Heat Insulation Insulating and Waterproofing Systems

0,023
Heat Insulation
Insulating and Waterproofing Systems
RF3
D = 0,023 W/mK
Polyiso foam panel coated with
multilayer Duotwin® permeable to
vapour and tight to water.
UNI EN 13165
UNI EN 13165
PRECISO RF3
D = 0,023 W/mK
The Isolparma RF3 panel may be
supplied with Preciso processing
which involves cuts and/or incisions
made to measure, to ensure perfect
adherence to buildings, structural or
architectural elements, etc.
Recommended applications:
zz Heat insulation of perimeter walls in cavities
zz Heat insulation of floors and ceilings
zz Heat insulation of ventilated and non-ventilated pitched roofs
zz Heat insulation of industrial tiled roofs or sheds
Warning:
Isolparma RF3 boards are not suitable
for roofing applications in combination
with a propane torch. For such
applications ISOPLAN PUR RF3 is
recommended.
MISTRAL PIR RF3
D = 0,023 W/mK
Mistral is a pre-assembled insulated
and ventilated roofing element that
combines a base of rigid thermoset
polyisocyanurate board, CFC and
HCFC free, with Polytwin® facing
on both sides and an OSB 3 board
top, raised on polyurethane bearing
pads, to create a bi-directional air
chamber. Mistral is sutiable also
for use in environments with high
relative moisture.
On request the OSB3 board can
be replaced with plywood or other
types of wood with various finishes
and thicknesses.
Recommended applications:
zz Heat insulation of ventilated
pitched roofs under flat or
bent tiles. The OSB3 top is
suitable to receive any type of
waterproofing finish.
UNI EN 13165
UNI EN 1398
2004
ISOPLAN PIR RF3
D = 0,023 W/mK
Isoplan PIR is a pre-assembled
roofing element consisting of a
flat (or cut-in) rigid thermoset
polyisocyanurate board, available
with various facing materials
(Duotwin®, embossed aluminium,
glass)
topped by a bituminous
underlay membrane of choice.
The bituminous underlay membranes
can be aap- or sbs- modified, glass
or polyester reinforced.
The boards have a head and side
selvedge that may vary from 5 to 10
cm.
PRECISO ISOPLAN PIR RF3
D = 0,023 W/mK
PRECISO ISOPLAN PUR RF3 is a
heat-insulating and waterproofing
system consisting of pre-marked
panels of polyiso foam coated with
Duotwin®, made to measure with the
Preciso system, pre-bonded to a
waterproofing membrane of choice.
The membranes can be app- or
sbs-modified, polyester or glass
reinforced, of various thickness or
weight and with a smooth or slate
finish.
The boards have a head and side
selvedge that may vary from 5 to 10
cm.
Recommended applications:
zz Heat insulation and base sheet waterproofing for most types of civil and
industrial flat or pitched roofs and sheds.
zz Heat insulation and base sheet waterproofing of industrial tiled or shed
roofs
(*):
The CE marking refers to the harmonised technical standards of each component.
λD = 0,023 W/mK - THE ADVANTAGES
The low heat conductivity value
of Isolparma RF3 insulations,
enables the design and construction
of efficiently insulated building
structures
using
thicknesses
of insulating material that are
significantly lower than those
required using alternative materials.
Reducing the volume of insulating
material, with the same performance,
involves:
zz improving the ratio between built
volume and living space
zz reducing the economic costs
caused by the transport and
installation of the material
zz reducing
the
environmental
impact
generated
by
the
production and transport of
the materials and subsequent
disposal thereof at the end of
their working life.
Isolparma RF3 Rigid Foam boards
made of polyiso foam faced with
multilayer Duotwin® or Politwin®
linings, also ensure:
zz stability
of
the
technical
characteristics and performance
over time
zz rigidity and compactness
zz safety in use and environmental
compatibility
zz resistance to the most common
physical and chemical agents
and to the working temperatures
zz high quality standards and
conformity with the European
technical standard UNI EN 13165
Thicknesses of alternative materials necessary to match the performance of
ISOLPARMA RF3 Rigid Foam board, 100 mm thick:
U = 0,23 W/m2K
W
Mi
λ = ood
Ex
ne
λ
D
r
Po
0,0 woo
D=
λ = trud
Po
0,0 al w
lys
42 l
D
e
λ
o
0
d
l
Po
38 ol
W/
,03 p
D=
λ = yst
0,0 tyren
o
mK
W
D
y
6
λ = liys
0,0 ren
/m
35 e
W/ lyst
D
f
K
31 e
0,0 o IS
y
m
oa
W
r
f
K
e
/m m
W/ oa
23 OL
ne
K
mK m
W/ PA
wi
mK RM
t
hg
A
RF
rap
3
hit
e
Valori di Trasmittanza termica (U in W/m2K) e di Resistenza termica (R in m2K/W)
in funzione dello spessore
mm
30
40
50
60
70
80
90
100
110
120
U
0,80
0,60
0,48
0,40
0,34
0,30
0,27
0,24
0,22
0,20
R
1,30
1,74
2,17
2,61
3,04
3,48
3,91
4,35
4,78
5,22
RF3 other caracteristics
Compression resistance (10% crushing - EN 826)
Water absorption (total immersion 28 days - EN 12087)
Resistance to vapour diffusion (EN 12086)
Euroclass Fire Reaction (EN 13501-1)
130-150 kPa
according
to thickness
< 1% in weight
μ 148 ± 24
F
SERIES RF3 standard measurements
flat dimensions mm
Thickness mm
1200 x 600
from 30 to 120
1200 x requested measurement
600 x requested measurement
from 30 to 120
MISTRAL PIR RF3
1200 x 585
panel from 40 to 120
air chamber 40
OSB 12
ISOPLAN PIR RF3
1200 x 1200
from 30 to 120
1200 x requested measurement
from 30 to 120
RF3
PRECISO RF3
PRECISO ISOPLAN PIR RF3
Isolparma Srl - Via Mezzavia 134 - 35020 Due Carrare (PD) Italy - ph +39 049 9126213 fax +39 049 9129616
www.isolparma.it

Download Report