LHX vCELL Fact Sheet - CLARCOR Industrial Air

fact sheet
altair® LHX vCell
High Performance Filtration from the
Gas Turbine Specialists
The CLARCOR Industrial Air filter business offers extremely high levels
of turbine protection in a wide range of environments with its selection of
inlet filters. Our 40 years of expertise in gas turbine intake filter design
has influenced the development of this water-resistant filter specifically
designed for onshore oil and gas applications. Developed to provide
extended availability of key gas turbine assets, its high dust-holding
capacity helps prolong filter life and significantly lowers operating costs.
The filter is designed for low pressure loss to enable increased power
KEY BENEFITS
output and availability. Available in industry-standard size, it is equally
• Best-in-class turbine protection against
product is available in reverse mode configuration.
suitable for both GE- and non-GE-supplied inlet filter systems. This
corrosives
Best-in-Class Protection Against Corrosives
• Predictable and reliable performance
Non-hydrophobic filters, in wet conditions, are subject to filter unloading
significantly reduces compressor contamination
caused by water leaching through and washing filter contaminants
and the need for unplanned maintenance
downstream. The altair LHX vCell provides best-in-class turbine protection
• Low pressure loss helps increase power output
against corrosives and enhanced protection against moisture with its unique
and/or improve fuel efficiency
combination of hydrophobic properties and high efficiency protection.
• High dust-holding capacity helps extend filter life
and reduce costs
• Easily disposable by incineration
• Easy to install and change out to reduce
downtime
Performance Data
ASHRAE 52.2 rating (2500 cfm)
MERV15
EN779 rating (4250 m3/hr)
F9
3
ASHRAE dust-holding capacity (450 Pa) @ 4250 m /hr
635 g/1.4 lb
Clean weight
13.7 kg/30 lb
Operating temperature range
-32ºC to 70ºC
-25ºF to 158ºF
Dimensions
595 mm H x 595 mm W x 435 mm D
23.4” H x 23.4” W x 17.1” D
For more information, contact your altair representative at CLARCOR Industrial Air:
11501 Outlook Street, Suite 100 | Overland Park, KS 66211
T: +1.800.821.2222 | T: +1.816.356.8400 | F: +1.816.353.1873
3 Omega Park | Alton, GU34 2QE | United Kingdom
T: +44 (0) 1420 541188 | F: +44 (0) 1420 541298
Email: [email protected]
©2014 BHA Altair, LLC. All rights reserved. altair is a registered trademark of BHA Altair, LLC.
ALTAIR011 (05/2014)
fact sheet
altair® LHX vCell
Key Features
Continuous gasket
with gasket stop
Best in class
hydrophobic properties
Robust
ABS frame
Protective grids,
ensures wet
burst pressure of
greater than
25” WG
Fully potted and
sealed media packs
Initial Fractional Efficiency
Pressure Drop
Flow Rate (cfm)
160
0
500
1000
1500
2000
2500
0.6
80
70
60
50
40
30
100
0.4
80
0.3
60
0.2
40
20
0.1
20
10
0
0.5
120
Pressure Loss (in w.g.)
140
90
Pressure Loss (Pa)
Initial Discharged Fractional Efficiency (%)
100
0.1
1
10
Particle Size (microns)
For more information, contact your altair representative at CLARCOR Industrial Air:
11501 Outlook Street, Suite 100 | Overland Park, KS 66211
T: +1.800.821.2222 | T: +1.816.356.8400 | F: +1.816.353.1873
3 Omega Park | Alton, GU34 2QE | United Kingdom
T: +44 (0) 1420 541188 | F: +44 (0) 1420 541298
Email: [email protected]
0
0
500
1000
1500
2000
2500
3000
3500
4000
4500
0
5000
3
Flow Rate (m /hr)
©2014 BHA Altair, LLC. All rights reserved. altair is a registered trademark of BHA Altair, LLC.
ALTAIR011 (05/2014)

Download Report