Technical data sheet CMB-VF-LONOX boiler Dry cargo ships Tankers LNG carriers Passenger ships CMB-VF-LONOX boiler The innovative SAACKE vertical composite boiler also covers variable demands for steam on almost all ship types, and saves Technical data: CMB-VF-LONOX Applications on the need for an entire auxiliary boiler plant. The plant achieves a maximum fired steam output of up to 18 t/h. Dry cargo ships, tankers, LNG carriers, passenger ships A good control range is achieved using a rotary cup burner. Steam output CMB-VF-LONOX CMB-VF up to 13 t/h up to 18 t/h The boiler control is fully automatic. If another auxiliary boiler Fuels MGO, HFO, gas Control range up to 1:25 The boiler system is also compatible with dual fuel applications Low NO X emissions and can be delivered with flue gas recirculation for emissions (without secondary measures and Natural gas: 200 mg/Nm³ Light oil:300 mg/Nm³ in the Ultra-Low NO X range if desired. based on 3% O 2 in the exhaust gas) is included in the equipment, for example on larger tankers, this boiler and the CMB-VF can be operated in a master-slave mode. (fuel-nitrogen content approx. 0.02 percent by weight) Heavy crude oil:800 mg/Nm³ The CMB-VF-LONOX halves your entire boiler system as a low-emission 2-in-1 solution without compromising the steam output. (fuel-nitrogen content approx. 0.4 percent by weight) CMB-VF-LONOX dimensions Plan view Product information Unrivalled capacity range High control range Low maintenance expense Reduction in acquisition, operating and maintenance costs C Compact 2-in-1 boiler solution Extremely low-emission combustion Side view Rev. No. Date Made by B coarse very coarse Checked Approved Order-No. Type CMB-VF-12+0,5/7 Definition tae Surface information acc. DIN ISO 1302 Material Drawing-No. Allowable variations for measurements acc. DIN 28005 Weight CN-08265700_rev.1 35900 kg Format A0 Sheet 2 Copyright and related rights for using documents acc. DIN 34 Date Serial-No. Hull-No. Approved 19.08.14 18 t/h Low NOX* steam output combustion *U p to an output of 13 t/h D A Rev. Date No. Made by medium coarse very coarse Allowable variations for measurements acc. DIN 28005 Hull-No. 13.08.14 tae Checked mark applicable with X fine Name Date Kaiserstr. 4 / D-24143 Kiel General Tolerance acc. to DIN ISO 2768-1 Surface information acc. DIN ISO 1302 Checked Date Approved Serial-No. Client Date Name SCALE: 1:15 Approved 19.08.14 tae Order-No. Type CMB-VF-12+0,5/7 Definition Material Drawing-No. Weight CN-08265700_rev.1 35900 kg Copyright and related rights for using documents acc. DIN 34 Format A0 Sheet 2 Boiler data Steam output of the oilfired part Steam output of the exhaust gas part Design pressure t/h t/h MPa 18 1 1.0 15 **** 1.0 12 1.03 1.0 Main engine MAN B&W 6S50ME-B9.3 at 90% MCR ISO 1 x MAN B&W 6S50ME-B9.5 TII A* B C D Dry weight ** Water volume for NWL Recommended burner type*** mm mm mm mm kg m3 3,860 10,700 3,388 200 44,000 38,5 SKV 150 **** **** **** **** **** **** SKV 150 3,410 9,895 3,388 200 35,900 28,5 SKV 100 at 71% MCR ISO 2 x MAN B&W 6L23/30H Mk2 TII at 85% MCR ISO 10 **** 1.0 **** **** **** **** **** **** SKV 80 8 **** 1.0 **** **** **** **** **** **** SKV 60 6 **** 1.0 **** **** **** **** **** **** SKV 50 * Including insulation ** Including insulation, refractory, valves and recommended burner *** Recommended burner type based on 60 Hz; the burner type may differ at 50 Hz **** Dimensions, weight and steam output of the exhaust gas part are derived from the exhaust gas data for the main engine SAACKE GmbH Südweststraße 13 28237 Bremen, Germany Tel. +49 421 6495-0 Fax +49 421 6495-5363 [email protected] www.saacke.com 0-0750-0101-02 medium 13.08.14 tae Checked mark applicable with X fine Name Date Kaiserstr. 4 / D-24143 Kiel General Tolerance acc. to DIN ISO 2768-1 Date Name SCALE: 1:15 Client
© Copyright 2024 ExpyDoc
