Download TDS

TEGOLON® ECO 1010-10
Fully vegetable based polyamide particles
• Nylon-10/10 powder from 100% renewable sources
• High oil absorption
• Mattifying properties
• Less tackiness results in a pleasant skin feel
• Especially suitable for color cosmetics
Personal Care
INCI name
Nylon-10/10
The particle size of TEGOLON® ECO 10-10 is
precisely adjusted in order to impart a pleasant skin
feel in cosmetic formulations. The summarized
particle size distribution is shown in Figure 1.
Chemical and physical properties
properties
(not part of specifications)
Powder
100
Further product information
(not part of specifications)
Source
100% bio-sourced material,
castor-oil derived
Summarized distribution (%)
Form
80
60
40
20
0
0
Bulk density (g/L)
≥200
Average particle size
(m)
8-12
Specific Surface Area
(m2/g)
BET≤6
pH value (dispersed
in water)
5.0-7.0
15
20
25
30
Fig. 1: Particle size distribution of TEGOLON® ECO 10-10.
TEGOLON® ECO 10-10 is able to mattify the
appearance of the skin. This benefit can be proved
by measuring the reduced gloss of the skin after
treatment with TEGOLON® ECO 10-10 containing
formulations, as shown in Figure 2. As a
consequence, TEGOLON® ECO 10-10 provides
excellent covering power in make-up formulations.
delta gloss after 1 min
Due to a special precipitation process,
TEGOLON® ECO 10-10 has a microporous structure
that can be precisely adjusted. The high specific
surface area of the powder leads to high oil
absorption for various types of oils:
Caprylic/Capric
Triglyceride
Isopropyl
Myristate
Mineral oil
CyclopentaCyclopentasiloxane
0.84
0.75
0.79
0.92
Table 1: Oil absorption of TEGOLON® ECO 10-10 (g (oil)/g (particle)).
delta gloss after 5 min
0
delta gloss
TEGOLON® ECO 10-10 originates from 100%
renewable sources. It is a polyamide from castor oil
derived sebacic acid and 1,10-decanediamine. The
product is specifically developed for cosmetics.
TEGOLON®
ECO 1010-10
10
Particle size (m)
1. Properties
jhgj
5
-1
-2
-3
No Nylon particles
3% TEGOLON® ECO 10-10
Fig. 2: Mattifying effect of TEGOLON® ECO 10-10 in W/O make-up
foundation (CSS 5/11-5). (Measurements have been conducted with
a Konica-Minolta CM-700d spectrophotometer. The delta gloss
value is calculated by gloss value treated skin minus gloss value
untreated skin after 1 and 5 minutes.)
TEGOLON® ECO 10-10 also provides a soft focus
effect, leaving the skin looking more even.
Sensory evaluations showed a reduction in oiliness
and tackiness and therefore an overall pleasant after
feel when TEGOLON® ECO 10-10 is used in cosmetic
formulations.
2. Processing
TEGOLON® ECO 10-10 can be combined with other
powders and pigments
In powder-based foundations or color cosmetics
TEGOLON® ECO 10-10 can be incorporated around
80 °C if the formulation only contains an oil phase.
Especially when preparing O/W emulsions, it is
recommended to add TEGOLON® ECO 10-10 below
40 °C to the combined phases and homogenize for a
short time.
3. Applications
•
•
•
•
•
•
•
•
•
Make-up foundation
Loose or pressed cosmetic powder
Compact foundation
Eye shadow
Eye cream
Serums
Men´s Care
Facial Care
Sun Care
4. Suggested usage concentration
1 - 20% TEGOLON® ECO 10-10
5. Packaging
375 kg pallet (25 x 15 kg carton)
6. Storage
Store at room temperature. Protect from moisture,
heat and cold.
Shelf life: Two years after production, given that the
packaging is not damaged or opened.
7. Hazardous goods classification
Information concerning
•
•
•
•
classification and labeling according to
regulations for transport and for dangerous
substances
protective measures for storage and handling
measures in accidents and fires
toxicity and ecological effects
is given in our material safety data sheet.
Guideline
Guideline Formulations
Natural Smooth O/W Cream
(FU 10/1110/11-8)
Phase A
TEGO® Care PSC 3
(Polyglyceryl-3 Dicitrate/Stearate)
TEGIN® M Pellets (Glyceryl Stearate)
TEGO® Alkanol 18 (Stearyl Alcohol)
TEGOSOFT® OER (Oleyl Erucate)
TEGOSOFT® CT
(Caprylic/Capric Triglyceride)
Persea Gratissima (Avocado Oil)
Phase B
Water
Glycerin
Phase C
TEGOLON® ECO 10-10
Phase D
Xanthan Gum
Phase E
Sodium Hydroxide (10% in water)
Phase F
Benzyl Alcohol; Glycerin; Benzoic Acid;
Sorbic Acid
(Rokonsal BSB-N, ISP)
Phase Z
Perfume
Mattifying Compact Cream MakeMake-up
(CSS 6/116/11-6)
Phase A
3.00 %
TEGOSOFT® AC (Isoamyl Cocoate)
1.20
1.30
5.00
8.50
Passiflora Edulis Seed Oil (Passion Fruit)
3.00 %
Squalane (vegetable based)
4.00 %
%
%
%
%
6.00 %
64.80 %
3.00 %
6.00 %
0.20 %
0.20 %
0.80 %
q.s.
