School of Mechanical Engineering Pusat Pengajian Kejuruteraan Mekanikal WHO SHOULD ATTEND? Researchers, Engineers, Lecturers, Biomedical Device Researchers, Product Designers, Medical Practitioners and other related field. DATE : 3 & 4 September 2014 (Wednesday & Thursday). TIME : 9:00 a.m. – 6:00 p.m. VENUE : School of Mechanical Engineering, USM Engineering Campus, Nibong Tebal, Penang. in collaboration with : Organized by: Nanofabrication and Functional Materials (NFM) Research Group School of Mechanical Engineering (wholly-owned by Universiti Sains Malaysia) (Co. No.: 473883-H) and HRDF : 0159 Collaborative Microelectronic Design Excellence Centre (CEDEC) School of Electrical and Electronics Engineering HRDF CLAIMABLE* *Subject to HRDF Approval INTRODUCTION ENQUIRIES This 2-day course is an introduction to microfluidic sensors, fabrication techniques and the application of this technology in today’s life such as lab-on-chip, micro robotic and sensing instrumentation. It is intended for those who are interested in becoming involved in the microfluidics field and micro three-dimensional (3D) fabrication technology. This course will provide the fundamental outlines on what possible and the methods on how the devices are designed and fabricated. The main objective of this course is to assist the attendees with comprehensive understanding on identifying the suitable material and fabrication technique for a given microfluidic application, to understand modern trends and development in the field of micro 3D fabrication technique and to learn the application examples of microfluidic components in bio medical devices. Technical: LEARNING OUTCOMES i. Able to understand on the implementation of fluid behaviour as sensing element in MEMS sensor ii. Able to understand the current technology of micro 3D fabrication technique iii. Able to generate ideas on fabricating micro fluidic channel as well as understanding the integration of the sensor and its readout circuitry. METHODOLOGY This course will be divided into lectures and hands on sessions. The theoretical of fluidic behaviour and the fabrication techniques will be elaborated to the participant through lectures. Then, the participants will be split into a few groups to hands on sessions for handling the design and fabrication of microfluidic channels. The participants will experience hands on in lithography technique and microfluidic channels fabrication. The hands on sessions will be conducted in the Nanofabrication and Functional Materials (NFM) laboratory. Dr. Khairudin Mohamed School of Mechanical Engineering (T) +604 – 599 5860 (E) [email protected] Dr. Asrulnizam Abd. Manaf School of Electrical & Electronics Engineering (T) +604 – 599 6013 / 5097 (E) [email protected] Registration & other enquiries: Business Unit, School of Mechanical Engineering Ms. Hasnah Hassan : +604 – 599 6309 Ms. Sharmila Azlin Ramly : +604 – 599 5981 (F) : +604 – 594 1026 (E) : [email protected] RECOMMENDED ACCOMMODATION RITZ KAPITOL HOTEL No 1, Lorong Ria, 34200 Parit Buntar, Perak. (T) +605 – 717 0666 (FB) https://www.facebook.com/pages/Ritz-KapitolHotel/501829156548019 GOLDEN ACE HOTEL 11A, Jalan Pekaka 2, Taman Pekaka, Nibong Tebal, Pulau Pinang. (T) +605 – 716 9973 (M) +6012 – 5582229 DAMAI HOTEL Lot 6298, Jalan Taiping, 34200 Parit Buntar, Perak. (T) +605 – 716 8222 (F) +605 – 716 3222 (W) http://hoteldamai.com/index.php?page=a1 WORKSHOP FEE Fee includes tea breaks and lunches, workshop materials, floor assignments and evaluation and Certificate of Attendance. MYR 1,300.00 per participant* GROUP : MYR 1,200.00 per participant* (Minimum of two (3) participants in a group) * Fee does not include accommodation and travelling expenses. D’JAWI BELLA HOTEL Jalan Besar, Seberang Perai Selatan, 14200 Pulau Pinang. (T) +604 – 583 2000 (M) +6017 – 244 2463 (E) [email protected] (FB) https://www.facebook.com/pages/D-Jawi-BellaHotel/146629495441419 DESASISWA UTAMA (GUEST HOUSE) USM Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang. (T) +604 – 599 1063 / +604 – 594 9235 3D Fabrication of Micro-fluidic for Biomedical & Bio-sensing Application Workshop Schedule and Contents Day 1 8.30 – 9.00 a.m. Registration 9.00 – 10.30 a.m. 10.30 – 11.00 a.m. Session 1 – Introduction to Fundamental of Fluid behaviour in Micro and Nano Sciences Tea Break 11.00 a.m. – 12.30 p.m. Session 2 – Micro and nanofabrication technique 12.30 – 2.00 p.m. Lunch 2.00 – 3.00 p.m. Session 3 – Pattern Generation Using Adobe Illustrator and CAD 3.00 – 3.15 p.m. Tea Break 3.15 – 6.00 p.m. Session 4 – Mask Making Day 2 9.00 – 10.30 a.m. Session 5 – Lithography 10.30 – 11.00 a.m. Tea Break 11.00 a.m. – 12.30 p.m. Session 6 – Micro channel fabrication 12.30 – 2.00 p.m. Lunch 2.00 – 4.30 p.m. Session 7 – Advancement of Microfluidic sensor and modelling in