Frequency generator

NOTE:
Frequency generator
FG1 FREQUENZGENERATOR Article no longer available!
The TURCK frequency generator FG1 is used
for the simulation of NAMUR sensors according to DIN EN 60947-5-6 or NO contacts. The
NO output is protected by a Zener diode and
a self-restoring fuse which activates at approx.
200mA.
Isolating switching amplifiers or counter modules can be function tested with the frequency
generator.
Power supply is provided via a 9 V block battery, allowing operation for 60 hours with 500
mAh.
The device is switched on/off with a button at
the front. The device turns off automatically after 20 min.
■ Simulation of sensors according to DIN
EN 60947-5-6 (NAMUR) or NO contacts
■ Frequency range: 0.01…99,900 Hz
(0.01…999,000 )
min-1
■ Internal voltage supply via 9 V block
battery (6 LR 61)
Power ON is indicated by a green LED at the
front.
The decimal places 0.01 to 9.99 of the frequency, the frequency range 1 Hz to 10 kHz
(i.e. 10 min to 100000 min ) as well as different pulse pauses in percentage can be adjusted with a coding switch.
-1
Edition • 2015-10-24T20:39:06+02:00
-1
1/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Frequency generator
FG1 FREQUENZGENERATOR
FG1 FREQUENZGENERATOR
6900277
IP Rating
Ambient temperature
Weight
IP20
-25 …+75 °C
442 g
Dimensions
Edition • 2015-10-24T20:39:06+02:00
Type code
Ident no.
2/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Download Report