Technical Information 5.1.1 103 BOF-UPE Non-Ferro Body filler Resin base: unsaturated polyester (UP) Products needed: Application and properties: Body Filler Hardener GK03-2800 SB48-3800 SC10-0710 Non-Ferro Body filler ● good adhesion to various metal substrates ● good filling properties ● fast drying ● excellent sandable ● VOC compliant Substrates/Pre-treatment: Well-cured old paintwork Bare steel Galvanised steel Aluminium Glass-fibre reinforced plastics Cleaning SV20-0505 SV22-0500 SV22-0500 SV22-0500 SV20-0530 Can be overcoated with: PRM-AKD, PRM-EPX, PRM-PUR, PRM-PVB Product details: Remove corrosion (e.g., rust) by sanding or blasting. On poorly cured old paintwork and e-coated OEM parts, sand large area around damaged spots down to the bare metal. Apply body filler to bare metal only. Do not use this body filler on acid-treated surfaces or on surfaces primed with acid-catalysed products (etch primers) or 1K Primer Fillers. Excess peroxide will cause discoloration in the finish. Special Remark: BASF Coatings GmbH Glasuritstraße 1 | 48165 Münster Sanding P80-150 P80-150 P180-240 P150-180 P180-240 Final cleaning SV20-0505 SV22-0500 SV22-0500 SV22-0500 SV20-0530 2004/42/IIB(cII)(250)190 The EU limit value for this product (product category: b) in ready to use form is max. 250 g/l. The VOC content of this product is 190 g/l. It cannot be ruled out that this product contains particles < 0.1 µm The products are suitable for professional use only. Aug 2014 Germany The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.salcomix.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. Technical Information 5.1.1 103 BOF-UPE Non-Ferro Body filler Resin base: unsaturated polyester (UP) Application: Coarse and Fine Body Filler Remarks: Values reg. VOC, coverage, solid content and viscosity are based on a mixing ratio by Vol. with SB48-3800. Select thinner acc. ambient temperature and size of object to be painted. Paint system 103 BOF-UPE Non-Ferro Filler VOC 190 g/l Theor. Coverage at 1 µm - m²/kg Mixing ratio 103 BOF-UPE 100 % by weight SB48-3800 2-3 % by weight Hardener Thinner Solid Content ~98 % by weight . - Viscosity at 23°C DIN 4 high viskos - m²/L Film Thickness (DFT) Potlife 20°C Gloss at 60° Should not exceed 1 cm in total (with sanding in between) 4-5 min - Sanding Touch Dry 20°C 20-30 min - Ready for Assembling - 60°C - - - Drying at Object Temp. Sanding BASF Coatings GmbH Glasuritstraße 1 | 48165 Münster P80/P150 P240 (body-filled areas and old paintwork) Aug 2014 Germany The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all previous versions. You can obtain the latest version from our website at www.salcomix.com or directly from your sales partner. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. Recoatable -
© Copyright 2024 ExpyDoc
