Glovebox gloves

Some examples of the PEDI sales programme
Flanges for fixing
gloves or
waste bags with special
Pedicht-profiles
Glove-Box made of reinforced
PVC-film and alu structure
outside working area
Glovebox gloves
Gloves for use in glove boxes in nuclear engineering installations, as well as in the
medical, pharmaceutical and electronics
industries.
Glovebox gloves provide maximum protection. Fixing
on a glove holder must be exact and absolutely tight.
We stock gloves of suitable materials and sizes for a
wide range of application conditions.
Together with our PEDICHT glove fixing system, the
gloves provide optimum safety in use and simple
change of glove.
Test swabs
(Smears) for
controlling surfaces
Overshoes,
washable with
anti-slip sole
Ask for the relevant brochures !
Subject to modification
112004 - 02.2006
PERSONEN-SCHUTZ-SYSTEME
SYSTÈMES DE PROTECTION DES PERSONNES
SISTEMA DE PROTECCION PERSONAL
SYSTEMS FOR PROTECTION OF PERSONS
PERSONEN-SCHUTZ-SYSTEME
SYSTÈMES DE PROTECTION DES PERSONNES
SISTEMA DE PROTECCION PERSONAL
SYSTEMS FOR PROTECTION OF PERSONS
Pedi AG Postfach 319 CH-5036 Oberentfelden Tel. +41 (0)62 737 72 80 Fax +41 (0)62 737 72 98
Pedi AG Postfach 319 CH-5036 Oberentfelden Tel. +41 (0)62 737 72 80 Fax +41 (0)62 737 72 98
Permeation
[cm ]
[ sec ]
A = area
2
t = time
The following criteria must be observed for the selection in view of the wide range of materials, thicknesses, hand sizes and opening diameters:
P•A•t• p
[ cm3 (NTP) ]
s
∇
The requirements of Glove Boxes and their gloves are continually increasing. This is not
only in the interests of technical progress, but also for protection of the environment. We
provide your boxes with gloves specially adapted to the various problems.
q=
∇
Glovebox gloves
p = pressure difference [mbar]
s = material thickness
P = permeation coefficient according to table
Materials:
A
CR
P
Neoprene ®, (chloropren)
Color: black
IIR
(Bromine) butyl
Color: black
C
CSM
Hypalon ®
(chlorosulphonated polyethylene)
Color: white
PUR
E
F
IIR/CSM
IIR/EPDM
0.10
0
Butyl with EPDM coating
Color: interior black
exterior grey
High impermeability of water vapour, gases
and toxic chemicals. Good electrical insulating properties. Flexible, with good handle
even at low temperatures.
Range of application temperatures:
-40 to +90°C
0.16
Polyurethane
Color: red
Butyl with Hypalon® coating
Color: interior black
exterior white
0.250
0.208
0.20
(Special: with lead intermediate layer)
Butyl (IIR)
0.250
0.052
0.05
P
18
16
14
12
10
8
6
4
2
0
Butyl
Chloropren
H2O
Hypalon
Polyurethan
water/water vapour
Chloroprene/neoprene® (CR)
18.00
12.00
4.00
2.00
Butyl
cm2 (NTP)
1012 • sec • mbar
Basic materials
carbon dioxide
0.25
B
D
CO2
[cm]
Chloropren
Highest permeability of polymers processed
by us. Used when low requirements
made of box.
Range of application temperatures:
-35 to +90°C
Hypalon Polyurethan
Material thicknesses:
0,30 / 0,40 / 0,50 / 0,60 / 0,70 mm
P
Hand shapes:
ambidextrous
fully anatomic
=
=
for wearing on both hands
left and right hand glove
Hand size:
Neoprene
7
8
all other materials
S
M
9
10
0.010
0.009
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0
N2 nitrogen
0.010
Hypalon ® (CSM)
0.010
0.005
0.003
Butyl
Chloropren
Hypalon
Good ageing and ozone resistance, resistant
to oxidizing chemicals, low air permeability.
Range of application temperatures:
-20 to +120°C
Polyurethan
L
P
Opening diameter:
Neoprene
mm
150 180
200 230
all other materials
mm
150 160
180 190
other diameters, e.g. 250 mm are available in limited
handshapes and sizes - please ask for more details
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
O2 oxygen
Polyurethane (PUR)
0.040
0.028
0.030
0.013
Butyl
Chloropren
Hypalon
Polyurethan
High tearing, abrasive and notch strength,
good handle, resistant to oil and gasoline.
Good resistance to ozone and chemicals.
