ENERSENS SAS BP 181 23 rue Bossuet Z.I. La Vigne aux Loups 91161 Longjumeau Cedex France Tél. : + 33 (0)1 69 09 77 85 Fax : + 33 (0)1 64 48 23 19 www.enersens.fr ISOGEL® aerogel granulates / beads / powders ISOGEL® is a high performance silica aerogel material developed by ENERSENS® and made at ENERSENS® industrial plant according to a patented process. It features good flowing properties. Customers who need a particular particle size for their application can easily calibrate the beads by crushing them through chosen metal screens. Main characteristics: ISOGEL® Thermal Conductivity @ 20°C @ Patm Particle Size Type of particles Bulk Density Tapped Density Surface Chemistry Pores Diameter Mercury Porosity Specific Surface (N2 BET) Service temperature @ Patm pH stability range Water uptake VOC Minimal ignition energy Minimum Ignition Temperature Calorific value Enthalpy (H) Heat capacity (Cp) at 25°C Resistivity Emissivity Angle of slope Particle compressive strength Tensile Strength (monolith) 18-20 mW/(m.K) depending on granulometry and stacking 1200 - 3500 microns (other sizes upon request) Non spherical particles 68 Kg/m3 (60-90) = 0,90 * apparent density Fully hydrophobic and corrosion resistant 5 to 12 nm 90 - 98% 750 - 950 m2/g -160°C to 250 °C 1 to 9 included 2,4% after 100 days @ 70°C, 50%RH Grade A+ >1000 mJ 470 °C 6 MJ/Kg 38 J/g/°C 1582 J/kg.K 5,9x1013 Ohm.m 0,93 40° 0,3 to 0,8 MPa 10 to 20 kPa For any further enquiry please send a mail to: [email protected] Isogel® datasheet release 2.87 July 2014 ______________________________________________________________________________________________________________________________________________________ Les renseignements contenus dans ce document sont donnés en toute bonne foi dans un souci d’information et ne peuvent en aucun cas engager la responsabilité d’ENERSENS. All information contained herein is believed to be accurate and provided in good faith but without warranty whatsoever. Die Angaben in diesem Datenblatt entsprechen den heutigen Stand unserer Kenntnisse und stellen keine Eigenschaftszusicherung dar. Etwa bestehende Schutzrechte Dritter sind zu berücksichtigen
© Copyright 2024 ExpyDoc
