MEDLEY® Xi - Insight Lighting

MEDLEY Xi
®
SOLID STATE LIGHTING
EXTERIOR ARCHITECTURAL
LED LINEAR LIGHTING
RGB / RGBW COLOR CHANGING
ITEM
EXTERIOR, REMOTE POWER SUPPLIES
RGB / RGBW COLOR CHANGING
Specification
optics
Beam Angles
7°, 15°, 30°, 45°, 100°
Color Temperatures
RGB and RGBW
RGB (COLOR CHANGING) (4 foot fixture)
FIXTURE / WATTAGE
output
- total POWER
CONSUMPTION (W/ft)
OPTICS
9 (12.1 W/ft)
17 (18.9 W/ft)
LUMENS
12°
7°
1044
2247
EFFICACY
22 lm/W
30 lm/W
- LUMENS
MAX CANDELA
5104
25313
- EFFICACY (lm/W)
- Max Candela (CD / m )
2
Electrical
Lumen Maintenance
RGB: 75,000 hrs L70
Input Voltage
120V to 277V
- MEDLEY Xi: Remote Power
Control
DMX Ready
Physical
Dimensions
(Height X Width)
Medley Xi: 1-3/8" X 2-1/4"
Housing
Aluminum extrusion with cast aluminum end caps, powder-coated finish
Lens
Medley Xi : Tempered glass
Operating Temperature
-20° C to 40° C
Certification
Certification
Medley Xi is ETL approved for wet locations.
Medley Xi with remote power supply are ETL approved Class 1
Warranty
5 Year
Limited
All MEDLEY products are tested to IES LM-79, LM-80 and ANSI C78.377A standards
®
7°
15°
30°
45°
100°
RGB & RGBW Color Changing Optics
OPTICS
7°
10°
RoHS
COMPLIANT
15°
20°
30°
45°
100°
5 Year
Limited
Warranty
SEE ORDERING INFORMATION ON PAGE 2
Insight Lighting
www.insightlighting.com
01/20/15
Page 1 of 5
MEDLEY Xi
®
SOLID STATE LIGHTING
EXTERIOR ARCHITECTURAL
LED LINEAR LIGHTING
RGB / RGBW COLOR CHANGING
EXTERIOR, REMOTE POWER SUPPLIES
RGB / RGBW COLOR CHANGING
STEP 1 – SELECT FIXTURE
Prefix
MXi
Wattage
Color
9
9W/Ft
Optics
RGB
12°
20°
100°
(Tri-color)
17
17W/Ft
RGB
U = Up
Mounting
CES = Close End
D = Down
7°
15°
30°
45°
100°
(Discreet)
17
17W/Ft
light
direction
RGBW
Fixture
Length
Power Supply
Location
12"
Remote Power
Supply
TW
Textured White
24"
REM = Remote power
supply
TBL
Textured Black
36"
•Remote power supplies
must be ordered, see
STEP 2 BELOW.
TBR
Textured Bronze
•CRF is recommended
for coastal or extreme
exterior environments.
TN
Textured Natural
•Contact factory for
finishes.
48"
•For remote power
supply plug and play
systems, please contact
factory .
10°
30°
100°
(Quad-color)
•Contact factory for "Discreet RGBW"
Finish
Options
LV = Louver
CRF = Corrosion
Resistant
Finish
TS
Textured
Sandstone
#
SF
Specify Finish
•DMX controls are required for all RGB or RGBW
applications. Contact factory.
#
CC
Custom Color
•One Splitter/LED Programming Kit (CDS-PK) must
be ordered for each RGB or RGBW installation.
See STEP 3 below.
#
Contact factory
• Every fixture is shipped standard as System Control.
Every fixture has the same address.
•If Fixture or Board Control is required, programming
is to be done in the field (by others) with the LED
Programming Kit (CDS-PK).
•9W RGB: Board control is not a standard with 9W RGB.
Contact factory for availability.
