Helping Kids Get To School Since 1987

RTC QUICK-REPLACEMENT PANEL
For Spot Devices Installations
The RTC Quick-Replacement Panel for Spot Devices
Installations is an efficient and economical solution to those
who have lost the ability to operate their school flashers. The
Quick-Replacement Panel features the same hole pattern as
the Spot Devices panel for easy,
on-site installation. Combine the
replacement panel unit, RTC’s
legendary AP22 time switch,
RTC Connect™ Software, and
your choice of communication
options for an economical and
permanent solution to help get
your community’s children to
Quick-Replacement Panels are available
school
safely.
for both an AC or DC installation.
Helping Kids Get To School Since 1987
RTC-Traffic.com | contact our team at [email protected] for more information | toll-free 800.782.8721
RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas 76001 | ©2014 RTC Manufacturing, Inc. All Rights Reserved.
fax
817.274.3610
RTC QUICK-REPLACEMENT PANEL
For Spot Devices Installations
DC Features and Specifications
— Plug and play time switch and communication options
(900MHz radio and M2M cell modem)
—Use existing battery or replace with efficient
33AH SLA battery
— .125" 5052 aluminum panel, 18.0625"H x 9"W
—4"H x 4.5"W DC interface circuit board with built-in flasher
for time switch, solar, battery, and load connections
— Circuit Board: 502598FCB NEMA Certified
— Sunsaver 10L Solar Regulator: for use in CII, Div. 2,
Gp ABCD hazardous locations, operating temperature
-40 to + 85°C
AC Features and Specifications
— AC service in with DC flash out for field LEDs
— Plug and Play Time Switch and Communication options
(900MHz radio and M2M cell modem)
— .125" 5052 aluminum panel, 18.0625" T x 9" W
—4"H x 4.5"W DC interface circuit board with built-in flasher
for time switch, solar, battery, and load connections
— 15-amp square D QOU circuit breaker
— Rated current: 10 A
— Pole description: 1P
— Short-circuit: 10kA
— Electrical connection: HACR rated
— Hesco AC line suppressor
— Peak surge current, 8x20µs: 20KA
— Repetitive peak surge current, 8X10µs: 20KA
— Peak surge voltage @ 10KA, 8x20µs: 650 Volts
— Energy: 270 Joules
— Power dissipation: 1.5 Watts (max.)
— Continuous AC voltage: 130VAC
— Peak voltage @ 1ma: 212 volts
— Typical capacitance: 400pF
— Connections: stud #10-32
— Operating temperature: -40°C to +85°C
— Follow current: none
— Circuit board: 502598FCB NEMA certified
— Circuit breaker: CSA, IEC, UL listed, RoHS 3Q2014
RTC-Traffic.com | contact our team at [email protected] for more information | toll-free 800.782.8721
RTC Manufacturing, Inc., 1016 Enterprise Place, Arlington, Texas 76001 | ©2014 RTC Manufacturing, Inc. All Rights Reserved.
fax
817.274.3610
072214

Download Report