PRODUCT DATA Ashland Specialty Ingredients ashland.com Page 1 of 2 NUMBER 5015-E SunCare™ UV concentrate Lignin protection additive Description SunCare UV concentrate additive is a lignin protection and stabilizing additive for primers and stains that are used with UV-cured or oxidative drying topcoats. It delivers a foundational level of protection against photo-oxidation and other types of degradation in untreated interior and exterior woods. Because SunCare UV concentrate additive stabilizes the lignin in the wood itself, formulated wood treatment products using this technology exhibit consistently higher levels of protection and long-term performance that can enable warrantable ‘long-lasting’ claims on finished products. Key Attributes Stabilizes lignin against photo-oxidation Prevents yellowing caused by UV radiation Allows formulation of premium wood protection products Performs with UV-cured or oxidative drying top coats Provides long-lasting protection of wood against degradation VOC free and surfactant-free Applications and Usage Notes SunCare UV concentrate additive can be used in interior and exterior primers and stains that are used with UV-cured and oxidative drying top coats. Typical usage rate varies with substrate and should be determined via laboratory tests. Organic solvents should be avoided in primer formulation. Recommendation for parquet application SunCare UV concentrate additive can easily be applied after dilution 1:1 to1:2 with water by dipping, spraying or other application methods. In roller applications SunCare UV concentrate additive can be applied as it is. Substrate Wood, low density Wood, high density Recommended use level (not diluted) 2 8 – 12 g/m 2 5 – g/m Expert formulation support is available for SunCare UV concentrate additive in wood protection products. Exact dosage varies with the substrate and should be determined by suitable laboratory tests. Typical Product Properties Description Appearance Odor Density(20 °C) Lignin protection and stabilization additive Pale yellow solution No odour 1.03 – 1.06 g/ml All statements, information, and data presented herein are believed to be accurate and reliable, but are not to be taken as a guarantee, an express warranty, or an implied warranty of merchantability or fitness for a particular purpose, or representation, express or implied, for which Ashland assumes legal responsibility. ®Registered trademark, Ashland or its subsidiaries, registered in various countries. ™Trademark, Ashland or its subsidiaries, registered in various countries. *Trademark owned by a third party. © 2014, Ashland. Rev. 01-2014 Page 2 of 2 Solubility Stability Water soluble Stable under mildly acidic to alkaline (up to pH 10) conditions. Should be incorporate into formulation between 5°C and 40°C. Short term exposure to temperatures up to 80°C can be tolerated. Strong oxidants, reducing agents and strong acids will lead to decomposition of active ingredients. Typical primer formulation for interior and exterior use(1) Ingredient Addition (%) Description Source Water 61.2 Setaqua* 6782 18.0 Binder Nuplex Neorez* R2020 8.0 Binder DSM Nuosept™ BMc 422 incan preservative 0.3 Biocide Ashland Byk* 348 0.2 Wetting agent BYK Chemie Dibutylglycol 2.0 Coalescent WetCare™ additive 2.0 Hydrophobic agent Ashland SunCare™ concentrate 5.0 Lignin stabilization Ashland Surfynol* B-104 0.5 Wetting agent Air Products Drew™ 210-886 0.5 Antifoam Munzing Chemie Fungitrol™ L30 BDG fungicide 2.3 Biocide Ashland 100% Recommended application rate = 100 g/m 2 (1) The above starting formulation is based on Ashland testing and knowledge, it is the customers ultimate responsibility to ensure their products meet their in house and end use needs Packaging Information Product Physical Form Pkg Type Net Wgt (kg) SunCare UV Concentrate liquid HDPE pail 30 kg SunCare UV Concentrate liquid HDPE drum 200 kg SunCare UV Concentrate liquid HDPE IBC 1000 kg Storage in tightly sealed original containers is recommended at room temperature. Shelf life: 12 months from date of manufacture Transport: SunCare UV concentrate additive is not a hazardous product according to transport regulations. Product Safety Information R & S Phrases, H & P Statements and Labelling: For information regarding labelling of products and the Risk and Safety phrases or Hazard and Precautionary Statements of SunCare UV concentrate additive please seek specific advice from Ashland or refer to the separate Safety Data Sheet (SDS). To learn more, visit ashland.com
© Copyright 2024 ExpyDoc