Fixture Ordering Example: MXi / 17 / RGB / 7° / U / CES / 48 / REM / LV
Prefix
Wattage
Color
Optics
light
direction
Mounting
Fixture
Length
Power Supply
Location
Finish
Options
Mxi
STEP 2 – REMOTE RPS POWER SUPPLIES, WET LOCATION FOR RGB & RGBW- ORDER SEPARATELY
CATALOG NUMBER
RPS / 100 / DAT / WET
WATTAGE
(1)-100W Power/Data Supply (120V - 277V) for RGB or RGBW, WET LOCATION
NOTE: Due to remote power supply application variances, it is recommended to load the RPS Power Supplies at 80% of the wattage capacity.
For specific and case by case requirements, please contact factory for assistance.
ORDERING EXAMPLE: RPS / 100 / DAT / WET
STEP 3 – DMX SPLITTER/PROGRAMMING KIT - ORDER SEPARATELY (required for all COLOR CHANGING installations)
QTY
catalog #
DESCRIPTION
CDS-PK
DMX SPLITTER/LED PROGRAMMING KIT
One CDS-PK is required per RGB installation. CDS-PK consists of four outputs. Each output accommodates up to 32 fixtures in INT/REM wiring
methods and unlimted fixtures in ACV wiring method (every universe requires its own dedicated CDS-PK). The CDS-PK includes a LED programming
kit for field addressing. If additional splitters are required,order CDS-A per project requirements.
CDS-A
DMX SPLITTER ONLY (3 OUTPUTS)
CDS-A consists of three outputs. Each output accommodates up to 32 fixtures in INT/REM wiring methods and unlimted fixtures in ACV wiring method
CONTACT FACTORY FOR ADDITIONAL DMX SPLITTER CONFIGURATIONS
Insight Lighting
www.insightlighting.com
01/20/15
Page 2 of 5
MEDLEY Xi
®
SOLID STATE LIGHTING
EXTERIOR ARCHITECTURAL
LED LINEAR LIGHTING
RGB / RGBW COLOR CHANGING
EXTERIOR, REMOTE POWER SUPPLIES
RGB / RGBW COLOR CHANGING
CES - Close end mount, REMOTE POWER SUPPLY
Front View
Dim. A
2-1/4"
1-3/8"
1/4"
1/4"
180°
2-11/16"
4' Input Lead
2-5/8"
Dim. B
Mounting Bracket Detail
Fixture Length
1-3/8"
2-5/8"
5/8"
12"
24"
36"
48"
Dim. A
13-1/2"
25-1/2"
37-1/2"
49-1/2"
Dim. B
12-7/16"
24-7/16"
36-7/16"
48-7/16"
2X 1/2"
Insight Lighting
www.insightlighting.com
01/20/15
Page 3 of 5
REMOTE POWER SUPPLIES
EXTERIOR
DIGITAL POWER
SUPPLIES
EXTERIOR REMOTE POWER SUPPLY OPTIONS - WET LOCATION
DATA/SPLITTER OPTIONS FOR INTERIOR USE
RPS100 / 200 Power/Data Supply - FOR EXTERIOR USE
RPS-100-dat
- (1)-100W Data/Power Supply
- RPS-100 is conduit ready
Flying lead: 1/2" conduit by others
Cable ready: 1" conduit by others
not rated for plenum INSTALLATIONS
power / data splitter - CDS-PK FOR INTERIOR USE
3
88"
1
62"
5
18"
KNOCKOUTS
FOR 1/2"
CONDUIT
(BY OTHERS)
5"
10"
KNOCKOUTS
FOR 1/2"
CONDUIT
(BY OTHERS)
BACK SIDE VIEW
WITH MOUNTING DETAILS
SIDE VIEW
CDS 1 AND 2
IDE VIEW
2
Insight Lighting
www.insightlighting.com
01/20/15
Page 4 of 5
MEDLEY Xi
®
SOLID STATE LIGHTING
EXTERIOR ARCHITECTURAL
LED LINEAR LIGHTING
RGB / RGBW COLOR CHANGING
RGB / RGBW COLOR CHANGING
WIRING DIAGRAMS
RGB / RGBW - remote power supply
RPS 100 DAT
Lead
(no connector)
(DMX source by others)
RPS 100 DAT
Lead (no connector)
(DMX source by others)
Contact factory for additional wiring options.
Insight Lighting
www.insightlighting.com
01/20/15
Page 5 of 5

Download Report