RET-3800-6-LMH - Retro Systems

RET-3800-6-LMH dust collector
MH
Made in USA
Why Plaser
D
•
1.
fe
Best Filter Cleaning Technology — Dynamic Pulse allows for Filter Life
Warranty
2. Clean Air Monitor — Always exhausts Clean Air
3. Complete Package “Factory Assembled Components” — Easy installation,
you just provide power and compressed air
Warranty
4. Fully welded single unit — Leak Free performance
I
A Inlet Area
B
F A
G
B Clean Air Exhaust
C Filter Access Door
E
J
D Motor
E Electrical Enclosure
General Information
F Compressed Air
C
& Solenoid Access
Motor: 7.5 HP, 3600—
RPM, 11.0 FLA@480V
bled Components”
Blower: Backward Inclined Airfoil
G Compressed Air
Connection 1” NPT
power
and
Airflow:
3800 CFM @ 10” W.G.
Filter Cartridges: RMO Technology - Vertical Design: Endurex B16 – MERV16
H Hopper & Drum
Filter Quantity: (6) I Blower Access
Filter Size: 14” Diameter x 52” Long
J Spark Arrestor
Media Area: Comparable to 3,072 ft2 Access
Air to Cloth: 1.24:1
H
Construction: 3/16” to 11 ga. Steel, fully welded Nema 4X - Filter Door & Control
Panel Enclosure construction
Warranty: 15 year on cabinet, 5 years on components (see Warranty Document
for details)
Voltage: 480/3/60 Standard; 208/230/575/3/60 Optional
Convenience Options:
Pulse Valves: (6) 1/2” Electronically Actuated Solenoid
Compressed Air Requirements: 1” NPT Supply 2.6 SCFM On-Line Pulse; 15.6
SuperSeal Hopper Gate: Empty drum while collector is running
SCFM Off-Line Pulse @ 80 PSI
Barrel Sensor: Warns when the dust level is nearly full
Filter/Regulator:
Included
80V
Warranty: 15 year on cabinet,
5 years on components
Platform & Ladder
Motor Starter/Disconnect: Included
(see
Warranty
Document
for
details)
Installation Hardware: Included (Concrete anchors, duct sealant & various
hardware)
Voltage: 480/3/60 Standard;
208/230/575/3/60
Optional
Electric
/ Controls:
Dust Containment Options:
tical Design:
Voltage: 480/3/60
Standard
Pulse Valves: (6) 1” Electronically
Actuated
Solenoid
208/230/575/3/60 Optional
ePad: PLC with (3.5”) HMI Screen
Air Requirements:
1” NPT Supply
2.6 SCFM On-Line Pulse; 15.6 SCFM Off-Line Pulse @ 80 PSI
20 Gallon Drum: (2), legs, hopper and drum lid – Standard
Compressed
55 Gallon Drum: (2), legs, hopper and drum lid – Optional
iameter x 52” Long
Outdoor Installation:
Inlet Transition:
Filter/Regulator: Included
Duct Intake: Effective transition for round duct
Motor Starter/Disconnect: Included
Air to Cloth: 1.24:1
y welded
nel Enclosure construction
Outdoor Full Cover – Optional
Regulatory:
Installation Hardware: Included
UL Listed
Controls
– Standard
(Concrete anchors, duct
sealant
& various
hardware)
CSA Certification: Optional, meets Canadian regulations
Energy Savings:
Auto Start - Standard
eDrive - Option: Automatically adjusts the airflow via a flow monitor and VFD to extend filter life and reduce energy consumption by up to 30%. Maintains consistent
airflow throughout the life of the filters.
Safety:
Noise Attenuation:
– Advanced Acoustical Silencing in Blower Plenum – Standard
– Full Acoustical Silencer Plenum (covers top of collector) – Optional
SafeSensor: Clean Air Monitor
Spark Arrestance Plenum: Plasma & Laser cutting applications
Fire Suppression Options:
FM200 - Supprex 200 Premium Fire Suppression System w/Damper Sprinkler Head in Filter Cabinet
Novak Fire Suppression System w/Damper
Explosion Vents: Required when cutting aluminum and other explosive materials. Contact Factory for more details.
HEPA After Filter Plenums
Configurations:
Overall Weight (Lbs): 2,800 - 3,400 (depending on options)
Door Clearance: 47” Minimum
Note: Overall height includes 25 HP motor.
• All specifications are subject to change without notice
• All CFM ratings are based upon manufacturers published performance curves at specific Inches of Water Gauge (WG) unless otherwise specified.
• RoboVent Product Group DOES NOT recommend using Dust Tray containment on High Air-to-Cloth applications.
• For heavy loading applications it is strongly recommended to use the 55 gallon drum containment option
430 W Clay
PO Box 500
Valley Center, KS 67147
p +1 316.755.3683
f +1 316.755.1675
[email protected]
www.retrosystems.com
37900 Mound Road
Sterling Heights, MI 48310
t +1 855.558.VENT
p +1 586.698.1800
f +1 586.698.1801
www.plaservent.com
© 2014 RoboVent Product Group, Inc.