Range of application temperatures:
-35 to +80°C
Permeation
[cm ]
[ sec ]
A = area
2
t = time
The following criteria must be observed for the selection in view of the wide range of materials, thicknesses, hand sizes and opening diameters:
P•A•t• p
[ cm3 (NTP) ]
s
∇
The requirements of Glove Boxes and their gloves are continually increasing. This is not
only in the interests of technical progress, but also for protection of the environment. We
provide your boxes with gloves specially adapted to the various problems.
q=
∇
Glovebox gloves
p = pressure difference [mbar]
s = material thickness
P = permeation coefficient according to table
Materials:
A
CR
P
Neoprene ®, (chloropren)
Color: black
IIR
(Bromine) butyl
Color: black
C
CSM
Hypalon ®
(chlorosulphonated polyethylene)
Color: white
PUR
E
F
IIR/CSM
IIR/EPDM
0.10
0
Butyl with EPDM coating
Color: interior black
exterior grey
High impermeability of water vapour, gases
and toxic chemicals. Good electrical insulating properties. Flexible, with good handle
even at low temperatures.
Range of application temperatures:
-40 to +90°C
0.16
Polyurethane
Color: red
Butyl with Hypalon® coating
Color: interior black
exterior white
0.250
0.208
0.20
(Special: with lead intermediate layer)
Butyl (IIR)
0.250
0.052
0.05
P
18
16
14
12
10
8
6
4
2
0
Butyl
Chloropren
H2O
Hypalon
Polyurethan
water/water vapour
Chloroprene/neoprene® (CR)
18.00
12.00
4.00
2.00
Butyl
cm2 (NTP)
1012 • sec • mbar
Basic materials
carbon dioxide
0.25
B
D
CO2
[cm]
Chloropren
Highest permeability of polymers processed
by us. Used when low requirements
made of box.
Range of application temperatures:
-35 to +90°C
Hypalon Polyurethan
Material thicknesses:
0,30 / 0,40 / 0,50 / 0,60 / 0,70 mm
P
Hand shapes:
ambidextrous
fully anatomic
=
=
for wearing on both hands
left and right hand glove
Hand size:
Neoprene
7
8
all other materials
S
M
9
10
0.010
0.009
0.008
0.007
0.006
0.005
0.004
0.003
0.002
0.001
0
N2 nitrogen
0.010
Hypalon ® (CSM)
0.010
0.005
0.003
Butyl
Chloropren
Hypalon
Good ageing and ozone resistance, resistant
to oxidizing chemicals, low air permeability.
Range of application temperatures:
-20 to +120°C
Polyurethan
L
P
Opening diameter:
Neoprene
mm
150 180
200 230
all other materials
mm
150 160
180 190
other diameters, e.g. 250 mm are available in limited
handshapes and sizes - please ask for more details
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
O2 oxygen
Polyurethane (PUR)
0.040
0.028
0.030
0.013
Butyl
Chloropren
Hypalon
Polyurethan
High tearing, abrasive and notch strength,
good handle, resistant to oil and gasoline.
Good resistance to ozone and chemicals.
Range of application temperatures:
-35 to +80°C
Some examples of the PEDI sales programme
Flanges for fixing
gloves or
waste bags with special
Pedicht-profiles
Glove-Box made of reinforced
PVC-film and alu structure
outside working area
Glovebox gloves
Gloves for use in glove boxes in nuclear engineering installations, as well as in the
medical, pharmaceutical and electronics
industries.
Glovebox gloves provide maximum protection. Fixing
on a glove holder must be exact and absolutely tight.
We stock gloves of suitable materials and sizes for a
wide range of application conditions.
Together with our PEDICHT glove fixing system, the
gloves provide optimum safety in use and simple
change of glove.
Test swabs
(Smears) for
controlling surfaces
Overshoes,
washable with
anti-slip sole
Ask for the relevant brochures !
Subject to modification
112004 - 02.2006
PERSONEN-SCHUTZ-SYSTEME
SYSTÈMES DE PROTECTION DES PERSONNES
SISTEMA DE PROTECCION PERSONAL
SYSTEMS FOR PROTECTION OF PERSONS
PERSONEN-SCHUTZ-SYSTEME
SYSTÈMES DE PROTECTION DES PERSONNES
SISTEMA DE PROTECCION PERSONAL
SYSTEMS FOR PROTECTION OF PERSONS
Pedi AG Postfach 319 CH-5036 Oberentfelden Tel. +41 (0)62 737 72 80 Fax +41 (0)62 737 72 98
Pedi AG Postfach 319 CH-5036 Oberentfelden Tel. +41 (0)62 737 72 80 Fax +41 (0)62 737 72 98

Download Report