press release

FONDMETAL S.p.A.
Via Bergamo, 4
I - 24050 PALOSCO (Bergamo) - Italia
Telefono
+39 035 845130
Telefax
+39 035 845785
www.fondmetal.com
[email protected]
COMUNICATO STAMPA
Palosco, 19/05/2014
FONDMETAL STC-10: STRONG WHEELS WITH A CONCAVE DESIGN
A wheel with a strong style and so much innovation as to highlight one of the inspiring concepts at
the bottom of all Fondmetal projects: dynamism.
After the Fondmetal 9XR, the new SuperTuning line is enriched with a new wheel in which nothing
is conventional, the SuperTuning Concave STC-10, a powerful and fascinating 10 spokes that
converge towards the centre, where the hub-cap with the Fondmetal brand is particularly evident.
The thin spokes, matched in elegant V-shaped pairs, make it an above-average wheel.
The peculiarity of this rim is the different design between front and rear, a Deep Concave design:
playing with concavities bestows a very aggressive look that captures the attention even when the
car is not on the move.
The proposed finishings are two, both matt, to underline the technical character of the product: the
aggressive Black milled, that is black with polished milling on the spokes, and Titanium, i.e. matt
Titanium.
The STC-10 is only offered in 5 holes and the available size range is very wide. Starting with 8x19,
gradually up to 9x19, 9x20, 11x20, 9x22 and reaching up to 11x22. It is a wheel basically
developed for the most prestigious and luxury cars, such as last generation of sedans and SUVs:
AUDI Q7 or A4, BMW Z4 and 5-Series, NISSAN Murano, DODGE Avenger, PEUGEOT 4008,
VOLKSWAGEN Eos, DACIA Duster, FORD Focus, MERCEDES SL, CITROEN C4, SKODA
Octavia. A wheel with a sporting vocation, where dynamism and clean shapes are a distinctive
feature.
The Fondmetal STC-10 can withstand extremely high stress thanks to its top structural values.
This is confirmed by the following data:
Partita IVA 01821800164 - Cod. Fisc. / C.C.I.A.A. BG R.I. 02117500179 - C.C.I.A.A. BG R.E.A. 240093
Capitale Sociale € 3.120.000 i.v. – Pos. Meccanografica BG 002858
Cod. di identificazione CEE IT 01821800164
FONDMETAL S.p.A.
Via Bergamo, 4
I - 24050 PALOSCO (Bergamo) - Italia
Telefono
+39 035 845130
Telefax
+39 035 845785
www.fondmetal.com
[email protected]
Sizes
Offset
Rigidity
(KNm/rad)
COMUNICATO STAMPA
Frequency
Central Hub and
spokes
Rim
(Hz)
Fatigue
resistance
Rolling
workload circumference
(Kg)
(mm)
Weight*
(Kg)
(Hz)
8X19
48
1373,65
281
593
820
2254
12,58
9X19
50
1465,91
254
496
975
2254
15,20
9X20
50
1437,31
234
571
900
2405
15,44
11X20
50
1550,78
289
703
1000
2254
18,80
9X22
52
1636,94
205
508
1000
2405
17,99
11X22
55
1444,35
257
614
1000
2405
20,85
* subject to a 5% variation
Continuous research into total quality is currently ensured by top-level certifications:
-
for product quality: TÜV, JWL, VIA standards
-
for the quality of the manufacturing process: ISO/TS 16949:2009
-
for the environmental protection: ISO/TS 16949:2009
End press release
Partita IVA 01821800164 - Cod. Fisc. / C.C.I.A.A. BG R.I. 02117500179 - C.C.I.A.A. BG R.E.A. 240093
Capitale Sociale € 3.120.000 i.v. – Pos. Meccanografica BG 002858
Cod. di identificazione CEE IT 01821800164

Download Report