating cost with long maintenance intervals
and equipment lifetime through IMW’s CleanCNG
technology
-
Electrical savings throughout the life of the package
through low horsepower motors
-
IMW’s CleanCNG technology which includes a nonlubricated compressor
-
Minimal oil carryover to the discharge gas.
-
Worldwide support through IMW offices and affiliates
6'5" (2m)
7'7" (2.3m)
7'7" (2.3m)
10’6” (3.2m)
CompactCNG Front View
10’6” (3.2m)
CompactCNG Rear View
Technical
STANDARD COMPRESSOR TECHNICAL SPECIFICATIONS - COMPACTCNG
Configuration
Single compressor
Stages of Compression
3-5
Skid Footprint (Contact area between skid & concrete) 10’5”L x 5’6”W (3.2m L x 1.7m W)
Enclosure Dimensions
Top Air Discharge
10’6”L x 6’11”W x 10’H (3.2m L x 2.1m W x 3m H)
Side Air Discharge
10’6”L x 6’5”W x 7’7”H (3.2m L x 2m W x 2.3m H)
Weight
Approximately 13,000lbs-14,500lbs (5900-6580kg)
Noise Level
85dba @ 3m
Gas Line Connections
Inlet
2” NPS & 3” NPS
1/2” & 3/4” tube connections
Discharge
Skid electrical classification
C1D1 & C1D2
MCC Panel Electrical Classification
Non-hazardous
MCC Panel Location
Off-skid
Main Motor Power
50hp (37kW), 100hp (75kW), 150hp (112kW)
High Voltage Electrical Supply
575VAC, 60hz / 480VAC, 60hz / 440VAC, 60hz / 380VAC, 50hz
Priority Panels
Single line diverter panel & 3 line priority panel
Code Compliance
ANSI, ASME, NFPA, UL, CSA, ISO, IEC
DISCHARGE PRESSURE
Standard Flow Rage
310bar (4500psig)
250bar (3626psi)
SCFM
72-427
74-548
DGE/hr
30-178
31-229
Nm³/hr
116-686
119-881
Sm³/hr
122-724
126-929
0.3-10bar (5-150psig)
0.7-18bar (10-261psi)
Inlet Pressure Range
DAUGHTER STATION TECHNICAL SPECIFICATIONS - COMPACTCNG
Configuration
Single Compressor
Stages of Compression
2
Main Motor Power
100hp (75kW)
INLET PRESSURE
Flow Rage
Discharge Pressure Range
20bar (290psig)
200bar (2900psig)
SCFM
72-427
74-548
DGE/hr
30-178
31-229
Nm³/hr
116-686
119-881
Sm³/hr
122-724
126-929
250bar (3626psig)
250bar (3626psig)
The IMW
Difference
IMW non-lubricated compressors set
the global standard for minimum oil
carry-over without the waste, cost and
negative environmental issues of
additional filters, auto oil drain systems
and supplementary oil tanks. Only 5
PPM or less vs. 100 PPM or more.
IMW is the largest and only exclusive
manufacturer of non-lubricated CNG
compressors globally making us a
proven manufacturer with the world
class experience you need supporting
you.
Safety & Environmental
A global leader in manufacturing CNG and LNG fueling systems,
IMW meets all ISO 9001:2008 Quality Management System
Safety and Environmental protocols. Our partners applaud our
dedication to safety.
Safety
-
The compressor enclosure has a Class 1, Div. 2, with gas detection and
ventilation.
-
The exterior MCC area rated as non-hazardous.
-
Enclosure equipped with gas detection and Class 1, Div. 2 lighting.
-
Signal lights to indicate compressor status and alarm state in event of gas
leaks or ESD alarm activation.
-
MCC connections available for site fire detection cameras and
communication hardware.
-
Can be equipped for phone, pager, or email warning, or an alarm will be
sent in the event of an emergency.
-
ESD (emergency shutdown device) at each end of the enclosure, on the
MCC, and one inside the enclosure. This cuts off gas supply, isolates
storage, and drains compressors.
-
Overpressure protection with ASME-certified pressure relief valves.
Environmental
-
Non-lubricated compressors cut out the waste, cost, and negative
environmental issues of additional filters, auto oil drain systems and
supplementary oil tanks. Only 5 parts-per-million or less vs. 100 PPM or more.
-
Our clean technology prevents costly, troublesome oil accumulation in heat
exchangers, storage vessels, and vehicle systems. This ensures lower
operating costs, happier customers, and increased station profitability.
IMW has the best durability and
reliability in the industry.
IMW is the only manufacturer offering
advantages of twin & triple configurations. This allows for variable supply
for higher efficiency at low demand
periods and full redundancy and
enhanced reliability.
IMW is the only manufacturer that
covers the widest spectrum of
compression requirements with a
single block instead of multiple, unique
machines. Less training is required and
there are more common parts.
Reach out to
IMW Industries today
and schedule a project
discovery meeting with
our design team.
web www.imw.ca
toll free +1 877.446.9648
fax +1 604.792.3806
email [email protected]

Download Report