Processing:
1. Heat phase A and B separately to
approx. 70 – 75 °C.
2. Add phase A to phase B with stirring1).
3. Homogenize.
4. Cool with gentle stirring.
5. Add phases C and D below 40 °C.
6. Homogenize for a short time.
7. Add phases E, F and Z below 30 °C and adjust
the pH to 5.0-5.5.
1)Important:
If phase A has to be charged into the vessel first,
phase B must be added without stirring.
stirring.
TEGOSOFT®
OP (Ethylhexyl Palmitate)
31.90 %
10.00 %
Ozokerite
2.00 %
Helianthus Annuus (Sunflower Seed) Wax
(Kahlwax 6607, Kahlwax)
4.00 %
Phase B
Titanium Dioxide (Kronos 1171, Kronos)
12.00 %
Yellow Iron Oxide
(Sicovit Gelb 10 E, Rockwood)
1.00 %
Red Iron Oxide
(Sicovit Rot 30 E, Rockwood)
0.30 %
Brown Iron Oxide
(Sicovit Braun 70 E, Rockwood)
0.60 %
Black Iron Oxide
(Sicovit Schwarz 80 E, Rockwood)
0.20 %
TEGOLON® ECO 10-10
20.00 %
Phase C
Dimethicone, Trisiloxane
(Xiameter PMX 1184, Dow Corning)
10.00 %
Glyceryl Caprylate
(Dermosoft GMCY, Dr. Straetmans)
1.00 %
Processing:
1. Heat phase A to approx. 80-85 °C.
2. Premix and grind phase B.
3. Add phase B to phase A and stirr gently at 80 °C
for several minutes.
4. Cool to 75 °C with gentle stirring.
5. Add phase C with gentle stirring.
6. Pour mixture into moulds and cool down to room
temperature..
W/O MakeMake-up Foundation
(CSS 5/115/11-5)
Phase A
Natural W/O Body Lotion
(CL 21/1121/11-1)
Phase A
ISOLAN® GPS
(Polyglyceryl-4 Diisostearate/
Polyhydroxystearate/Sebacate
3.00 %
Hydrogenated Castor Oil
0.25 %
Ozokerite
0.25 %
ISOLAN® GPS
(Polyglyceryl-4 Diisostearate/
Polyhydroxystearate/Sebacate)
2.50 %
TEGOSOFT® CT
(Caprylic/Capric Triglyceride)
7.50 %
TEGOSOFT® AC (Isoamyl Cocoate)
6.00 %
TEGOSOFT® DEC (Diethylhexyl Carbonate)
5.00 %
TEGOSOFT®
Buxus Chinensis (Jojoba Oil)
TEGOLON® ECO 10-10
3.00 %
Phase B
Hydrogenated Castor Oil
0.40 %
Beeswax
0.60 %
Phase C
Water
70.00 %
Glycerin
3.00 %
Panthenol
0.50 %
Magnesium Sulfate Heptahydrate
1.00 %
Sodium Benzoate, Potassium Benzoate,
Aqua
(Euxyl® K 712, Schülke)
0.50 %
Citric Acid (10 % in water)
q.s.
Phase Z
Perfume
q.s.
Processing:
Processing:
10.00 %
AC (Isoamyl Cocoate)
8.00 %
Phase B
Titanium Dioxide, Cyclopentasiloxane,
Dimethicone,Disodium Stearoyl Glutamate,
Alumina (MiBrid SA/NAI TR-10/D5, Miyoshi
Kasei)
7.70 %
0.53 %
Red Iron Oxide, Cyclopentasiloxane,
Dimethicone, Disodium Stearoyl Glutamate,
Alumina (MiBrid SA/NAI R-10/D5, Miyoshi
Kasei)
Yellow Iron Oxide, Cyclopentasiloxane,
Dimethicone, Disodium Stearoyl Glutamate,
Alumina (MiBrid Y-10/D5, Miyoshi Kasei)
1.60 %
Black Iron Oxide, Cyclopentasiloxane,
Dimethicone, Disodium Stearoyl Glutamate,
Alumina (MiBrid SA/NAI B-10/D5, Miyoshi
Kasei)
Phase C
Water
0.30 %
58.67 %
Glycerin
3.00 %
1. Homogenize phase A.
Magnesium Sulfate Heptahydrate
1.00 %
2. Add phase B to phase A and heat to 80 °C while
stirring.
Phase D
TEGOLON® ECO 10-10
5.00 %
3. Adjust the pH of Phase C to 5.0-5.5.
4. Add phase C to phase AB slowly while stirring.
Phase Z
Phenoxyethanol, Methylparaben,
Ethylparaben (Saliguard MEPX, Salicylates)
5. Homogenize.
Processing:
1.
2.
3.
4.
5.
0.70 %
Heat phase A to 80 °C.
Add phase B to phase A and homogenize.
Add phase C to phase AB slowly while stirring.
Homogenize.
Add phases D and Z under 30 °C while stirring.
D 01/12

Download Report