Tooling Specification - Utility ROV Services

Tooling
No. 9 Woodgate Way North
Eastfield Road Industrial Estate
Glenrothes
Fife
KY7 4PE
+44 (0) 1592 77 33 44
www.UTROV.com
We modified the 3 grabs from land based excavator systems, which gives us the knowledge that
they have been extensively tried and tested ensuring that they can operate in the most extreme
and harshest of working environments.
The MFE has also been well proven in offshore operations. A non-contact dredger that is
proficient at clearing sediment without causing damage to subsea structures.
Heavy duty lighting and camera mountings are fitted onto each of the tools as well as the UT
ROV giving the operator specific and general views to carry out his work safely and effectively.
Printed by West Port Print & Design Ltd, St Andrews 01334 477135
This document contains proprietary information and must not be copied or otherwise used without the written permission of Utility ROV Services Ltd.
No. 9 Woodgate Way North
Eastfield Road Industrial Estate
Glenrothes, Fife, KY7 4PE
+44 (0) 1592 77 33 44
www.UTROV.com
Innovate.Mobilise.Deliver.
Tine Grab
Shear Grab
The Tine Grab is a general-purpose grab
that can be used for any material handling
operation. We have 2 sets of legs one with
orange peel and one without, these can
be changed according to the task at hand.
The tine grab has been used for wreck
demolition, boulder clearance and cargo
recovery operations.
Specification
Model No.
Use
Dimensions
Weight
Volume Closed
Volume Open
HYD Displacement Specification
UT ROV TG 01
General Purpose
2.5m Ø x 1.5mH
1650 kg
1.5 m3
3.8 m3
10 l
Model No.
Use
Dimensions
Weight
Jaw Depth
Closing Force
HYD Displacement Operating Angle
Clamshell Grab
Specification
Model No.
Use
Dimensions
Weight
Volume Closed
Foot Print Open
The Shear Grab is specifically used for
subsea demolition. 2 interchangeable
frames have been designed. Frame 1 to
allow the operating angle of the grab to be
remotely changed between horizontal and
vertical. Frame 2 to mount the grab on its
side enabling it to cut vertical stations.
UT ROV SG 01
Structure Cutting & Removal
2.46m 2.03m x 0.97m
2250 kg
600mm
300 t
20 l
90o- 180o
MFE
The Clam Shell Grab is used for bulk
material handling operations. Teeth can
be fitted to the grab to give it extra
penetration into dense material.
The MFE was developed for non-contact dredging
operations, providing an efficient method of
clearing sediment from subsea structures without
damaging the structures themselves.
The clamshell grab has been used for
cargo removal, specifically bulk loose
material such as grain & flour.
Due to the large hydraulic flow requirement MFE’s
are generally powered directly from the surface,
the loss of hydraulic power in the hoses makes this
very inefficient and not suitable for deeper water
operations. The UT ROV eliminates this problem.
Specification
UT ROV CSG 01
Bulk Material Removal
2.5m x 1.7m x 1.25m
2800kg
2.5 m3
4.25 m3
Model No.
Use
Dimensions
Weight
RPM
Prop Ø
HYD Flow
Power
Monitoring
UT ROV MFE 01
Non-contact Dredging
1573 Ø x 1856m
2800 kg
250 (max)
1200 mm
20 l
110 kW
Acoustic camera & RPM
sensor

Download Report