DEMKO CERTIFICATE Certificate No. Page Date of Issue D-01881-A1 1/3 2014-08-14 Certificate Holder SL POWER ELECTRONICS CORP BLDG A 6050 KING ST VENTURA CA 93003 UNITED STATES Manufacturer SL POWER ELECTRONICS CORP BLDG A 6050 KING ST VENTURA CA 93003 UNITED STATES Production site SL XIANGHE POWER ELECTRONICS CORP NO 4 SHUANGXING NORTH RD XIANGHE ECONOMIC & TECHNOLOGICAL DEVELOPMENT ZONE XIANGHE HEBEI 065402 CHINA See Page 2 Certified Product Model Switching Power Supply GB110SXXYWW, LB115SXXYWW See Page 2 Trademark Rated Voltage / Frequency Rated Current / Power Insulation Class Degree of protection (IP) Tested acc. to Test Report No. Additional Expire date Certification Manager Jan-Erik Storgaard Certification Body SL Power 100-240 Vac, 50-60 Hz 2.0A I (earthed) or II (double insulated) X0 EN 60950-1:2006, EN 60950-1:2006/A11:2009, EN 60950-1:2006/A1:2010, EN 60950-1:2006/A12:2011 E135803-A71-CB-1 issued on 2014-08-14 See Page 2 2016-07-02 This is to certify that representative sample(s) of the Product described herein (“Certified Product”) have been investigated and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the D Mark Requirements. The Designated Certificate holder is entitled to use the  or for cables <DEMKO for the Certified Product manufactured at the production site(s) identified above, in accordance with the D Mark Service Agreement, including without limitation the D Mark Testing and Certification Services Service Terms. Only those Products bearing the D Mark should be considered as being covered by UL’s D Mark Service. This Certificate shall remain valid through the expiration date, unless terminated earlier in accordance with the Service Agreement including without limitation if the Standard identified on this Certificate is amended or withdrawn prior the expiration date. UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com Appendix DEMKO CERTIFICATE Certificate No. Page Date of Issue D-01881-A1 2/3 2014-08-14 Model Details: GB110SXXYWW, LB115SXXYWW Where XX represents output voltage which may be any number from 12 to 56, Y can be K (for Class I construction) or C (for Class II construction), WW may be any number from 00 to 99 or blank, designates additional configurations indicating non-safety related options. Production Sites: INDUSTRIAS S L S A DE C V CIRCUITO SIGLO XXI 2055 COL PARQUE INDUSTRIAL EX-XXI 21254 MEXICALI BC MEXICO External Certification Information: The certificate has been issued on the basis of CB certificate No.US-20115-A1-UL, issued by UL (US) dated 2014-08-14 Additional Information: This certificate replaces the earlier issued Demko certificate No. D-01881 issued on 2012-11-07 due to change output rating, add model name, revise and add Components. Testing done under the Supervised Manufacturer´s Testing (SMT) procedure Certification Body UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com Appendix DEMKO CERTIFICATE Certificate No. Page Date of Issue Certification Body D-01881-A1 3/3 2014-08-14 UL International Demko A/S, Borupvang 5A, DK-2750 Ballerup, Denmark, Tel. +45 44 85 65 65, [email protected] www.ul-europe.com