Distributed by: Global leader in water saving technology Lic. WMKA20079-80 Quality Replacement Valves S S Reliable function Quiet operation INLET VALVE (BOTTOM ENTRY) S S Flexible adjustment Easy installation INLET VALVE (REAR ENTRY) S S Stable flush volume Integrated filter OUTLET V VAL VALVE ALVE ALVE Comes standard with 40mm button Full flush adjustment Minor water level adjustment water level adjustment Major water level adjustment C Suitable for replacement in all bottom inlet toilet cisterns C Suites high and low water pressure 20-800 kpa (Can be used in tanks & gravity systems) C ½" inlet diameter C Removable SS line filter (prevents clogging) CODE: XI210 RRP: $17.60 inc GST 3 years replacement warranty For full warranty details refer to Gemini website at: www.gemini-industries.net C Suitable for flush to wall toilet suites with back inlet C PVC coated SS braided hose for immersed applications (Reduces corrosion inside the cisterns) Half flush adjustment up decrease down increase Adjustable overflow C Full flush adjustable to 4.5-9L* C Half flush adjustable to 3-5L* C Suites high and low water C Adjustable over flow height C Removable SS line filter C Pure silicone outlet washer (lasts pressure 20-800 kpa(Can be used in tanks & gravity systems) (prevents clogging) (maintains air gap in most cistern height) much longer than rubber) * [Depends on the size of the tank] CODE: XI230 RRP: $30.80 inc GST Gemini Industries Pty Ltd. T: 1300 717 717 F: 1300 746 480 CODE: XI200 RRP: $28.60 inc GST email: [email protected] warranty: [email protected] Distributed by: Global leader in water saving technology Lic. WMKA20079-80 Specifications & Installation « « Easy installation « Water saving Attractive Retail packaging « stocked by quality plumbing and hardware stores • Turn off water supply • Disconnect water supply hose/pipe from • Remove cistern lid 132-292 mm 243-338 mm existing valve • Flush toilet to remove water from tank • Measure height of the water level in the tank • Unscrew external back-nut from old valve and remove (note that there may be water remaining in the cistern) • Remove R&T valve from packaging - adjust Fit valve and tighten back-nut 87 mm Screw adjuster Bolt 290 mm Water supply pipe 244 210 mm height - follow instructions for water level adjustment Flat washer Plastic washer Nut 8mm black washer Fit valve body Fit valve base For the cisterns without a 40mm hole the following buttons can be ordered separately Code: XJ144 Code: XJ145 Code: XJ148 50mm Button Rectangle 64x35mm 60mm Button when replacing in close coupled cisterns you may need to replace the rubber washer as well Part code: X007A Replacement washer kit for inlet & outlet valves Code: XI200 Contains replacement washers for R&T inlet and outlet valves. For fitting assistance call Gemini industries on 1300 717 717 Monday to Friday during business hours