WARP DRY CC WARP DRY CC† additive is a specially treated high-quality micronized calcium carbonate used as a weighting agent for applications in oil-base drilling and completion fluids. WARP DRY CC product is a complementary dry additive to WARP Fluids Technology Typical Physical Properties Physical appearance.............................................................................................................................................................................White, cream powder Specific Gravity................................................................................................................................................................................................... 2.68 – 2.72 g/cc Particle Size....................................................................................................................................................................................................... D50 < 2 Microns Applications WARP DRY CC additive is compatible with all base fluid types. The extremely small particle size enables low rheology in non-aqueous drilling fluids (NAF) and Reservoir Drill-In Fluids (RDF) to be formulated with a considerable reduced risk of sag and settlement compared to fluids formulated with SAFECARB†. Developed as a dry additive to increase the mud weight of high-density RDFs, WARP DRY CC additive also can be used as a standalone weighting agent in low density fluids. Potential Applications include: ■■ Reservoir drilling fluids ■■ Through tubing rotary drilling ■■ Horizontal or extended reach drilling ■■ Narrow mud weight windows ■■ High Temperature High Pressure Drilling ■■ Completions: running screens ■■ Wells with a high risk of sag/settlement ■■ Coiled tubing drilling ■■ Slim hole drilling ■■ Logging and testing fluids Advantages ■■ Very high acid solubility ■■ Minimal annular density variation ■■ Low swab-surge pressures ■■ Lower ECDs than conventional RDFs and NAFs ■■ Optimized hydraulics • LWD/MWD and bit performance • Higher ROPs • Extended lateral reach ■■ Reduced drilling and completion cost • Reduced risk of downhole losses • Reduced discharge volumes and consumption rates Benefits compared to SAFECARB ■■ Very low settlement and sag potential ■■ Allows finer shaker screens to be used ■■ Flow through narrow apertures in completion hardware Limitations The dry material cannot be conveyed pneumatically. Toxicity and Handling Bioassay information is available upon request. Normal safety protective equipment should be worn observing the precautions described on the Material Safety Data Sheet (MSDS). Dust mask should be worn while discharging WARP DRY CC additive. For other environmental performance data please contact environmental affairs. Packaging and Storage WARP DRY CC additive is packaged in 2,000 lb big bags. Big bag handling facilities need to be available for onsite rig use. Store in a dry, well-ventilated area. Keep container closed. Store away from incompatibles. Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping and/or stacking. This information is supplied solely for informational purposes and M-I SWACO makes no guarantees or warranties, either expressed or implied, with respect to the accuracy and use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale. Nothing in this document is legal advice or is a substitute for competent legal advice. ©2014 M-I L.L.C. All rights reserved. †Mark of M-I L.L.C. FPB.2305.1401.R1 (E) P.O. Box 42842 Houston, Texas 77242-2842 www.miswaco.slb.com Email: [email protected]
© Copyright 2024 ExpyDoc
