Mars ClimaPlus ™ ™ Fine-textured panel Indoor Environmental Quality • CLIMAPLUS ™ AntiMicrobial Treatment: Provides dual inhibition of mold/ mildew and odor/stain-causing bacteria. • Classified as low-formaldehyde according to standards established by CHPS, the State of Washington, ASHRAE, and ANSI. Features and Benefits • Fine, monolithic texture. • High light reflectance (LR .89). • Excellent noise reduction (NRC .70). • D u r ab l e, s cr a t ch - re s i st a n t, cleanable surface. • Low maintenance panels look like new for years to come. • CLIMAPLUS 30-year lifetime system warranty to withstand conditions up to 104 ˚F (40 ˚C)/ 95% relative humidity without visible sag when used with a USG Donn® brand suspension system. Applications • Corridors • Department stores • Executive offices • Offices with indirect lighting • Reception areas and lobbies • General office spaces Substrate MARS Panels with CLIMAPLUS AntiMicrobial Treatment/DONN Brand DX/DXL Suspension System X-Technology mineral fiber Mars ClimaPlus Acoustical Ceilings Technical Service 800 USG.4YOU Web Site www.usg.com Samples/Literature 888 874.2450 Samples/Literature Fax 888 874.2348 Customer Service 800 950.3839 Literature Number SC1966 UL Classified MARS CLIMAPLUS Panels Edge Panel Size Class Item No. NRC CAC Min.1 LR2 Color Grid VOC Anti-Mold Anti-Odor/ Recycled Panel Options Class.3 & Mildew Stain Bacteria Content4 Cost (SQ) 2!x2!x3/4" Class A 86185 .70 35 .89 White A, B, C Low o 2!x4!x3/4" Class A 88185 .70 35 .89 White A, B Low o 2!x2!x3/4" Class A 86785 .70 35 .89 White D Low o 2!x4!x3/4" Class A 88785 .70 35 .89 White D Low o 2!x2!x3/4" Class A 86985 .70 35 .89 White E, F, G Low o 2!x4!x3/4" Class A 88985 .70 35 .89 White E, F, G Low o (SLT) (FLB) A DONN® DX®/ DXL™ B DONN® DXW™ C CENTRICITEE™ D DONN DX/DXL E CENTRICITEE F FINELINE® 1/8 # 74% $$ # 74% $$ # 74% $$ # 74% $$ # 74% $$ # 74% $$ G FINELINE® Grid Profile Options o CLIMAPLUS AntiMicrobial Treatment: Provides dual inhibition of mold/mildew and odor/stain-causing bacteria.5 # Inhibits or retards the growth of Gram-positive and Gram-negative bacteria. ASTM E1264 classification Type IV, Form 1 and 2, Pattern E, G ASTM E84 surface burning characteristics Class A Flame spread: 25 Smoke developed: 25 Weight .96 lb./sq. ft. Thermal resistance R-2.2 Maximum backloading See Warranty for details. Maintenance Can be cleaned easily with a soft brush or vacuum. Scrubbability Using the Gardner Scrubbability Test, 150 scrub cycles without surface break (ASTM D2486). Surface scratch No visual damage by a metal shim of up to 20 mils using a surface scratch test. Edge damage resistance Weight loss not to exceed 25-35% using the Friability Tests per ASTM C367. Panel edge should withstand compression of a 1/4" blunt pin for at least 100 lbs. per square inch. Independently verified performance test results available upon request. Manufactured by USG Interiors, Inc. 125 South Franklin Street Chicago, IL 60606 Water resistance Absorption of 1,660 gm/m2 per Cobb test (T 441 om-84) Footnotes 1. Adding sound masking can be as effective as using a ceiling panel with a higher CAC rating, providing increased privacy between enclosed office spaces. 2. LR values are shown as averages. 3. Formaldehyde VOC Classification. Classified as low-formaldehyde according to standards established by the Collaborative for High-Performance Schools (CHPS), the State of Washington, the American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), and the American National Standards Institute (ANSI). 4. For details, see the Sustainability selector. 5. Panel face and back surfaces treated with a patented, broad-spectrum antimicrobial standard formulation that inhibits and retards the growth of mold/ mildew, fungi, yeast, and odor/ staincausing Gram-positive and Gramnegative bacteria. For details, see Ceiling Systems Warranties and Limitations (SC2102) and CLIMAPLUS Ceilings Certification of Performance (SC2451). Safety First! Follow good safety and industrial hygiene practices during handling and installation of all products and systems. Take necessary precautions and wear the appropriate personal protective equipment as needed. Read material safety data sheets and related literature on products before specification and/ or installation. The following are trademarks of USG Interiors, Inc. or a related company: CENTRICITEE, CLIMAPLUS, DONN, DX, DXW, FINELINE, MARS, USG. SC1966/ECM1/rev. 11-06 © 2006, USG Interiors, Inc. Printed in U.S.A.