FDT / DTM HART programming adapter

FDT / DTM HART programming adapter
IM-PROG
The IM-PROG is intended for the parametrization of TURCK devices with PACTware via
the serial interface of a PC.
TM
For this, the interface module to be
parametrized is connected via the IM-PROG
to the serial interface of the PC, using the included connection cable.
The IM-PROG converts the signal level and
implements the galvanic isolation.
■ PC adapter for programming of TURCK-PACTware devices
Additionally, the parameters can be stored on
the PC or printed.
■ Galvanically isolated transmission of
signals
Edition • 2016-03-25T03:00:37+01:00
The interface device has to be powered for
parametrization.
1/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
FDT / DTM HART programming adapter
IM-PROG
IM-PROG
6890422
Weight
116 g
Dimensions
Edition • 2016-03-25T03:00:37+01:00
Type code
Ident no.
2/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Download Report