Spec Sheet - Crane Plumbing

ECO PLACIDUS ELONGATED
FLUSHOMETER 4.8L TOILET
VITREOUS CHINA
ECO PLACIDUS ELONGATED
FLUSHOMETER 4.8L TOILET
• Wall-mounted flushometer valve toilet
• Vitreous china
• Meets definition for HET (High Efficiency Toilet)
• High Efficiency (4.8 Lpf/1.07 gpf)
• Will also function at 4.2 Lpf/0.9 gpf and
6 Lpf/1.3 gpf with a properly set dual flush valve
• Condensation channel
• Elongated bowl
• Powerful direct-fed siphon jet action
• 38mm (1-1/2") inlet spud
• Fully glazed 54mm (2-1/8") trapway
• 254 x 305mm (10" x 12") water surface area
• 100% factory flush tested
(Flushometer valve & seat shown not included)
❏
❏
❏
3446NS
Elongated bowl only, top spud
3H722NS Elongated bowl only, top spud
with slotted rim for bedpan
holding
3449NS
Elongated bowl only, back spud
Component Parts:
❏
047007-0070A
Inlet spud (furnished with bowl)
Nominal Dimensions:
660 x 356 x 381mm
(26" x 14" x 15")
Fixture only, less seat, bolt caps and
flushometer valve
Recommended working pressurebetween 25 psi at valve when flushing and
80 psi static.
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2-2008 / CSA B45.1-08
for Vitreous China Fixtures
NOTE: Roughing-in information shown on reverse
side of page
To Be Specified:
❏ Colour: ❏ White
❏ Seat:
❏ American Standard #5901 100 Heavy duty open
front less cover
❏ American Standard #5905 100 Extra heavy duty
open front less cover
❏ Alternative Seat:
❏ Flushometer Valve:
❏ American Standard Selectronic™ #6065 121.002
DC Power (Top Spud)
❏ American Standard Selectronic™ #6065 222.007
DC Power (Concealed Back Spud)
❏ American Standard Selectronic™ #6067 222.007
AC Power (Concealed Back Spud)
❏ American Standard Selectronic™ #6068 222.007
Multi AC Power (Concealed Back Spud)
❏ Alternative Flushometer Valve:
MEETS THE AMERICAN DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE
BUILDING FACILITIES-CHECK LOCAL CODES
● When installed so top of seat is 432 to 483mm (17" to 19")
from the finished floor.
Certiﬁed by
IAPMO R&T
07/11
© 2011 AS Canada ULC
ECO PLACIDUS ELONGATED
FLUSHOMETER 4.8L TOILET
VITREOUS CHINA
3446NS
3H722NS
1" N.P.T. OR C.W.T. SUPPLY
AS REQUIRED TO FLUSH VALVE
FINISHED WALL
660mm
(26)
121mm
(4-3/4)
73mm
(2-7/8)
470mm
(18-1/2)
C/L OF SEAT POST
HOLES 140 mm
(5-1/2) CENTRE
19mm
(3/4)
95mm
(3-3/4)
342mm
(13-1/2)
133mm
(5-1/4)
356mm
(14)
(4) 22mm
(7/8)
HOLES
229mm
(9)
381mm
(15)
FINISHED
FLOOR
70mm
(2-3/4)
3449NS
1-1/2 SPUD
C/L
C/L OF
OUTLET
292mm
(11-1/2)
191mm
(7-1/2)
133mm
(5-1/4)
32mm
(1-1/4)
FINISHED WALL
660mm
(26)
76mm(3) DIA. HOLE IN WALL
FOR 1-1/2 SPUD
C/L
470mm
(18-1/2)
356mm
(14)
C/L OF SEAT POST HOLES
140mm(5-1/2) CENTRES
70mm
(2-3/4)
133mm
(5-1/4)
(3/4)
19mm
95mm
(3-3/4)
330mm
(13)
FINISHED
FLOOR
89mm
(3-1/2)
(4) 22mm (7/8)
DIA. HOLES
229mm
(9)
381mm
(15)
C/L OF
OUTLET
191mm
(7-1/2)
283mm
(11-1/8)
330mm
(13)
133mm
(5-1/4)
32mm
(1-1/4)
NOTES:
● Toilet designed to meet ADA accessibility standards with seat\ height set at 432 to 483mm (17" to 19")
from finished floor.
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).
SUGGESTED 2mm (1/16) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER
VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
CARRIER FAUCET AS REQUIRED TO BE FURNISHED BY OTHERS.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI
Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or
voided pages.
© 2011 American Standard
07/11

Download Report