TEMP-SURE FLYER 3-18-2014_Layout 1 7/8/14 11:52 AM Page 1 FEATURING CMA TEMP-SURE BOOSTER HEATERS Features A Hot Water Booster Option for Peace of Mind Booster Heater Booster Heater Booster Heater Model E-AH Also Available as E-Corner Model E-AH Also Available as EST-Corner Is your Low Temp dishmachine lacking an adequate supply of hot water to assure proper sanitation is taking place in the dishroom? We have the answer “CMA TEMP-SURE”. Rather than replace your existing water heater with something larger and more expensive, add the “TEMP-SURE” booster heater to your machine. The “TEMP-SURE” is mounted to the side of dishmachine, not requiring any of your valuable kitchen space. The “TEMP-SURE” provides an additional 40 degrees of temperature rise to your incoming dishmachine water supply, which will help prevent your existing water supply source from being over burdened. Have “PEACE OF MIND” that proper dishware sanitation is taking place and preventing health risks. (Available on most CMA dishmachines). Model B (Double) Also Available as Corner B Hot Water Booster Heater The cost to add the “TEMP-SURE” built in at the factory is only $2,098.00 (list price) and it can be purchased separately with a field kit for field installation for $2,184.00 (list price). *The “TEMP-SURE” requires a separate 208-230v 3 phase 40 amp power supply. CMA MIZER ® Registered Trademark DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIF. 92841 800-854-6417•714-898-8781•FAX 714-895-2141 www.cmadishmachines.com UL R LISTED COMMERCIAL DISHWASHER 864T 7-2014 Temp-Sure Sheet Back 7-2014_Temp-Sure Sheet Back 7/8/14 11:51 AM Page 1 CMA TEMP-SURETM Hot Water Assurance System For Dump And Fill Style Dishwashers DISHMACHINES WARNING: Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing and Safety codes. 1/2" MALE PIPE THREADS HEATER ROCKER SWITCH HEATER ROCKER SWITCH OUTLET 8 3/4" * CAUTION: WATER SOLENOID MUST BE PLUMBED AHEAD OF HEATER INLET. HEATER IS NOT A PRESSURE VESSEL. *INLET 7" FRONT BACK 3 PHASE WIRE SCHEMATIC ROCKER SWITCH CHANGES FOR 1-PHASE 3 2 8 (TIE STRAPS CHANGED AS SHOWN) ON HEATER HIGH LIMIT SWITCH RED RED BLUE TOP RED THERMOSTAT TOP L-2 L-1 T1 L-3 T-2 L-1 T-1 L-2 L-1 L-3 L-1 L -2 L-2 GROUND T-3 T2 Power Supply: Hook Up Wire With Highest Voltage On L-2. HEATER ROCKER SWITCH 5/16" MOUNTING HOLES (4) 25" OUTLET 24" 79/16" *INLET LEFT SIDE 1/2" MALE PIPE THREADS RIGHT SIDE The CMA-Temp-Sure TM option assures a continuous supply of 140°F hot water resulting in excellent dishmachine performance. The heater is custom-designed for fill and dump CMA single tank dishwashers as a factory added option or an infield add-on. The heater will also fit most competitor’s single tank dishmachines. C UL R LISTED US COMMERCIAL DISHWASHER 864T CMA 1/2" MALE PIPE THREADS 1" ELECTRICAL INLET SPECIFICATIONS: MODEL: CMA TEMP-SURETM MIN. INCOMING WATER TEMP. RISE AVAILABLE HOT WATER HEATER TANK CAPACITY ELECTRICAL RATING VOLTS 208 240 208 240 USA 100°F 40°F 90 GPH 2.6 GAL PHASE 1 1 3 3 METRIC (55°C) (22°C) (341LPH) (9.8L) AMPS 44 51 26 30 ® Registered Trademark CMA Dishmachines 12700 Knott Street, Garden Grove CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com CMA reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A. © 7-2014 CMA, Inc.
© Copyright 2024 ExpyDoc
