fact sheet altair® LHV vCell High Performance Filtration from the Gas Turbine Specialists The CLARCOR Industrial Air filter business offers extremely high levels of turbine protection in a wide range of environments with its selection of inlet filters. Our 40 years of expertise in gas turbine intake filter design has influenced the development of this water-resistant filter specifically designed for onshore oil and gas applications. Developed to provide extended availability of key gas turbine assets, its high dust-holding capacity helps prolong filter life and significantly lowers operating costs. KEY BENEFITS The filter is designed for low pressure loss to enable enhanced power • Best-in-class turbine protection against suitable for both GE- and non-GE-supplied inlet filter systems. output and availability. Available in industry-standard size, it is equally corrosives Best-in-Class Protection Against Corrosives • Predictable and reliable performance significantly reduces compressor contamination and the need for unplanned maintenance • Low pressure loss helps increase power output and/or improve fuel efficiency Non-hydrophobic filters, in wet conditions, are subject to filter unloading caused by water leaching through and washing filter contaminants downstream. The altair LHV vCell provides best-in-class turbine protection against corrosives and enhanced protection against moisture with its unique combination of hydrophobic properties and high efficiency protection. • High dust-holding capacity helps extend filter life and reduce costs • Easily disposable by incineration • Easy to install and change out to reduce downtime Performance Data ASHRAE 52.2 rating (2500 cfm) MERV16 3 EN1822 rating (4250 m /hr) E10 Rated air flow 4250 m /hr (2500 CFM) 3 3 919 g/2 lb ASHRAE dust-holding capacity (450 Pa) @ 4250 m /hr 3 459 g/1 lb Clean weight 13 kg/29 lb Operating temperature range -32ºC to 70ºC (-25ºF to 158ºF) Dimensions 593 mm H x 593 mm W x 435 mm D ASHRAE dust-holding capacity (450 Pa) @ 3400 m /hr (23.3” H x 23.3” W x 17.1” D) For more information, contact your altair representative at CLARCOR Industrial Air: 11501 Outlook Street, Suite 100 | Overland Park, KS 66211 T: +1.800.821.2222 | T: +1.816.356.8400 | F: +1.816.353.1873 3 Omega Park | Alton, GU34 2QE | United Kingdom T: +44 (0) 1420 541188 | F: +44 (0) 1420 541298 Email: [email protected] ©2014 BHA Altair, LLC. All rights reserved. altair is a registered trademark of BHA Altair, LLC. ALTAIR010 (07/2014) fact sheet altair® LHV vCell Key Features Continuous gasket with gasket stop Best in class hydrophobic properties Robust ABS frame Protective grids, ensures wet burst pressure of greater than 25” WG Fully potted and sealed media packs Initial Fractional Efficiency Pressure Drop Flow Rate (cfm) 180 1000 1500 2000 2500 0.7 80 70 60 50 40 0.5 120 0.4 100 30 80 0.3 60 0.2 Pressure Loss (in w.g.) 0.6 140 90 Pressure Loss (Pa) Initial Discharged Fractional Efficiency (%) 500 160 100 40 20 0.1 20 10 0 0 0 0.1 1 10 Particle Size (microns) For more information, contact your altair representative at CLARCOR Industrial Air: 11501 Outlook Street, Suite 100 | Overland Park, KS 66211 T: +1.800.821.2222 | T: +1.816.356.8400 | F: +1.816.353.1873 3 Omega Park | Alton, GU34 2QE | United Kingdom T: +44 (0) 1420 541188 | F: +44 (0) 1420 541298 Email: [email protected] 0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 5000 Flow Rate (m3 /hr) ©2014 BHA Altair, LLC. All rights reserved. altair is a registered trademark of BHA Altair, LLC. ALTAIR010 (07/2014)
© Copyright 2024 ExpyDoc
