Wireless Access Guide This document will show you how to connect to the Western Sydney Institute wireless network to browse the internet. Wireless internet coverage is available in all library areas and in most locations in the college. You will require: A wireless capable device Your valid DEC username and current password These instructions (overleaf): A. How to connect to Western Sydney Institute Wireless. B. Configuring proxy settings Forgotten your password? Contact Customer Service or Library Staff for assistance Troubleshooting: If you cannot connect to the internet after configuring the proxy settings and entering your current DEC username and password, please check the settings again for any typing errors, etc. Disclaimer: * Library Staff do not accept responsibility for the misuse or misreading of this brochure. Library staff may not be able to assist you with technical or hardware issues with your device. * Please take note of your current internet configuration before making changes TAFE NSW – Western Sydney Institute Created: 20/01/2014 Version: 1.0 Wireless Access Guide.docx Modified: 20/01/2014 Page 1 of 4 Windows Connection 1. Select the wireless Icon 2. Select “detnsw” 3. Click “Connect” found in the bottom right hand corner 4. When Prompted for network authentication enter DEC Username with @detnsw at the end, EG: John.smith@detnsw and current password. 5. A windows alert prompt will appear. Click connect 6. Computer will now be connected to detnsw wireless network. TAFE NSW – Western Sydney Institute Created: 20/01/2014 Version: 1.0 Wireless Access Guide.docx Modified: 20/01/2014 Page 2 of 4 7. Click on Internet explorer icon. 8. User will be prompted for proxy authentication settings. Eg: john.smith and current DEC password 9. User will now be able to access the internet. NOTE: If user is unable to connect to the internet, follow the proxy setup steps Apple connection – iPhone / iPad 1. Select "settings" 2. Select "Wi-Fi" 3. Select the blue arrow next to "detnsw" 4. Scroll down to "HTTP Proxy" and select "Auto" 5. Enter the following address http://pac.det.nsw.edu.au/tafe/wsi.pac 6. Select "Wi-Fi" networks to return to WIFI selection screen 7. You will be prompted to enter username and password. 8. The correct syntax is; DEC User ID@detnsw (John.smith1@detnsw), Dec Portal Password 9. You will be prompted to accept a certification for client authentication. (accept) 10. You will now be connected to "detnsw" Note: When you change your password you will need to “Forget this Network” and follow these instructions again to connect with your new password TAFE NSW – Western Sydney Institute Created: 20/01/2014 Version: 1.0 Wireless Access Guide.docx Modified: 20/01/2014 Page 3 of 4 Android connection Due to multiple varieties of Android Operating System and devices we are unable to provide complete connection instructions . You will be required to find the closest related possibility to the option listed below. 1. Select “Settings” 2. Select “Wi-Fi settings” 3. Select “detnsw” 4. Scroll down to “Identity” 5. Enter DET username@detnsw (john.smith1@detnsw) 6. Enter Password (DEC portal password) 7. In Proxy setting, Select “Manual” Note: If you cannot see the proxy settings please select advance option first, then go proxy setting and select manual 8. Enter in Hostname “proxy.det.nsw.edu.au” 9. Enter 8080 in the proxy port 10. Click OK 11. You will now be connected to “detnsw” Note: When you change your password you will need to “Forget this network” and follow these instructions again to connect with your new password. To forget the network, go back to Wi-Fi settings and click on “detnsw”. This will give you the option to forget network TAFE NSW – Western Sydney Institute Created: 20/01/2014 Version: 1.0 Wireless Access Guide.docx Modified: 20/01/2014 Page 4 of 4