health application 4.30 p.m. Tea break and Closing Ceremony Disclaimer The Organizer reserves the right to reschedule or cancel any part of its published programme or venue due to unforeseen circumstances and will not accept liability for costs incurred by participants or their organizations for the cancellation of travel arrangements and/or accommodation reservations as a result of the course being cancelled or postponed. Advance notice will be given if there are such changes or cancellation. WORKSHOP FACILITATORS KHAIRUDIN MOHAMED graduated his ME from University of Canterbury, Christchurch, New Zealand in 2005 and received his PhD from same university in 2009. Prior to this, he was working at Intel Technology Sdn Bhd Penang from 1995 to 1998 as development engineer. He was then joined ST Microelectronics Sdn. Bhd Muar, Johor; from 1998 to 2002 as engineering specialist. Currently he is a Senior Lecturer of the School of Mechanical Engineering at Engineering Campus, Universiti Sains Malaysia (USM), Penang. His research interests are focused on the nanofabrication of ‘top down’ and ‘bottom up’ techniques. He has authored and co-authored more than 40 international technical journals or conference papers. His recent works include the fabrication of three dimensional nanostructures, high aspect-ratio nanostructures, roll-to-roll nanoimprint lithography molecular dynamics simulation, surface acoustic wave (SAW) device and growing metal oxides nanowires for future applications. At USM, he leads the Nanofabrication and Functional Materials (NFM) research group which focused on the fabrication of micro and nano devices, and functional materials such as metal oxide nanowires and smart memory alloy. He is currently supervising 5 PhD and 4 MSc students. ASRULNIZAM BIN ABD MANAF received the B.Eng in Electrical and Electronic Engineering from Toyohashi University of Technology, Japan in 2001. Then, he worked as electrical engineer at Toyo-Memory Technology Sdn. Bhd at Kulim High Tech Park before he further his master degree at Toyohashi University of Technology, Japan. He received M.Eng in Electrical and Electronic Engineering in 2005. He pursued his Ph.D in Keio University, Japan. He received Ph.D in engineering from department of Applied Physic and Physico Informatics, School of Fundamental Science and Technology, Keio University Japan in 2009. Since 2009, he joined the school of Electrical and Electronic Engineering, Universiti Sains Malaysia as a senior lecturer. He has authored and co-authored 80 international technical journal or conference papers. His current research interest includes development of microfluidic-based DNA sensor integrated with CMOS circuitry, miniaturized of fluidic-based inclination sensor, fluidic-based MEMS acoustic and flow sensor for underwater application, fluidic-based flexible micro Thermoelectric Generator (mTEG)-based energy harvesting, micro fluidic-based memristor, micro fluidic-based inductor, Graphene-based transistor and micro 3-dimension fabrication technique by using grayscale technology. REGISTRATION FORM 3D FABRICATION OF MICRO-FLUIDIC FOR BIOMEDICAL & BIO-SENSING APPLICATION Send registration form to : Business Unit, School of Mechanical Engineering, USM Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang. Fax: +604 – 594 1026 Email: [email protected] NO. PARTICIPANT NAME POSITION & EMAIL 1. 2. 3. 4. 5. Organisation Address: Postcode: Contact Person: Tel: E-mail: Mobile: MODE OF PAYMENT I enclosed Fax: Cheque Number Bank No. of Participants MYR Normal Bank Draft Money Order Group PO / LO TOTAL Cheque / Bank Draft / Money Order / LO / PO must be made payable to ‘USAINS HOLDING SDN. BHD.’. 1. Bank Transfer (Please fax/email your Bank-in Slip (Print your name & details on the slip) ) Payee Name : USAINS Holding Sdn. Bhd. Details : 3D FABRICATION OF MICRO-FLUIDIC FOR BIOMEDICAL & BIO-SENSING APPLICATION Name of Bank : CIMB Bank Berhad (USM Branch), Universiti Sains Malaysia, 11800 USM Penang. Account Number : 800 – 381 – 7364 2. Local Order (LO) or Purchase Order (PO) must be presented before the event. The Organizer reserves the right to refrain a registered participant from taking part in the event if no proof of payment can be presented. This only applies to registered participants who have NOT paid the registration fee PRIOR to the event date. Confirmation of participation can only be made by payment or LO / PO receives by the organiser. 3. Cancellation / Substitution A full refund less administration fee of MYR300.00 will be given for cancellation received not later than 10 working days before the workshop. No refund will be made after this period. However, substitute participants are welcomed at no extra charge provided written notice of at least 5 working days before the event is given to the Organizer.