ONZE CORE BUSINESS GEAUTOMATISEERDE MATERIAL HANDLING SYSTEMEN • Van Concept tot Life Cycle Support • Van klein tot groot Slide 1, BRANCHES 48% Bagageafhandeling Distributie Expres pakketdiensten Services 16% 19% 17% Orderontvangsten boekjaren 2007-2011 Slide 2, REFERENTIES Bagageafhandeling Distributie Expres pakketdiensten Services > 600 > 1000 > 350 > 800 Slide 3, DE ONDERNEMING • > 60 jaar ervaring • Netto-omzet EUR 566 miljoen • Onafhankelijk • Mondiale aanwezigheid Slide 4, TOPKLASSE PRODUCTEN EQUIPMENT & IT • Uitgebreid assortiment kernproducten • Standaard bouwstenen • Innovatief Slide 5, WAT DOET R&D? Uitvoeren van Feasibility studies Bijhouden en uitrollen van nieuwe technologieën Kennis onderhouden van product behoeftes in de markt en van producten van concurrenten Ontwikkeling van nieuwe producten Inrichten van de organisatie voor het toepassen van nieuwe producten (supply chain, engineering tools, documentatie,…) Inrichting en onderhoud tooling voor gebruikers Product onderhoud en verbeteren bestaande producten Bewaken intellectual property (patenten) Beheer Innovation Centre Slide 6, LOW PRUDUCT DETECTION On the CROSSORTER 1500, 1200, 700 CASE LEMMER 2012 Slide 7, LOOP SORTER Slide 8, CROSSORTER Robust High performance Cost efficient Eco effective Slide 9, CAPACITY Features (1500) −800 mm carrier pitch −Up to 3 meters per second −13,500 carriers per hour Conveyability −Closed deck, also in curves −Max variety of goods −Max dimensions: 1500x800x800 mm; 50 kg Slide 10, MECHANICAL TOLERANCES Mechanical tolerance is max. 8 mm Sorter type Low product SCS 700 < 8 mm SCS 1200 < 10 mm SCS 1500 < 10 mm Slide 11, ONE SOLUTION FOR ALL CROSSORTERS Per year around 150-200 LPD’s to be added Solution cost price targetted at 2.500 Euro Feaseability showed vision technology too expensive − around 18-20KEuro cost price Proof of Concept with Sick Inspector camera was succesfull − High-speed part inspection in VGA resolution (640 x 480) − Ethernet IP connectivity − part cost price 500 euro − disadvantage light needed for contrast Slide 12, VI SOLUTION - LOW PRODUCT DETECTION Slide 13, Slide 14, Slide 15, LOW PRODUCT DETECTION EXPLAINED •Camera is triggered by contrast differences with respect to crossbelt • Dark, non-reflecting products will not be detected • Best detection position is in the middle of crossbelt • Red Laser light is used for contrast detection •Normal PEC is always leading, LPD detection is therefore only for products; •<8mm (SCS700) •<10mm (SCS1500) •Low products only single cell loading •Otherwise two products will be detected Slide 16, Slide 17, OUR OBJECTIVE WITH THE CURRENT LPD The LPD function is to detect objects which cannot be detected by a standard PEC. Slide 18, LOW PRODUCT DETECTION DESIGN Local controls design •Local controller handles masking of space in between crossbelts Blind spot • At each side of the belt 30mm blind spot where products will not be detected by LPD • So 85% of SCS700 and 88% of SCS1500 belt is within detection window Slide 19, OUR CHALLENGES… (current solution) Improved detection of beginning and end of carrier belt (next solution) Detection of products also between carriers To consider − installation and configuration (no expert level) − serviceabiltiy and diagnostic (no expert level) − international rollout (robuustness) − lifetime of carrier belt and polution (robuustness) − diagnostic (in case of increasing probability of failures (proactive)) Slide 20, A CASE FOR YOU? Slide 21,
© Copyright 2025 ExpyDoc
